journal article·2020-07-06Open access

Application of Multiple Unipolar Axial Eddy Current Brakes for Lightweight Electric Vehicle Braking

Mufti Reza Aulia Putra, Muhammad Nizam, Dominicus Danardono Dwi Prija Tjahjana, Muhammad Aziz, Aditya Rio Prabowo

Applied Sciences· Volume 10· Issue 13

Abstract

The braking system in a vehicle has the main role of slowing down the speed or stopping the moving vehicle. Compared to mechanical braking, which utilizes friction, non-contact braking has several advantages, including longer lifetime and less maintenance. One form of non-contact braking systems is the eddy current brake (ECB), an electric braking system that employs eddy currents to operate. This research focuses on the impact of magnetic field sources used in the ECB. In addition, the number of magnetic field sources is also observed. In order to achieve an ECB design that can be easily applied in any types of vehicles, including motorcycles and compact cars, a compact ECB design with an excellent braking torque is required. In this study, a compact design of the ECB is obtained by distributing the required braking torque from the disc brake into multiple electromagnets. Finite element method-based modeling has been performed to study ECB parameters, including the number of coil winding, the number of electromagnets, and the electric current. The results of this study show that the developed compact ECB could produce 93.66% of the torque required for braking.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electric Motor Design and Analysis · Magnetic Bearings and Levitation Dynamics · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Surakarta 57126, Indonesia

Electrical Engineering Department, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A, Surakarta 57126, Indonesia

National Center for Sustainable Transportation Technology (NCSTT) ITB, Bandung 40132, Indonesia

Lithium Battery Research and Technology Centre, Universitas Sebelas Maret, Jl. Slamet Riyadi 435, Surakarta 57146, Indonesia

Institute of Industrial Science, The University of Tokyo, Tokyo 153-8505, Japan

Funding

Kementerian Riset, Teknologi dan Pendidikan Tinggi

References (36)

