journal article·2015-10

Reassessment of the effects of Ce on quasicrystal formation and microstructural evolution in rapidly solidified Al–Mn alloys

F.G. Coury, W.J. Botta, C. Bolfarini, C.S. Kiminami, M.J. Kaufman

Acta Materialia· Volume 98
Publisher page

Abstract

Abstract Rapidly solidified Al–Mn–Ce alloys have been reported to exhibit desirable properties due to the uniform distribution of quasicrystalline (QC) particles in an Al matrix. In this study, several ternary alloy compositions that encompassed the alloys reported in the previous reports, namely Al–6Mn–2Ce, Al–6Mn–4Ce, Al–8Mn–4Ce, Al–12Mn–2Ce and Al–10Mn–5Ce, were prepared by melt spinning and their microstructures were characterized by electron microscopy and X-ray diffraction. The results are in direct contrast with the previous reports available in the literature in that the formation of QCs was only observed in the Al–12Mn–2Ce alloy; in the others, the dispersed phase was not the QC; rather, the structural and compositional information presented in this paper together with data recently published in the literature enabled a reinterpretation of the effect of Ce on rapidly solidified Al–Mn alloys. The main conclusion is that Ce favors the formation of a ternary metastable phase with approximate stoichiometry Al20Mn2Ce. This phase forms in a wide portion of the Al-rich region of the ternary phase diagram and can even coexist with the QC phase in alloys containing low amounts of Ce; in this case, the QC contains no detectable Ce by TEM/EDS, consistent with the conclusion that Ce does not favor QC formation in contrast to the previous reports.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Dubois · 2005
2. Metallic phase with long-range orientational translational symmetry10.1103/PhysRevLett.53.1951 ↗
3. Microstructure of an Al–Mn–Be–B alloy10.1016/j.jallcom.2014.07.212 ↗
4. Crystal–quasicrystal transition depending on cooling rates in directionally solidified Al–3Mn–7Be (at.%) alloy10.1016/j.intermet.2013.09.004 ↗
5. The formation condition of a stable Cu–Ga–Mg–Sc icosahedral quasicrystal10.1016/j.jnoncrysol.2003.11.004 ↗
6. Dual-phase glassy/nanoscale icosahedral phase materials in Cu–Zr–Ti–Pd system alloys10.1016/j.matchar.2014.07.014 ↗
7. Comments on quasicrystals and their potential use as catalysts10.1016/S1381-1169(97)00272-0 ↗
8. Effects of icosahedral phase formation on the microstructure and mechanical improvement of Mg alloys: a review10.1016/j.pnsc.2012.09.005 ↗
9. Quasicrystal-reinforced Mg alloys10.1088/1468-6996/15/2/024801 ↗
10. The ‘random’ square – triangle tiling: simulation of growth10.1016/S0921-5093(00)01142-4 ↗
11. Periodic and aperiodic arrangements of dodecagonal (Ta, V)151Te74 clusters studied by transmission electron microscopy. The method’s merits and limitations10.1016/S0921-5093(00)01090-X ↗
12. Hexagonal approximants of a dodecagonal tantalum telluride—the crystal structure of Ta21Te1310.1016/S0921-5093(00)01150-3 ↗
13. Electrochemical properties of Ti-based quasicrystal and ZrV2 laves phase alloy composite materials as negative electrode for Ni–MH secondly batteries10.1016/j.jnoncrysol.2012.05.035 ↗
14. Effect of Ce on electrochemical properties of the TiVNi quasicrystal material as an anode for Ni/MH batteries10.1016/j.ijhydene.2013.09.015 ↗
15. Critical slowing down in Zn–Mg–Ho quasicrystal10.1016/j.phpro.2012.04.071 ↗
16. Solution growth of a binary icosahedral quasicrystal of Sc12Zn8810.1103/PhysRevB.81.020201 ↗
