journal article·2008-11Open access

A comparative study of the interfacial reaction between electroless Ni–P coatings and molten tin

K. Chen, C. Liu, D.C. Whalley, D.A. Hutt, J.F. Li, S.H. Mannan

Acta Materialia· Volume 56· Issue 19

Abstract

Abstract A comparative study of the reaction characteristics between molten tin and both as-plated and heat-treated Ni–P coatings was carried out, with a specific focus on the stability of the Ni3P intermetallic layer and its effects on the subsequent reaction. It was found that a continuous layer of Ni3P may be formed on both types of Ni–P during the interfacial reaction, despite the fact that heat-treated Ni–P is a two-phase mixture of Ni3P and Ni. The Ni3P formed on the heat-treated Ni–P was thinner than that on as-plated Ni–P. A mass conservation analysis of P revealed that no or limited P was lost into the molten tin when the Ni3P layer was thin, whereas a significant loss of P took place as the Ni3P thickness increased. It is proposed that the Ni3P phase is stable and may not undergo chemical decomposition during the interfacial reaction. The loss of P to the molten tin observed in the present study is most likely due to the crumbling of Ni3P particles into the liquid phase, as a result of the enhanced mass transport due to use of thin copper wire substrates rather than a planar surface. Finally, the results show that the Ni3P phase cannot act as an effective barrier layer to the attack of molten tin toward the substrate. Defects in the Ni3P were found to allow localized penetration of molten tin.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrodeposition and Electroless Coatings · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Keeler · Electron Pack Prod · 1989 · 29 · 14
2. Nowottnick M, Pape U, Wittke K, Scheel W. SMTA international conf proc, Chicago, IL, 2003, pp. 693–9.
3. Mannan · IEEE Trans Adv Pack · 2004 · 27 · 50810.1109/TADVP.2004.831843 ↗
4. Liu · Metall Mater Trans A · 2000 · 31A · 285710.1007/BF02830353 ↗
5. He · Thin Solid Films · 2004 · 462–463 · 37610.1016/j.tsf.2004.05.058 ↗
6. Hung · J Mater Res · 2000 · 15 · 253410.1557/JMR.2000.0363 ↗
7. Hung · J Mater Sci Mater-Mater El · 2000 · 11 · 58710.1023/A:1008920527395 ↗
8. Jang · J Appl Phys · 1999 · 85 · 845610.1063/1.370627 ↗
9. Hung · J Mater Sci Lett · 2000 · 19 · 175510.1023/A:1006735103744 ↗
10. Gawrilov · 1979
11. Riedel · 1991
12. Ibl · Electrochim Acta · 1959 · 1 · 310.1016/0013-4686(59)80003-7 ↗
13. Chen K, Li J, Liu C, Whalley DC, Hutt DA, Conway PP, et al. International conference of high temperature electronics (HITEN 2005). Paris France: 2005.
14. Vuorinen · J Appl Phys · 2006 · 99 · 02353010.1063/1.2166647 ↗
15. Kumar · Thin Solid Films · 2006 · 504 · 41010.1016/j.tsf.2005.09.059 ↗
16. Chen · 2006