Replacement of Vanadium by Ferrovanadium in a Ti-Based Body Centred Cubic (BCC) Alloy: Towards a Low-Cost Hydrogen Storage Material
Source abstract
Abstract
We report here the effect on hydrogen sorption behavior of replacing vanadium by ferrovanadium (FeV) in Ti-V-Cr Body Centred Cubic (BCC) solid solution alloys. The compositions studied were Ti1.56V0.36Cr1.08 and Ti1.26V0.63Cr1.11. Both of the alloys were synthesized by melting with 4 wt % of Zr7Ni10 in order to enhance the first hydrogenation (i.e., activation) kinetics. The ferrovanadium substitution leads to the same microstructure as the vanadium pristine alloys and no significant change in the lattice parameters was found. However, a longer incubation time was observed in the activation process for the FeV substituted alloy. Finally, the replacement of vanadium by ferrovanadium did not have a noticeable impact on the hydrogen capacities, heat of formation, and entropy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen Storage and Materials · Catalysts for Methane Reforming · Catalysis and Hydrodesulfurization Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institut de Recherche sur l’Hydrogène, Université du Québec à Trois-Rivières, 3351 des Forges, Trois-Rivières, QC G9A-5H7, Canada
Université de Bordeaux, ICMCB, Métallurgie et Matériaux Fonctionnels, 87 Avenue du Dr Schweitzer, 33600 Pessac, France
References (28)
Show source-provided references
1. Reilly, J.J., Wiswall, R.H., Hoffman, K.C., and Waide, C.H. (1974). Metal Hydrides as Hydrogen Storage Media, Brookhaven National Laboratory.
2. Metallic Hydrides III: Body-Centered-Cubic Solid-Solution Alloys10.1557/mrs2002.225 ↗
3. New hydride phase with a deformed FCC structure in the Ti-V-Mn solid solution-hydrogen system10.1016/S0925-8388(00)01148-8 ↗
4. H2 absorbing-desorbing characterization of the Ti-V-Fe alloy system10.1016/0925-8388(95)01862-X ↗
5. Cost reduction possibilities of vanadium-based solid solutions—Microstructural, thermodynamic, cyclic and environmental effects of ferrovanadium substitution10.1016/j.jallcom.2015.07.110 ↗
6. Application of commercial ferrovanadium to reduce cost of Ti-V-based BCC phase hydrogen storage alloys (vol 476, pg 34, 2008)10.1016/j.msea.2009.01.007 ↗
7. Enhancement of cerium and hydrogen storage property of a low-cost Ti-V based BCC alloy prepared by commercial ferrovanadium10.1016/S1002-0721(09)60200-3 ↗
8. Effect of Al on microstructures and hydrogen storage properties of Ti26.5Cr20(V0.45Fe0.085)100−xAlxCe0.5 alloy10.1016/j.jallcom.2009.05.096 ↗
9. TiCr1.2(V-Fe)0.6—A novel hydrogen storage alloy with high capacity10.1016/j.stam.2003.12.001 ↗
10. A low-cost BCC alloy prepared from a FeV80 alloy with a high hydrogen storage capacity10.1016/j.jpowsour.2006.10.097 ↗
11. Preparation of (FeV80)48Ti26+xCr26 (x = 0–4) alloys by the hydride sintering method and their hydrogen storage performance10.1016/j.jallcom.2017.02.166 ↗
12. Improvement of cyclic durability of Ti–Cr–V alloy by Fe substitution10.1016/j.ijhydene.2011.07.019 ↗
13. Dependence of hydrogen storage capacity of TiCr1.8−X(VFe)X on V-Fe content10.1016/j.msea.2004.03.043 ↗
14. Effect of stoichiometry on hydrogen storage performance of Ti-Cr-VFe alloys10.1016/j.intermet.2004.12.024 ↗
15. Effect of heat treatment on microstructure and hydrogen storage properties of mass-produced Ti0.85Zr0.13(Fex–V)0.56Mn1.47Ni0.05 alloy10.1016/j.ijhydene.2012.12.023 ↗
16. Hydrogen storage in Ti-Mn-(FeV) BCC alloys10.1016/j.jallcom.2008.09.191 ↗
17. Hydrogen storage in TiCr1.2(FeV)x BCC solid solutions10.1016/j.jallcom.2008.04.062 ↗
18. Replacement of vanadium by ferrovanadium in Ti-based BCC alloys for hydrogen storage10.4028/www.scientific.net/SSP.170.144 ↗
19. Development of TiZrMn based hydrogen storage alloys for a soft actuator10.2320/matertrans.MG201410 ↗
20. Synthesis, characterization and hydrogen sorption properties of a Body Centered Cubic 42Ti–21V–37Cr alloy doped with Zr7Ni1010.1016/j.jallcom.2014.08.156 ↗
21. Crystal structure and hydrogen storage properties of body centered cubic 52Ti–12V–36Cr alloy doped with Zr7Ni1010.1016/j.jallcom.2014.04.062 ↗
22. BRUKER_AXS (2014). TOPAS V5: General Profile and Structure Analysis Software for Powder Diffraction Data, Bruker.
23. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
24. Hydrogen Absorption by Laves Phase Related BCC Solid Solution10.1016/S0966-9795(97)00088-5 ↗
25. Ti-V-Cr b.c.c. alloys with high protium content10.1016/S0925-8388(01)01647-4 ↗
26. Hydrogen sorption properties of compounds based on BCC Ti1−xV1−yCr1+x+y alloys10.1016/j.jallcom.2012.05.008 ↗
27. Isotope effect on structural transitions of Ti1.0Cr1.5V1.7Hx(Dx) with hydrogenation10.1016/S0925-8388(01)00898-2 ↗
28. Bibienne, T., Bobet, J.-L., and Huot, J. (2018). Université du Québec à Trois-Rivières, Trois-Rivières. Entropy-enthalpy compensation in Ti-V-Cr BCC alloys used as hydrogen storage materials, Unpublished work.