journal article·2022-02

Achieving superior lithium storage performances of CoMoO4 anode for lithium-ion batteries by Si-doping dual vacancies engineering

Xuejia Wang, Ting Su, Yunan Luo, Lijun Quan, Linping Zhong, Ruizhi Li, Ting Zhou, Mengjiao Liu, Yan Zhao, Xin Lai, Jian Bi, Daojiang Gao

Acta Materialia· Volume 225
Publisher page

Abstract

Regarded as a promising anode material, CoMoO 4 can reveal higher theoretical capacity (980 mAh g −1 ) in the context of completely reversible electrochemical reaction. Unfortunately, the large volume expansion, low conductivity and inferior cyclic stability are non-negligible, which have greatly limited its further development and application. Herein, a series of CoMo 1- xSi x /2O 4-2 x ( x = 0, 0.1, 0.15, 0.2 and 0.25) anode materials have been successfully synthesized through a solid-state method. This heterovalent atom doped strategy can not only provide cationic vacancy (Mo vacancy) but also generate anionic vacancy (O vacancy). The results demonstrate that all the Si doped CoMoO 4 samples exhibit superior electrochemical performances than that of the pure CoMoO 4 although the produce of the dual vacancies has negligible influence on the microstructures of CoMoO 4 , which should be attributed to the synergistic effect of the Mo vacancy and O vacancy and thus leading to the lower optical band gap, the enhanced conductivity and the faster transport of lithium ions and electron. Particularly, when the content of Si-doping is set as 0.05, the obtained CoMo 0.9Si 0.05O 3.8 sample displays the highest capacity (847.4 mAh g −1) up to 300 cycles at a current density of 200 mA g −1 . This work paves an effective strategy for constructing dual vacancies to promote the electrochemical performance of transition metal oxide anode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries10.1039/c0ee00699h ↗
2. Recent progress in conversion reaction metal oxide anodes for Li-ion batteries10.1039/C7QM00175D ↗
3. A long cycle-life high-voltage spinel lithium-ion battery electrode achieved by site-selective doping10.1002/anie.202001454 ↗
4. Hydrothermal synthesis of hierarchical CoMoO4 microspheres and their lithium storage properties as anode for lithium ion batteries
5. A review of the development of full cell lithium-ion batteries: the impact of nanostructured anode materials10.1007/s12274-016-1171-1 ↗
6. MoS2 nanoflower-derived interconnected CoMoO4 nanoarchitectures as a stable and high rate performing anode for lithium-ion battery applications10.1021/acsami.9b20751 ↗
7. SnO2 as advanced anode of alkali-ion batteries: inhibiting Sn coarsening by crafting robust physical barriers, void boundaries, and heterophase interfaces for superior electrochemical reaction reversibility
8. How to improve the stability and rate performance of lithium-ion batteries with transition metal oxide anodes10.1557/jmr.2016.330 ↗
9. Recent advances in silicon-based electrodes: from fundamental research toward practical applications
10. Toward stable lithium-ion batteries: accelerating the transfer and alloying reactions of Sn-based anodes via coordination atom regulation and carbon hybridization10.1016/j.jpowsour.2021.230778 ↗
11. Nanoporous germanium as high-capacity lithium-ion battery anode10.1016/j.nanoen.2015.03.039 ↗
12. Amorphous Fe2O3 as a high-capacity, high-rate and long-life anode material for lithium ion batteries10.1016/j.nanoen.2013.12.001 ↗
13. A novel NiCo2O4 anode morphology for lithium-ion batteries10.1039/C5TA01928A ↗
14. Spinel ZnMn2O4 nanocrystal-anchored 3D hierarchical carbon aerogel hybrids as anode materials for lithium ion batteries10.1002/adfm.201400108 ↗
15. A robust route to Co2(OH)2CO3 ultrathin nanosheets with superior lithium storage capability templated by aspartic acid-functionalized graphene oxide10.1002/aenm.201901093 ↗
16. Interconnected Ni(HCO3)2 hollow spheres enabled by self-sacrificial templating with enhanced lithium storage properties10.1021/acsenergylett.6b00582 ↗
17. 3D flower-like MnCO3 microcrystals: evolution mechanisms of morphology and enhanced electrochemical performances10.1016/j.electacta.2017.08.104 ↗
18. Spherical mesoporous materials from single to multilevel architectures10.1021/acs.accounts.9b00357 ↗
19. Kinetic and electrochemical reaction mechanism investigations of rod-like CoMoO4 anode material for sodium-ion batteries10.1021/acsami.8b16324 ↗
20. Revealing the activation effects of high valence cobalt in CoMoO4 towards highly reversible conversion10.1016/j.nanoen.2019.104333 ↗
21. Sacrificial template formation of CoMoO4 hollow nanostructures constructed by ultrathin nanosheets for robust lithium storage10.1039/C6RA08534B ↗
22. The progress of cobalt-based anode materials for lithium ion batteries and sodium ion batteries10.3390/app10093098 ↗
23. Electrochemical intercalation of lithium in ternary metal molybdates MMoO4 (M: Cu, Zn, Ni and Fe)10.1016/j.jpowsour.2003.09.010 ↗
24. N-doped carbon encapsulated CoMoO4 nanorods as long-cycle life anode for sodium-ion batteries10.1016/j.jcis.2020.05.017 ↗