Show source-provided references
1. Self-Excited Induction Generator as an Auxiliary Brake for Heavy Vehicles and Its Analog Controller10.1109/TIE.2014.2379218 ↗
2. Analysis and Performance of the Self Excited Eddy Current Brake10.5370/JEET.2017.12.1.459 ↗
3. Zou, N., Wang, Q., Wang, W., and Zeng, X. (2009, January 11–12). Simulation Study of CVT Ratio Control for Engine Braking. Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation, Zhangjiajie, China.10.1109/ICMTMA.2009.541 ↗
4. Nizam, M., Mohamed, A., and Hussain, A. (2007, January 11–12). Dynamic voltage collapse prediction on a practical power system using power transfer stability index. Proceedings of the 2007 5th Student Conference on Research and Development, SCORED, Selangor, Malaysia.10.1109/SCORED.2007.4451398 ↗
5. Sutopo, W., Astuti, R.W., Purwanto, A., and Nizam, M. (2013, January 26–28). Commercialization model of new technology lithium ion battery: A case study for smart electrical vehicle. Proceedings of the 2013 Joint International Conference on Rural Information and Communication Technology and Electric-Vehicle Technology, rICT and ICEV-T, Bandung, Indonesia.10.1109/rICT-ICeVT.2013.6741511 ↗
6. Torque Analysis and Measurements of Cylindrical Air-Gap Synchronous Permanent Magnet Couplings Based on Analytical Magnetic Field Calculations10.1109/TMAG.2013.2239265 ↗
7. Dissipation of Frictional Energy from the Interface of an Annular Disc Brake10.1243/PIME_PROC_1984_198_146_02 ↗
8. Permanent-Magnet Linear Eddy-Current Brake with a Non-Magnetic Reaction Plate10.1049/ip-epa:19990574 ↗
9. Design of Robust Speed and Slip Controllers for a Hybrid Electromagnetic Brake System10.1049/iet-epa.2014.0256 ↗
10. Gulbahce, M.O., Kocabas, D.A., and Nayman, F. (2013, January 28–30). Investigation of the Effect of Pole Shape on Braking Torque for a Low Power Eddy Current Brake by Finite Elements Method. Proceedings of the 2013 8th International Conference on Electrical and Electronics Engineering (ELECO), Bursa, Turkey.10.1109/ELECO.2013.6713844 ↗
11. Comparison of Three Types of Permanent Magnet Linear Eddy-Current Brakes According to Magnetization Pattern10.1109/TMAG.2003.816723 ↗
12. A Magnetic Brake for Small Wind Turbines10.4283/JMAG.2012.17.1.033 ↗
13. Analytical Modeling of Eddy Current Brakes with the Application of Time Varying Magnetic Fields10.1016/j.apm.2015.07.006 ↗
14. Fabrication of a Novel Contactless Switch Using Eddy Current Displacement Sensor for Safer Vehicle Brake System10.1109/TVT.2011.2128898 ↗
15. Li, P., Ma, J., and Fang, Y. (2011, January 10–12). Design and Analysis of Hybrid Excitation Rail Eddy Current Brake System of High-Speed Train. Proceedings of the 2011 IEEE International Conference on Service Operations, Logistics and Informatics, Beijing, China.10.1109/SOLI.2011.5986624 ↗
16. Development of Hybrid Rail Brake10.1243/PIME_PROC_1995_209_257_02 ↗
17. Design and Analysis of the Hybrid Excitation Rail Eddy Brake System of High-Speed Trains10.1631/jzus.A11GT002 ↗
18. Ryoo, H.J., Kim, J.S., Kang, D.H., Rim, G.H., Kim, Y.J., and Won, C.Y. (2000). Design and Analysis of an Eddy Current Brake for a High-Speed Railway Train with Constant Torque Control, IEEE.
19. Design & Fabrication of Eddy Current Braking System
20. Performance Analysis of a Cylindrical Eddy Current Brake10.1049/iet-epa.2012.0006 ↗
21. Sharif, S., and Sharif, K. (2009, January 18–20). Influence of Skin Effect on Torque of Cylindrical Eddy Current Brake. Proceedings of the 2009 International Conference on Power Engineering, Energy and Electrical Drives, Lisbon, Portugal.10.1109/POWERENG.2009.4915143 ↗
22. Unipolar Induction Braking of Thin Metal Sheets10.1049/piee.1972.0296 ↗
23. Theory of Eddy-Current Brakes with Thick Rotating Disc10.1049/piee.1977.0067 ↗
24. Design of Permanent Magnet Eddy Current Brake for a Small Scaled Electromagnetic Launch Model10.1063/1.3679698 ↗
25. Effect of Regenerative Braking Energy on Battery Current Balance in a Parallel Hybrid Gasoline-Electric Vehicle under FTP-75 Driving Mode10.1007/s12239-016-0084-z ↗
26. Research on an Integrated Electromagnetic Auxiliary Disc Brake Device for Motor Vehicle10.1002/tee.22395 ↗
27. Luo, N., Jiang, J., and Yu, A. (2014, January 3–5). Research on the Control Strategy of the Regenerative Braking System. Proceedings of the 2014 International Conference on Mechatronics and Control (ICMC), Jinzhou, China.10.1109/ICMC.2014.7232021 ↗
28. Meier, S., and Hahn, I. (November, January 29). Modeling Single and Double Stator Axial Eddy Current Brakes Considering Current Displacement, Magnetic Leakage, Fringing and Saturation Using Coupled Electric and Magnetic Equivalent Circuits. Proceedings of the IECON Proceedings (Industrial Electronics Conference), Dallas, TX, USA.
29. Shiau, J.K., Ma, D.M., and Jou, M. (2008). Analysis and Experiments of Eddy Current Brakes with Moving Magnets. Materials Science Forum, Trans Tech Publications Ltd.10.4028/www.scientific.net/MSF.575-578.1299 ↗
30. Singh, A.K. (2015, January 12–13). Model Development of Eddy Current Brakes for Energy Absorbing System. Proceedings of the 2015 International Conference on Recent Developments in Control, Automation and Power Engineering (RDCAPE), Noida, India.10.1109/RDCAPE.2015.7281429 ↗
31. On Eddy Currents in a Rotating Disk10.1109/EE.1942.6436528 ↗
32. Waloyo, H.T., Nizam, M., and Putra, M.R.A. (2019, January 18–21). Characterization of Pole Location on Unipolar Axial Eddy Current Brake. Proceedings of the 2019 6th International Conference on Electric Vehicular Technology (ICEVT), Bali, Indonesia.
33. Mini Review on the Design of Axial Type Eddy Current Braking Technology
34. Axial-Flux Wound-Excitation Eddy-Current Brakes: Analytical Study and Parametric Modeling
35. Hybrid Electromagnetic Brakes: Design and Performance Evaluation10.1109/TEC.2014.2333777 ↗
36. Jin, Y., Kou, B., Zhang, L., Zhang, H., and Zhang, H. (2016, January 13–16). Magnetic and Thermal Analysis of a Halbach Permanent Magnet Eddy Current Brake. Proceedings of the 19th International Conference on Electrical Machines and Systems (ICEMS), Chiba, Japan.