17. Local structure in quasicrystal-forming Zr-based metallic glasses correlated with a stability of the supercooled liquid state10.1016/j.jnoncrysol.2007.05.135 ↗
18. Electron-irradiation-induced nano-crystallization in quasicrystal-forming Zr-based metallic glass10.1016/j.intermet.2009.02.009 ↗
19. High-strength aluminum alloys containing nanoquasicrystalline particles10.1016/S0921-5093(00)00656-0 ↗
20. Influence of the quenching conditions on the formation of the icosahedral phase in Al–Mn alloys10.1016/0025-5416(88)90376-X ↗
21. Thermal stability of the icosahedral phase in Ai–Mn (Mn=4–15at.%) alloys prepared by planar flow casting10.1016/0025-5416(88)90361-8 ↗
22. Single-crystal X-ray study of the decagonal phase of the system Al–Mn10.1107/S0108768189003654 ↗
23. A comparison of the decagonal phase in rapidly solidified Ai–Mn and Al–Pd alloys10.1016/0036-9748(86)90096-7 ↗
24. Quasicrystals and quasicrystal-related phases in the Al–Mn system10.1016/0025-5416(88)90351-5 ↗
25. The conditions of formation and stability of quasi-crystalline phases in aluminum–manganese alloys10.1134/S0036024406060057 ↗
26. Formation and stability range of the G phase in the Al–Mn system10.1016/0036-9748(86)90111-0 ↗
27. Fabrications and mechanical properties of bulk amorphous, nanocrystalline, nanoquasicrystalline alloys in aluminum-based system10.1016/S1471-5317(00)00004-3 ↗
28. Characterisation of nano-sized Al–Mn–(Mg) particles in AZ91 and their effect on Mg17Al12 precipitation10.1016/j.jallcom.2013.04.179 ↗
29. Synthesis and mechanical properties of cast quasicrystal-reinforced Al-alloys10.1016/S1359-6454(01)00045-3 ↗
30. Structural evolution of rapidly solidified Al–Mn and Al–Mn–Sr alloys10.1016/j.msea.2006.05.017 ↗
31. High mechanical strength of quasicrystalline phase surrounded by fcc-Al phase in rapidly solidified Al–Mn–Ce Alloys10.2320/matertrans1989.33.723 ↗
32. Wear behavior of Al90Mn8Ce2 alloy prepared by powder metallurgy10.1016/j.matdes.2004.01.002 ↗
33. Enhancement of the quasicrystal-forming ability in Al-based alloys by Be-addition10.1016/S0925-8388(02)00186-X ↗
34. Microstructure modification and quasicrystalline phase formation in Al–Mn–Si–Be cast alloys10.1016/j.msea.2003.10.004 ↗
35. Quasicrystalline phase in melt-spun Al–Mn–Be ribbons10.1016/j.jallcom.2006.11.041 ↗
36. Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems10.1016/S0079-6425(98)00005-X ↗
37. Nano-icosahedral Al–Mn–Ce phases: structure and local configuration
38. High strength Al-alloys with nano-quasicrystalline phase as main component10.1016/S0965-9773(99)00075-6 ↗
39. On the formation of phases by mechanical alloying and their thermal stability in Al–Mn–Ce system10.1016/j.powtec.2008.10.002 ↗
40. Phase stability in a powder-processed Al–Mn–Ce alloy10.1007/s10853-014-8086-6 ↗
41. Effect of Mo on stability of quasicrystalline phase in Al–Mn–Fe alloy10.1016/j.jallcom.2012.12.013 ↗
42. Characterization of dispersed intermetallic phases in rapidly quenched Al–Ti–Ce alloys10.1007/BF02663429 ↗
43. Electronic structure of complex Hume–Rothery phases and quasicrystals in transition metal aluminides10.1016/j.pmatsci.2005.01.001 ↗
44. Stoichiometry study on the binary compounds in the Mg–Ce system—Part I10.1016/j.jallcom.2008.07.042 ↗
45. Structure and physical properties of single crystal PrCr2Al20 and CeM2Al20 (M=V, Cr): a comparison of compounds adopting the CeCr2Al20 structure type10.1016/j.jssc.2012.06.035 ↗
46. Conditions for growth of extended Al-rich Al–Mn alloy solid solutions and Al–Al6Mn eutectic during rapid solidification10.1016/0001-6160(87)90255-0 ↗