Enhancement of the Localization Effect during Electrochemical Machining of Inconel 718 by Using an Alkaline Solution
Source abstract
Abstract
Electrochemical machining (ECM) is a cost-effective method for the machining of difficult-to-cut Inconel 718 superalloy. However, the machining accuracy of ECM is still limited by the poor localization effect due to the existence of stray corrosion. In this paper, a mixed solution of neutral NaNO3 and alkaline NaOH is used to improve the localization effect during ECM of Inconel 718. The potentiodynamic polarization curves and current efficiencies for metal dissolution are measured, and the micro morphologies are examined. The results show that the use of an alkaline solution can promote the formation of a compact passive film on the surface of Inconel 718. ECM tests with cylindrical electrodes are specially designed to verify the effect of alkaline solution on the localization of anodic dissolution. The experimental results indicated that the stray corrosion of the non-machined surface of Inconel 718 alloy can be effectively eliminated by using a mixed solution of NaNO3 and NaOH. The surface roughness of the non-machined area can be noticeably improved.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Funding
China Natural Science Foundation, Foundation Research Project of Jiangsu Province ,Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology
References (31)
Show source-provided references
1. A review of developments towards dry and high speed machining of Inconel 718 alloy10.1016/S0890-6955(03)00159-7 ↗
2. Investigation of tool wear in the turning of Inconel 718 superalloy in terms of process performance and productivity enhancement10.1016/j.triboint.2017.10.005 ↗
3. Tool wear modelling through regression analysis and intelligent methods for nickel base alloy machining10.1016/j.cirpj.2011.03.009 ↗
4. New developments in electrochemical machining10.1016/S0007-8506(07)63235-1 ↗
5. Review of electrochemical and electrodischarge machining10.1016/j.procir.2013.03.002 ↗
6. Experimental research on the electrochemical machining of modern titanium- and nickel-based alloys for aero engine components10.1016/j.procir.2013.03.040 ↗
7. Surface characteristics of ECMed titanium work samples for biomedical applications10.1007/s00170-010-3040-5 ↗
8. New approach to enhance the accuracy of ECM high-precision short pulse ECM (HSPECM)10.1016/j.jmatprotec.2004.04.330 ↗
9. Electro-chemical micro drilling using ultra short pulses10.1016/j.precisioneng.2003.07.004 ↗
10. Stray current attack and stagnation zones in electrochemical drilling10.1007/s00170-004-2264-7 ↗
11. Improvement of hole exit accuracy in electrochemical drilling by applying a potential difference between an auxiliary electrode and the anode10.1016/j.jmatprotec.2013.11.008 ↗
12. Reduction of stray currents in counter-rotating electrochemical machining by using a flexible auxiliary electrode mechanism10.1016/j.jmatprotec.2016.08.008 ↗
13. Modelling the performance of ECM assisted by low frequency vibrations10.1016/j.jmatprotec.2007.02.032 ↗
14. Precision and efficiency of laser assisted jet electrochemical machining10.1016/j.precisioneng.2005.09.006 ↗
15. Micro-hole drilled by EDM-ECM combined processing10.4028/www.scientific.net/KEM.562-565.52 ↗
16. Electrochemical machining of the steel 100Cr6 in aqueous NaCl and NaNO3 solutions: Microstructure of surface films formed by carbids10.1016/S0013-4686(01)00561-8 ↗
17. The anodic dissolution of mild steel in solutions containing both Cl- and NaNO3-ions10.1016/S0010-938X(73)80017-4 ↗
18. Film breakdown on nickel under transpassive dissolution conditions in sodium nitrate solutions10.1149/1.2133334 ↗
19. Super finishing with ultrasonic and magnetic assistance in electrochemical micro-machining10.1016/j.electacta.2009.01.063 ↗
20. Influence of electrolyte concentration on copying accuracy of precision-ECM10.1016/S0007-8506(07)60556-3 ↗
21. Wire-electrochemical cutting with a NaNO3 electrolyte10.1016/0924-0136(94)01777-8 ↗
22. Effects of cobalt on high rate dissolution behaviour of nickel-base superalloys in NaNO3 and NaCl solutions10.1016/0141-6359(83)90033-8 ↗
23. Anodic dissolution behavior and surface texture development of cobalt under electrochemical machining conditions10.1016/j.electacta.2013.05.070 ↗
24. Reduction of stray corroison by using iron coating in NaNO3 solution during electrochemical machining10.1007/s00170-014-6351-0 ↗
25. Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO3 solution10.1016/j.electacta.2014.12.155 ↗
26. The mechanism of anodic dissolution of cobalt in neutral and alkaline electrolyte at high current density10.1016/j.electacta.2013.06.093 ↗
27. Electrochemical behavior of aluminum in concentrated NaOH solutions10.1016/S0010-938X(98)00107-3 ↗
28. Convex shaping process simulation during counter-rotating electrochemical machining by using the finite element method10.1016/j.cja.2015.06.022 ↗
29. Counter-rotating electrochemical machining of a combustor casing part using a frustum cone-like cathode tool10.1016/j.jmapro.2018.09.016 ↗
30. Nature of the passive film on nickel10.1016/S0013-4686(02)00552-2 ↗
31. AEX/XPS study of transpassive films on iron in nitrate solution10.1149/1.2115329 ↗