Glassy PEEK-WC vs. Rubbery Pebax®1657 Polymers: Effect on the Gas Transport in CuNi-MOF Based Mixed Matrix Membranes
Source abstract
Abstract
Mixed matrix membranes (MMMs) are seen as promising candidates to overcome the fundamental limit of polymeric membranes, known as the so-called Robeson upper bound, which defines the best compromise between permeability and selectivity of neat polymeric membranes. To overcome this limit, the permeability of the filler particles in the MMM must be carefully matched with that of the polymer matrix. The present work shows that it is not sufficient to match only the permeability of the polymer and the dispersed phase, but that one should consider also the individual contributions of the diffusivity and the solubility of the gas in both components. Here we compare the gas transport performance of two different MMMs, containing the metal–organic framework CuNi-MOF in the rubbery Pebax®1657 and in the glassy poly(ether-ether-ketone) with cardo moiety, PEEK-WC. The chemical and structural properties of MMMs were investigated by means of FT-IR spectroscopy, scanning electron microscopy and EDX analysis. The influence of MOF on the mechanical and thermal properties of both polymers was investigated by tensile tests and differential scanning calorimetry, respectively. The MOF loading in Pebax®1657 increased the ideal H2/N2 selectivity from 6 to 8 thanks to an increased H2 permeability. In general, the MOF had little effect on the Pebax®165 membranes because an increase in gas solubility was neutralized by an equivalent decrease in effective diffusivity. Instead, the addition of MOF to PEEK-WC increases the ideal CO2/CH4 selectivity from 30 to ~48 thanks to an increased CO2 permeability (from 6 to 48 Barrer). The increase in CO2 permeability and CO2/CH4 selectivity is maintained under mixed gas conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Membrane Separation and Gas Transport · Advanced Battery Materials and Technologies · Metal-Organic Frameworks: Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute on Membrane Technology, CNR-ITM, Via P. Bucci 17/C, 87036 Rende (CS), Italy
Dipartimento di Chimica e Tecnologie Chimiche (CTC), Università della Calabria, 87036 Cosenza, Italy
Departamento de Química Inorgánica, Instituto de Ciencia Molecular (ICMol), Catedrático José Beltrán Martínez, 2, Universidad de Valencia, 46980 Paterna, Valencia, Spain
References (61)
Show source-provided references
1. Membranes for hydrogen separation10.1021/cr0501792 ↗
2. Recent progress and challenges in membrane-based O2/N2 separation10.1515/revce-2017-0094 ↗
3. Polymer membrane air separation performance for portable oxygen enriched combustion applications10.1016/j.enconman.2006.11.021 ↗
4. Membrane gas separation technologies for biogas upgrading10.1039/C5RA00666J ↗
5. Simultaneous production of biomethane and food grade CO 2 from biogas: An industrial case study10.1039/C8EE02897D ↗
6. 50th Anniversary Perspective: Polymers and Mixed Matrix Membranes for Gas and Vapor Separation: A Review and Prospective Opportunities10.1021/acs.macromol.7b01718 ↗
7. Membrane technologies for CO2 separation10.1016/j.memsci.2009.11.040 ↗
8. The upper bound revisited10.1016/j.memsci.2008.04.030 ↗
9. Correlation of separation factor versus permeability for polymeric membranes10.1016/0376-7388(91)80060-J ↗
10. Harnessing filler materials for enhancing biogas separation membranes10.1021/acs.chemrev.8b00091 ↗
11. The synthetic strategies of metal–organic framework membranes, films and 2D MOFs and their applications in devices10.1039/C9TA05383B ↗