25. Hollow hydrangea-like and hollow spherical CoMoO4 micro/nano-structures: pH-dependent synthesis, formation mechanism, and enhanced lithium storage performance10.1016/j.jallcom.2019.01.234 ↗
26. Interconnected network of CoMoO4 submicrometer particles as high capacity anode material for lithium ion batteries10.1021/am302583c ↗
27. Rhombic dodecahedron-like CoMoO4/C composite: a facile construction and excellent electrochemical performances for lithium-ion batteries10.1016/j.ceramint.2020.06.206 ↗
28. CoMoO4 nanoparticles anchored on reduced graphene oxide nanocomposites as anodes for long-life lithium-ion batteries10.1021/am505983m ↗
29. Recent progress and perspectives of defective oxide anode materials for advanced lithium ion battery10.1016/j.enchem.2020.100045 ↗
30. Electrochemical performance of NixCo1-xMoO4 (0≤x≤1) nanowire anodes for lithium-ion batteries10.1186/1556-276X-7-35 ↗
31. Co0.8Zn0.2MoO4/C nanosheet composite: rational construction via a one-stone-three-birds strategy and superior lithium storage performances for lithium-ion batteries10.1021/acsami.9b13727 ↗
32. Engineering the electronic state of a perovskite electrocatalyst for synergistically enhanced oxygen evolution reaction10.1002/adma.201502024 ↗
33. Defect engineering on electrode materials for rechargeable batteries
34. Template-based engineering of carbon-doped Co3O4 hollow nanofibers as anode materials for lithium-ion batteries10.1002/adfm.201504695 ↗
35. Reversible magnesium and aluminium ions insertion in cation-deficient anatase TiO210.1038/nmat4976 ↗
36. Dual Vacancies: An effective strategy realizing synergistic optimization of thermoelectric property in BiCuSeO10.1021/jacs.5b01863 ↗
37. Realizing improved thermoelectric performance in BiI3-Doped Sb2Te3(GeTe)17 via introducing dual vacancy defects10.1021/acs.chemmater.0c00113 ↗
38. Nature-derived approach to oxygen and chlorine dual-vacancies for efficient photocatalysis and photoelectrochemistry10.1021/acssuschemeng.7b03847 ↗
39. Room-temperature activation of CO2 by dual defect-stabilized nanoscale hematite (Fe2-δO3-v): concurrent role of Fe and O vacancies10.1021/acsomega.7b01505 ↗
40. A hollow Co2SiO4 nanosheet Li-ion battery anode with high electrochemical performance and its dynamic lithiation/delithiation using in situ transmission electron microscopy technology10.1016/j.apsusc.2019.06.088 ↗
41. Template fabrication of amorphous Co2SiO4 nanobelts/graphene oxide composites with enhanced electrochemical performances for hybrid supercapacitors10.1021/acsaem.9b00511 ↗
42. Template-free synthesis of cobalt silicate nanoparticles decorated nanosheets for high performance lithium ion batteries10.1021/acssuschemeng.8b04037 ↗
43. Oxygen vacancies engineered CoMoO4 nanosheet arrays as efficient bifunctional electrocatalysts for overall water splitting10.1016/j.jcat.2019.10.025 ↗
44. Hollow Co2SiO4 microcube with amorphous structure as anode material for construction of high performance lithium ion battery10.1016/j.ceramint.2019.04.032 ↗
45. Surfactant-free nonaqueous synthesis of plasmonic molybdenum oxide nanosheets with enhanced catalytic activity for hydrogen generation from ammonia borane under visible light10.1002/anie.201309759 ↗
46. The influence of hydrogenation and oxygen vacancies on molybdenum oxides work function and gap states for application in organic optoelectronics10.1021/ja3026906 ↗
47. Effect of surface defect states on valence band and charge separation and transfer efficiency10.1038/srep32457 ↗
48. Oxygen defect-rich In-doped ZnO nanostructure for enhanced visible light photocatalytic activity10.1016/j.matchemphys.2020.122672 ↗
49. Photoinduced defect engineering: enhanced photothermal catalytic performance of 2D black In2O3-x nanosheets with bifunctional oxygen vacancies10.1002/adma.201903915 ↗
50. Self-assembly of hybrid Fe2Mo3O8-reduced graphene oxide nanosheets with enhanced lithium storage properties10.1039/c3ta01409f ↗
51. CoMn2O4 spinel hierarchical microspheres assembled with porous nanosheets as stable anodes for lithium-ion batteries10.1038/srep00986 ↗
52. Achieving fully reversible conversion in MoO3 for lithium ion batteries by rational introduction of CoMoO410.1021/acsnano.6b05150 ↗
53. A review on nanocomposite materials for rechargeable Li-ion batteries10.3390/app7070731 ↗
54. Enhanced electrochemical performance of CoMoO4 nanorods/reduced graphene oxide as anode material for lithium-ion batteries10.1016/j.electacta.2015.01.154 ↗
55. Electrospun lotus root-like CoMoO4@graphene nanofibers as high-performance anode for lithium ion batteries10.1016/j.electacta.2016.01.228 ↗
56. Rod-like porous CoMoO4@C as excellent anode for high performance lithium ion battery10.1016/j.jallcom.2019.03.283 ↗
57. Embedding CoMoO4 nanoparticles into porous electrospun carbon nanofibers towards superior lithium storage performance10.1016/j.jcis.2019.06.039 ↗
58. Hydrothermal synthesis MoO3@CoMoO4 hybrid as an anode material for high performance lithium rechargeable batteries10.1142/S1793604718501047 ↗
59. POM-based MOF-derived Co3O4/CoMoO4 nanohybrids as anodes for high-performance lithium-ion batteries10.1021/acsomega.0c03929 ↗