Shear Response of Members without Shear Reinforcement—Experiments and Analysis Using Shear Crack Propagation Theory (SCPT)
Source abstract
Abstract
The determination of the ultimate shear capacity and the identification of the corresponding load-carrying mechanisms of concrete members without shear reinforcement has been an ongoing research topic for over 100 years. Based on a full mechanical model, the Shear Crack Propagation Theory (SCPT) enables to analyze and understand the ever-changing interplay of crack propagation, evolution of stresses at the crack tip and in uncracked concrete parts, as well as the activation of shear transfer actions within the growing shear crack during the entire loading process. In this paper, selected experimental investigations for further validation of the SCPT are presented. These beam shear test results are then compared to the theoretical results emerging from the SCPT algorithm. Finally, the evolution of different shear transfer actions (e.g., aggregate interlock and dowel action) during the entire loading process is evaluated and discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Structural Concrete, RWTH Aachen University, 52074 Aachen, Germany
Materials and Constructions, KU Leuven, De Nayer Campus, 2860 Sint-Katelijne-Waver, Belgium
Funding
German Research Foundation (DFG - Deutsche Forschungsgemeinschaft)
References (49)
Show source-provided references
1. Adam, V., and Hegger, J. (2018, January 29–31). Investigations on influence factors on shear in structural components without shear reinforcement. Proceedings of the 12th fib International PhD Symposium in Civil Engineering, Prague, Czech Republic.
2. Experimentelle Untersuchungen zum Einfluss der Bauteilbreite und der Schubschlankheit auf die Querkrafttragfähigkeit von Stahlbetonplatten ohne Querkraftbewehrung10.37544/0005-6650-2018-01-61 ↗
3. Beam Shear Strength Prediction by Analysis of Existing Data
4. Leonhardt, F., Walther, R., and Dilger, W. (1964). Schubversuche an Durchlaufträgern (Zweifeldrige Stahlbetonbalken mit und ohne Schubbewehrung): DAfStb-Heft 163, Ernst & Sohn.
5. Regan, P.E., and Taylor, H.P.J. (1978). Design of Concrete Structures with Reagrd to Shear Forces. Shear and Torsion: Explanatory and Viewpoint Papers on Model Code Chapters 11 and 12 Prepared by Members of CEB Commission V, International Federation for Structural Concrete.
6. Size Effect in Shear Failure of Longitudinally Reinforced Beams
7. Ghannoum, W.M. (1998). Size Effect on Shear Strength of Reinforced Concrete Beams. [Master’s Thesis, Mc Gill University].
8. Empirical Modeling of Reinforced Concrete Shear Strength Size Effect for Members without Stirrups
9. Bazant, Z.P., and Planas, J. (1998). Fracture and Size Effect in Concrete and Other Quasibrittle Materials, CRC Press.
10. Shear Strength of Members without Transverse Reinforcement as Function of Critical Shear Crack Width
11. The Modified Compression-Field Theory for Reinforced Concrete Elements Subjected to Shear
12. A new approach to shear design of slender reinforced concrete members without transverse reinforcement10.1016/j.engstruct.2015.04.015 ↗
13. Investigation of the shear behavior of RC beams on the basis of measured crack kinematics10.1016/j.engstruct.2016.01.025 ↗
14. Cavagnis, F. (2017). Shear in Reinforced Concrete without Transverse Reinforcement: From Refined Experimental Measurements to Mechanical Models. [Ph.D. Thesis, Ecole Polytechnique Fédérale de Lausanne].
15. One-Way Shear Design Method Based on a Multi-Action Model: A compromise between simplicity and accuracy
16. Zink, M. (1999). Zum Biegeschubversagen Schlanker Bauteile aus Hochleistungsbeton Mit und Ohne Vorspannung. [Ph.D. Thesis, Universität Leipzig].10.1007/978-3-663-05914-1 ↗
17. Diagonal Shear Failure and Size Effect in RC Beams without Web Reinforcement10.1061/(ASCE)0733-9445(2001)127:7(733) ↗
18. Simplified Modified Compression Field Theory for calculating shear strength of reinforced concrete members
19. Yang, Y. (2014). Shear Behaviour of Reinforced Concrete Members without Shear Reinforcement: A New Look at an Old Problem. [Ph.D. Thesis, Delft University of Technology].