12. Mixed matrix membranes for hydrocarbons separation and recovery: A critical review
13. Prasetya, N., Himma, N.F., Doddy Sutrisna, P., Wenten, I., and Ladewig, B.P. (2019). A Review on Emerging Organic-containing Microporous Material Membranes for Carbon Capture and Separation. Chem. Eng. J., 123575.10.1016/j.cej.2019.123575 ↗
14. A Drying-Free, Water-Based Process for Fabricating Mixed-Matrix Membranes with Outstanding Pervaporation Performance10.1002/anie.201607014 ↗
15. Effects of structural crystallinity and defects in microporous Al-MOF filled chitosan mixed matrix membranes for pervaporation of water/ethanol mixtures10.1016/j.jtice.2017.11.007 ↗
16. Fuoco, A., Khdhayyer, M.R., Attfield, M.P., Esposito, E., Jansen, J.C., and Budd, P.M. (2017). Synthesis and transport properties of novel MOF/PIM-1/MOF sandwich membranes for gas separation. Membranes, 7.10.3390/membranes7010007 ↗
17. Substantial breakthroughs on function-led design of advanced materials used in mixed matrix membranes (MMMs): A new horizon for efficient CO2 separation10.1016/j.pmatsci.2018.11.002 ↗
18. Ahmadi, M., Saravanan, J., Dai, Z., Ansaloni, L., and Deng, L. (2018). Performance of Mixed Matrix Membranes Containing Three-Dimensional (3D) Fillers for CO2 Separation A Review. Membranes, 8.10.3390/membranes8030050 ↗
19. The Postsynthetic Renaissance in Porous Solids10.1021/jacs.6b11259 ↗
20. The MOF-driven synthesis of supported palladium clusters with catalytic activity for carbene-mediated chemistry10.1038/nmat4910 ↗
21. A post-synthetic approach triggers selective and reversible sulphur dioxide adsorption on a metal-organic framework10.1039/C8CC04482A ↗
22. Poly(ether ether ketone) derivative membranes—A review of their preparation, properties and potential10.1134/S0965545X09110200 ↗
23. PEEKWC Ultrafiltration Hollow-Fiber Membranes: Preparation, Morphology, and Transport Properties10.1002/app.13207 ↗
24. Preparation of Asymmetric PEEKWC Flat Membranes with Different Microstructures by Wet Phase Inversion10.1002/app.20042 ↗
25. Asymmetric membranes of modified poly(ether ether ketone) with an ultra-thin skin for gas and vapour separations10.1016/j.memsci.2005.07.036 ↗
26. New PEEK-WC and PLA membranes for H2 separation10.1016/j.ijhydene.2017.04.060 ↗
27. Sulfonation of PEEK-WC polymer via chloro-sulfonic acid for potential PEM fuel cell applications10.1016/j.ijhydene.2010.06.067 ↗
28. Zeolite-based composite PEEK-WC membranes: Gas transport and surface properties10.1016/j.micromeso.2008.01.048 ↗
29. Mixed matrix membranes composed of sulfonated poly(ether ether ketone) and a sulfonated metal–organic framework for gas separation10.1016/j.memsci.2015.03.060 ↗
30. Pebax®/PAN hollow fiber membranes for CO2/CH4 separation10.1016/j.cep.2015.03.016 ↗
31. Separation performance of PEBAX/PEI hollow fiber composite membrane for SO2/CO2/N2 mixed gas10.1016/j.cej.2013.08.030 ↗
32. Supported PEBA-zeolite 13X nano-composite membranes for gas separation: Preparation, characterization and molecular dynamics simulation10.1016/j.ces.2018.04.067 ↗
33. Pebax®/TSIL blend thin film composite membranes for CO2 separation10.1007/s11426-016-5574-3 ↗
34. Synthesis, characterization and gas permeation study of ZIF-11/Pebax® 2533 mixed matrix membranes10.1016/j.jtice.2016.07.005 ↗
35. CO2/N2 separation performance of Pebax/MIL-101 and Pebax /NH2-MIL-101 mixed matrix membranes and intensification via sub-ambient operation10.1016/j.seppur.2020.116500 ↗
