Show source-provided references
1. Engineering classification of jointed rock masses
2. Bieniawski, Z.T. (1989). Engineering Rock Mass Classifications: A Complete Manual for Engineers and Geologists in Mining, Civil, and Petroleum Engineering, John Wiley & Sons.
4. Grimstad, E., and Barton, N. (1993, January 22–26). Updating the Q-System for NMT. Proceedings of the International Symposium on Sprayed Concrete-Modern Use of Wet Mix Sprayed Concrete for Underground Support, Oslo, Norway.
6. Palmstrom, A. (1995). Rmi-A Rock Mass Characterization System for Rock Engineering Purposes. [Ph.D. Thesis, University of Oslo].
7. Recent developments in rock support estimates by the rmi
8. Rehman, H., Naji, A., Kim, J.-J., and Yoo, H.-K. (2018). Empirical evaluation of rock mass rating and tunneling quality index system for tunnel support design. Appl. Sci., 8.
10.3390/app8050782 ↗9. Kim, J., Rehman, H., Ali, W., Naji, A.M., and Yoo, H. (2019). Weightage effect during back-calculation of rock-mass quality from the installed tunnel support in rock-mass rating and tunneling quality index system. Appl. Sci., 9.
10.3390/app9102065 ↗10. Lowson, A., and Bieniawski, Z. (2013, January 23–26). Critical assessment of rmr based tunnel design practices: A practical engineer’s approach. Proceedings of the SME, Rapid Excavation and Tunnelling Conference, Washington, DC, USA.
11. NGI (2018, April 09). The Q-System, Rock Mass Classification and Support Design. Available online: https://www.ngi.no/eng/Publications-and-library/Books/Q-system.
13. Lee, J., Rehman, H., Naji, A., Kim, J.-J., and Yoo, H.-K. (2018). An empirical approach for tunnel support design through q and rmi systems in fractured rock mass. Appl. Sci., 8.
10.3390/app8122659 ↗14. Extension of tunneling quality index and rock mass rating systems for tunnel support design through back calculations in highly stressed jointed rock mass: An empirical approach based on tunneling data from himalaya
10.1016/j.tust.2018.11.050 ↗16. Rehman, H., Naji, A., Ali, W., Kim, J., Abdullah, R., and Yoo, H. (2019). Support Design for the Diversion Tunnel of Diamer Basha Dam, Pakistan, Considering The Recent Developments in Empirical Systems, IOP Publishing.
10.1088/1757-899X/527/1/012033 ↗17. Bieniawski, R.Z., Aguado, D., Celada, B., and Rodriquez, A. (2011). Forecasting tunnelling behaviour. T T Int., 39–42.
18. ASTMD-13e1 (2013). Standard Test Method for Rock Bolt Anchor Pull Test, ASTM International.
19. Dolinar, D.R., and Bhatt, S.K. (2000). Trends in roof bolt application. Proceedings: New Technology for Coal Mine Roof Support, NIOSH.
25. Aziz, N. (2004, January 28–30). Bolt surface profiles—An important parameter in load transfer capacity appraisal, Ground Support in Mining and Underground Construction. Proceedings of the Fifth International Symposium on Ground Support, Perth, Australia.
26. Barley, A.D., and Windsor, C.R. (2000, January 19–24). Recent advances in ground anchor and ground reinforcement technology with reference to the development of the art. Proceedings of the ISRM International Symposium.
28. Satola, I. (2007). The Axial Load-Displacement Behavior of Steel Strands Used in Rock Reinforcement, Helsinki University of Technology.
29. Aziz, N., and Webb, B. (2003, January 12–14). Study of load transfer capacity of bolts using short encapsulation push test. Proceedings of the 2003 Coal Operators, Wollongong, Austrália.
30. Signer, S.P. (1990). Field Verification of Load-Transfer Mechanics of Fully Grouted Roof Bolts, Bureau of Mines.
31. Jalalifar, H. (2006). A new approach in determining the load transfer mechanism in fully grouted bolts. [Ph.D. Thesis, University of Wollongong].
34. Goris, J. (1990, January 6–10). Laboratory evaluation of cable bolt supports. Proceedings of the 92nd Annual General Meeting of the CIM, Ottawa, ON, Canada.
35. Benmokrane, B., Chennouf, A., and Mitri, H. (1995). Laboratory evaluation of cement-based grouts and grouted rock anchors. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Elsevier.
10.1016/0148-9062(95)00021-8 ↗37. Kilic, A., and Anil, M. (2001, January 19–22). The effects of grout properties to the bolt capacity. Proceedings of the Sixteenth Mining Congress of Turkey, Ankara, Turkey.
38. Ulrich, B.F., Wuest, W.J., and Stateham, R.M. (1989). Relationships between annulus thickness and the integrity of resin-grouted roof bolts. Report of investigations, United States. Bureau of Mines.
39. Tadolini, S. (1998, January 4–6). The effects of reduced annulus in roof bolting performance. Proceedings of the 17th International Conference on Ground Control in Mining, Morgantown, WV, USA.
42. Martin, L.B. (2012). Theoretical and Experimental Study of Fully Grouted Rockbolts and Cablebolts Under Axial Loads, Ecole Nationale Supérieure des Mines de Paris.
43. Martin, L.B., Hassen, F.H., Tijani, M., and Noiret, A. (2011, January 26–29). A new experimental and analytical study of fully grouted rockbolts. Proceedings of the 45th US Rock Mechanics/Geomechanics Symposium, San Francisco, CA, USA.
45. Impacts of gloving and un-mixed resin in fully encapsulated roof bolts on geotechnical design assumptions and strata control in coal mines
10.1016/j.coal.2005.03.009 ↗49. Hoek, E., and Marinos, P. (2009, January 29–31). Tunnelling in overstressed rock. Proceedings of the ISRM Regional Symposium-EUROCK 2009, Cavtat, Croatia.
50. Kaiser, P., Yazici, S., and Nose, J. (1992). Effect of stress change on the bond strength of fully grouted cables. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Elsevier.
10.1016/0148-9062(92)93662-4 ↗52. Stability assessment of concrete lining and rock bolts of the adjacent tunnel by blast-induced vibration
53. Brady, B.H., and Brown, E.T. (2013). Rock Mechanics: For Underground Mining, Springer Science & Business Media.
54. Reinforcement mechanisms of rock bolt—A laboratory investigation
57. Unal, E. (1983). Development of design guidelines and roof-control standards for coal-mine roofs. [Ph. D Thesis, The Pennsylvania State University].
58. Li, F., Quan, X., Jia, Y., Wang, B., Zhang, G., and Chen, S. (2017). The experimental study of the temperature effect on the interfacial properties of fully grouted rock bolt. Appl. Sci., 7.
10.3390/app7040327 ↗59. Rehman, H., Ali, W., Naji, A., Kim, J.-J., Abdullah, R., and Yoo, H.-K. (2018). Review of rock-mass rating and tunneling quality index systems for tunnel design: Development, refinement, application and limitation. Appl. Sci., 8.
10.3390/app8081250 ↗60. Application of the convergence-confinement method of tunnel design to rock masses that satisfy the hoek-brown failure criterion
10.1016/S0886-7798(00)00046-8 ↗61. Gebirgsklassifizierung fur den stol lenbau