20. Shear Behavior of Reinforced Concrete Beams without Transverse Reinforcement Based on Critical Shear Displacement10.1061/(ASCE)ST.1943-541X.0001608 ↗
21. Mechanical model for the shear capacity of R/C beams without stirrups: A proposal based on limit analysis10.1016/j.engstruct.2016.02.035 ↗
22. Schubverhalten von Biegebauteilen ohne Querkraftbewehrung10.1002/best.201400058 ↗
23. From experimental evidence to mechanical modeling and design expressions: The Critical Shear Crack Theory for shear design
24. Ultimate Shear Force of Structural Concrete Members without Transverse Reinforcement Derived from a Mechanical Model
25. Classen, M. (2020). Shear Crack Propagation Theory (SCPT)–The mechanical solution to the riddle of shear in RC members without shear reinforcement. Eng. Struct., 210.10.1016/j.engstruct.2020.110207 ↗
26. Sucharda, O. (2020). Identification of Fracture Mechanic Properties of Concrete and Analysis of Shear Capacity of Reinforced Concrete Beams without Transverse Reinforcement. Materials, 13.10.3390/ma13122788 ↗
27. Malm, R. (2009). Predicting Shear Type Crack Initiation and Growth in Concrete with Non-linear Finite Element Method. [Ph.D. Thesis, Royal Institute of Technology].
28. Numerische Simulation von balken- und plattenförmigen Bauteilen aus Stahlbeton und UHPC mit einem plastischen Schädigungsmodell10.37544/0005-6650-2016-02-28 ↗
29. Simulation of crack growth in reinforced concrete beams using extended finite element method10.1016/j.engfailanal.2020.104698 ↗
30. Finite element analysis of shear deformation in reinforced concrete shear-critical beams10.1080/15732479.2017.1360915 ↗
31. Assessment of shear capacity of concrete bridge deck slabs using theoretical formulations and FEM analysis10.1088/1757-899X/566/1/012036 ↗
32. Evaluation of one-way shear behaviour of reinforced concrete slabs: Experimental and numerical analysis10.1080/19648189.2017.1371646 ↗
33. Cervenka, V., Cervenka, J., Pukl, R., and Sajdlova, T. (June, January 29). Prediction of Shear Failure of Large Beams Based on Fracture Mechanics. Proceedings of the 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures, FraMCoS-9, Berkeley, CA, USA.
34. A scalar damage model with a shear retention factor for the analysis of reinforced concrete structures: Theory and validation10.1016/S0045-7949(00)00178-4 ↗
35. Microplane Model for Brittle-Plastic Material: I. Theory
36. Ungermann, J., Adam, V., and Classen, M. (2020). Fictitious Rough Crack Model (FRCM): A Smeared Crack Modelling Approach to Account for Aggregate Interlock and Mixed Mode Fracture of Plain Concrete. Materials, 13.10.3390/ma13122774 ↗
37. Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Elements10.1016/0008-8846(76)90007-7 ↗
38. Behavior of Concrete under Biaxial Stresses10.1061/JMCEA3.0001789 ↗
39. Deutsches Institut für Normung e.V. (2019). Prüfung von Festbeton-Teil 3: Druckfestigkeit von Probekörpern: Deutsche Fassung EN 12390-3:2019, Beuth.
40. Deutsches Institut für Normung e.V. (2019). Prüfung von Festbeton-Teil 13: Bestimmung des Elastizitätsmoduls unter Druckbelastung (Sekantenmodul): Deutsche Fassung EN 12390-13:2019, Beuth.
41. European Standard (2014). Eurocode 2: Design of Concrete Structures–Part 1-1: General Rules and Rules for Buildings. Incl. Corrigendum 1: EN 1992-1-1:2004/AC:2008, Incl. Corrigendum 2: EN 1992-1-1:2004/AC:2010, incl. Amendment 1: EN 1992-1-1:2004/A1:2014, European Committee for Standardization.
42. Deutscher Ausschuss für Stahlbeton (2012). Erläuterungen zu DIN EN 1992-1-1 und DIN EN 1992-1-1/NA (Eurocode 2): DAfStb-Heft 600, Beuth.
43. Theory and Experiments on the Mechanical Behaviour of Cracks in Plain and Reinforced Concrete Subjected to Shear Loading
44. Shear strength of concrete members without transverse reinforcement: A mechanical approach to consistently account for size and strain effects10.1016/j.engstruct.2015.05.007 ↗
45. A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack10.1016/j.engstruct.2017.12.004 ↗
46. Shear Strength of FRP-Reinforced Concrete Beams without Transverse Reinforcement
47. Influence of Constituents of Concrete on Its Tensile Strength and Shear Strength
48. Unified Shear Strength Model for Reinforced Concrete Beams-Part I: Development
49. Shear Strength of Reinforced Concrete T-Beams without Transverse Reinforcement