36. Ionic liquid-modified Pebax® 1657 membrane filled by ZIF-8 particles for separation of CO2 from CH4, N2 and H210.1016/j.memsci.2016.11.065 ↗
37. Mixed matrix formulations with MOF molecular sieving for key energy-intensive separations10.1038/s41563-017-0013-1 ↗
38. High speed spin coating in fabrication of Pebax 1657 based mixed matrix membrane filled with ultra-porous ZIF-8 particles for CO2/CH4 separation
39. CO2/CH4 separation by high performance co-casted ZIF-8/Pebax 1657/PES mixed matrix membrane10.1016/j.jngse.2016.03.067 ↗
40. Preparation of PEBAX-1074/modified ZIF-8 nanoparticles mixed matrix membranes for CO2 removal from natural gas10.1016/j.seppur.2019.115900 ↗
41. Mixed matrix membranes based on amine and non-amine MIL-53(Al) in Pebax® MH-1657 for CO2 separation10.1016/j.seppur.2018.02.038 ↗
42. Preparation of Amino Functionalized Titanium Oxide Nanotubes and Their Incorporation within Pebax/PEG Blended Matrix for CO2/CH4 Separation10.1016/j.cherd.2019.09.030 ↗
43. Efficient Gas Separation and Transport Mechanism in Rare Hemilabile Metal-Organic Framework10.1021/acs.chemmater.9b01995 ↗
44. Characterization and molecular simulation of Pebax-1657-based mixed matrix membranes incorporating MoS2 nanosheets for carbon dioxide capture enhancement10.1016/j.memsci.2019.04.025 ↗
45. Surface functionalized UiO-66/Pebax-based ultrathin composite hollow fiber gas separation membranes10.1039/C7TA07512J ↗
46. Matrix effect of mixed-matrix membrane containing CO2-selective MOFs10.1002/app.42853 ↗
47. Postsynthetic Improvement of the Physical Properties in a Metal-Organic Framework through a Single Crystal to Single Crystal Transmetallation10.1002/anie.201501691 ↗
48. Organic vapour transport in glassy perfluoropolymer membranes: A simple semi-quantitative approach to analyze clustering phenomena by time lag measurements10.1016/j.memsci.2010.10.063 ↗
49. Crank, J. (1975). The Mathematics of Diffusion, Clarendon Press.
50. A novel time lag method for the analysis of mixed gas diffusion in polymeric membranes by on-line mass spectrometry: Method development and validation10.1016/j.memsci.2018.04.029 ↗
51. 2D and 3D mixed MII/CuII metal-organic frameworks (M = Ca and Sr) with: N, N ′-2,6-pyridinebis(oxamate) and oxalate: Preparation and magneto-structural study10.1039/C8DT01686K ↗
52. Amine-functionalized CuBTC/poly(ether-b-amide-6) (Pebax® MH 1657) mixed matrix membranes for CO2/CH4 separation10.1002/cjce.22857 ↗
53. Cross-linked PEEK-WC proton exchange membrane for fuel cell10.1016/j.ijhydene.2009.08.024 ↗
54. Sorption and pervaporation study of methanol/dimethyl carbonate mixture with poly(etheretherketone) (PEEK-WC) membrane10.1016/j.memsci.2018.09.040 ↗
55. Force spectroscopy determination of Young’s modulus in mixed matrix membranes10.1016/j.polymer.2018.09.043 ↗
56. Effect of immobilizing adsorption on the diffusion time lag10.1002/pol.1969.160071015 ↗
57. Effect of immobilizing adsorption on mass transport through polymer films10.1016/S0376-7388(00)82136-5 ↗
58. Polymeric gas separation membranes10.1021/ma300213b ↗
59. The origin of size-selective gas transport through polymers of intrinsic microporosity10.1039/C9TA07159H ↗
60. Fine-Tuned Intrinsically Ultramicroporous Polymers Redefine the Permeability/Selectivity Upper Bounds of Membrane-Based Air and Hydrogen Separations10.1021/acsmacrolett.5b00512 ↗
61. Redefining the Robeson upper bounds for CO2/CH4 and CO2/N2 separations using a series of ultrapermeable benzotriptycene-based polymers of intrinsic microporosity10.1039/C9EE01384A ↗