journal article·2019-12-19Open access

Degradation Prediction Model for Friction of Road Pavements with Natural Aggregates and Steel Slags

Bruno Crisman, Giulio Ossich, Paolo Bevilacqua, Roberto Roberti

Applied Sciences· Volume 10· Issue 1

Abstract

Steel production wastes (steel slags) are used more often in asphalt concrete pavements as a valuable replacement for natural aggregates, which are becoming increasingly rare. In this paper authors investigate the polishing characteristics of aggregates, and in particular of steel slags, used in bituminous road surfacing, are a major factor in determining the resistance to skidding. The main purpose of the study is the identification of a suitable degradation model, based on friction indicators, in the laboratory, as well as the comparison of in-situ pavement skid resistance with the cumulative number of passing vehicles over the years. The model predicts the expected resistance to skidding of the road surface based on the knowledge of the polished stone value (PSV) of the aggregates and the expected traffic on the road. In this study, several types of aggregates were compared: steel slag, limestone, limestone and slag mixture, diabase, Criggion stone and basalt. Using a standard PSV test, it was found that the aggregates did not reach the lower value of skid resistance (equilibrium value). The analysis of the British Portable Number (BPN) data versus polishing time allowed to empirically derive a regression model for each investigated aggregate. Hence, it appears possible to define both an investigatory level and threshold level to predict the actual residual life of the pavement from the examination of skid resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering and Architecture, University of Trieste, via Alfonso Valerio 6/2, 34127 Trieste, Italy

References (16)

Show source-provided references
1. Peter, C. (1997). Skid Resistance and Crashes: A Review of Literature, Reserch report ARR 311, TRB.
2. Field investigation of skid resistance degradation of asphalt pavement during early service skid resistance degradation of asphalt pavement10.1016/j.ijprt.2016.08.005 ↗
3. Deterioration trends of asphalt pavement friction and roughness from medium-term surveys on major Italian roads10.1016/j.ijprt.2017.07.002 ↗
4. Impact of traffic volume on pavement macrotexture and skid resistance long-term performance10.1177/0361198118821343 ↗
5. Noyce, D.A., Bahia, H.U., Yambó, J.M., and Kim, G. (2005). Incorporating road safety into pavement management: Maximizing asphalt pavement surface friction for road safety improvements. Draft Literature Review and State Surveys, Midwest Regional University Transportation Center, UMTRI.
6. Exploring the ageing effect of binder on skid resistance evolution of asphalt pavement10.1080/14680629.2010.9690346 ↗
7. Wilson, D.J., and Black, P.M. (2008, January 11–14). Comparison of skid resistance performance between greywacke and melter slag aggregates in New Zealand. Proceedings of the International Safer Roads Conference: Managing Roads and Runway Surfaces to Improve Safety, Cheltenham, UK. Available online: https://saferroadsconference.com/wp-content/uploads/2016/05/Douglas-Wilson-Comparison-of-Skid-Resistance-Performance-between-Greywackes-and-Melter-Slag-Aggregates-in-New-Zealand.pdf.
8. Szatkowski, W.S., and Hosking, J.R. (1972). Effect of Traffic and Aggregate on the Skidding Resistance of Bituminous Surfacings, Trasport and Road Research Laboratory. Laboratory Report LR 504.
9. Diringer, K.T., and Barros, R.T. (1990). Predicting the skid resistance of bituminous pavements through accelerated laboratory testing of aggregates. Surface Characteristics of Roadways: International Research and Technologies, ASTM International.10.1520/STP23353S ↗
10. Roe, P.G., and Hartshorne, S.A. (2019, September 30). The Polished Stone Value of Aggregates and in-Service Skidding Resistance, Wokingham. Available online: https://trl.co.uk/sites/default/files/TRL322.pdf.
11. Hot-mix asphalt pavement frictional resistance as a function of aggregate physical properties10.1080/14680629.2013.812842 ↗
12. Crisman, B., Ossich, G., and Roberti, R. (2016, January 27–29). Durability of wearing courses made with steelworks slag. Proceedings of the Eighth International Conference on Maintenance and Rehabilitation of Pavements, Singapore.10.3850/978-981-11-0449-7-110-cd ↗
13. Skid resistance of asphalt concrete at the construction stage based on thai aggregates10.1061/(ASCE)MT.1943-5533.0001662 ↗
14. Effect of cumulative traffic and statistical predictive modelling of field skid resistance10.1080/14680629.2017.1385511 ↗
15. UNI, UNI EN 1097-8 (2009). Tests for Mechanical and Physical Properties of Aggregates—Part 8: Determination of the Polished Stone Value, UNI.
16. UNI, UNI EN 13036-4 (2011). Road and airfield Surface Characteristics—Test Methods—Part 4: Method for Measurement of Slip/Skid Resistance of a Surface—The Pendulum Test, UNI.