journal article·2012-02

Peculiar formation mechanism of a plateau stress region during dynamic compressive deformation of porous carbon steel with oriented cylindrical pores

Y.H. Song, M. Tane, H. Nakajima

Acta Materialia· Volume 60· Issue 3
Publisher page

Abstract

Abstract Dynamic and quasi-static compressive deformation of as-cast and normalized porous S15CK carbon steels with cylindrical pores oriented in one direction was investigated at 298 and 77 K, using the split Hopkinson pressure bar method and a universal testing machine, combined with an acoustic emission measurement system, to clarify the formation mechanism of a plateau stress region where deformation proceeds with almost no stress increase. Dynamic and quasi-static compressions perpendicular to the orientation of the pores at 298 and 77 K do not produce a plateau stress region in the as-cast and normalized porous S15CK, because the localized crack formation and slip deformation that originate from the large concentration of stress around pores promotes densification in the early stage of the stress–strain curves. When the samples undergo dynamic compression parallel to the pore direction at 77 K, the matrix becomes brittle, and cracks are easily formed. However, the pores do not easily collapse, because they are oriented along the compressive direction. Therefore, densification occurs at a higher strain level. In addition, the formation of small cracks in the matrix decreases the work hardening rate. As a result, a plateau stress region with high stress amplitude and wide strain range appears, which is independent of the microstructure. This mechanism for the formation of the plateau stress region is completely different from that of metal foams with isotropic pores, which is based on sequential inhomogeneous deformation. As a result, energy absorption 10 times that of commercial aluminum foams is achieved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Ashby · 2000
2. Gibson · 1997
3. Banhart · Prog Mater Sci · 2001 · 46 · 55910.1016/S0079-6425(00)00002-5 ↗
4. Baumeister · Mater Des · 1997 · 18 · 21710.1016/S0261-3069(97)00050-2 ↗
5. Fuganti · Adv Eng Mater · 2000 · 2 · 20010.1002/(SICI)1527-2648(200004)2:4<200::AID-ADEM200>3.0.CO;2-2 ↗
6. Deshpande · Int J Impact Eng · 2000 · 24 · 27710.1016/S0734-743X(99)00153-0 ↗
7. Dannemann · Mater Sci Eng A · 2000 · 293 · 15710.1016/S0921-5093(00)01219-3 ↗
8. Evans · Prog Mater Sci · 1999 · 43 · 17110.1016/S0079-6425(98)00004-8 ↗
9. Mukai · Scripta Mater · 2006 · 54 · 53310.1016/j.scriptamat.2005.10.062 ↗
10. Mukai · Scripta Mater · 1999 · 40 · 92110.1016/S1359-6462(99)00038-X ↗
11. Tan · J Mech Phys Solids · 2005 · 53 · 217410.1016/j.jmps.2005.05.007 ↗
12. Combaz · Acta Mater · 2010 · 58 · 459010.1016/j.actamat.2010.04.025 ↗
13. Amsterdam · Adv Eng Mater · 2008 · 10 · 87710.1002/adem.200800128 ↗
14. Amsterdam · Acta Mater · 2008 · 56 · 60910.1016/j.actamat.2007.10.034 ↗
15. Chino · Acta Mater · 2008 · 56 · 10510.1016/j.actamat.2007.09.002 ↗
16. Song · Metall Mater Trans A · 2010 · 41A · 210410.1007/s11661-010-0247-x ↗
17. Campana · Scripta Mater · 2009 · 60 · 67910.1016/j.scriptamat.2008.12.045 ↗
18. Esmaeelzadeh · Mater Sci Eng A · 2006 · 424 · 29010.1016/j.msea.2006.03.013 ↗
19. Tane · J Mater Res · 2010 · 25 · 117910.1557/JMR.2010.0147 ↗
20. Song · Scripta Mater · 2011 · 64 · 79710.1016/j.scriptamat.2011.01.006 ↗
21. Nakajima · Prog Mater Sci · 2007 · 52 · 109110.1016/j.pmatsci.2006.09.001 ↗
22. Nakajima · Proc Jpn Acad Ser B · 2010 · 86 · 88410.2183/pjab.86.884 ↗
23. Shapovalov · MRS Bull · 1994 · 19 · 2410.1557/S0883769400039476 ↗
24. Ikeda · Metall Mater Trans A · 2005 · 36A · 7710.1007/s11661-005-0140-1 ↗
25. Kolsky · Proc Phys Soc B · 1949 · 62 · 67610.1088/0370-1301/62/11/302 ↗
26. Tane · J Mater Res · 2010 · 25 · 197510.1557/JMR.2010.0261 ↗
27. Larson · Trans ASME · 1952 · 74 · 765
28. Ogawa · J Phys IV France · 1997 · 7 · 59910.1051/jp1:1997178 ↗
29. Tsuchida · Acta Mater · 2001 · 49 · 302910.1016/S1359-6454(01)00197-5 ↗
30. Mitrakovic · Ultrasonics · 1985 · 23 · 22710.1016/0041-624X(85)90018-6 ↗
31. Manes · Tribol Int · 2001 · 34 · 24710.1016/S0301-679X(01)00008-1 ↗
32. Blanchette · Eng Fract Mech · 1984 · 20 · 35910.1016/0013-7944(84)90140-1 ↗
33. Palmer · Mater Sci Eng · 1973 · 11 · 18110.1016/0025-5416(73)90076-1 ↗
34. Christian · Prog Mater Sci · 1995 · 39 · 110.1016/0079-6425(94)00007-7 ↗
35. Reid · Metall Mater Trans A · 1981 · 12 · 37110.1007/BF02648534 ↗
36. Meyers · Mater Sci Eng A · 2002 · 322 · 19410.1016/S0921-5093(01)01131-5 ↗
37. Meyers · Acta Mater · 2001 · 49 · 402510.1016/S1359-6454(01)00300-7 ↗
38. Ide · J Mater Res · 2006 · 21 · 18510.1557/jmr.2006.0016 ↗
39. Hyun · Mater Sci Eng A · 2001 · 299 · 24110.1016/S0921-5093(00)01402-7 ↗