journal article·2023-05

Effect of CMAS infiltration on the optical properties of thermal barrier coatings: Study of the mechanisms supported by FDTD simulations and ALD

F. Blanchard, M.J. Kadi, E. Bousser, B. Baloukas, M. Azzi, J.E. Klemberg-Sapieha, L. Martinu

Acta Materialia· Volume 249
Publisher page

Abstract

Thermal barrier coatings (TBCs), which protect metallic components in aircraft engines thanks their low thermal conductivity , must also be effective blockers of radiative heat. While their porous microstructure makes them highly reflective to visible and infrared light through scattering, it also renders them susceptible to degradation, particularly due to calcium-magnesium-alumino-silicate (CMAS) infiltration. This study explores its effect on the optical scattering coefficient of TBC yttria-stabilized zirconia (YSZ) topcoats deposited by atmospheric plasma spray (APS) with two different microstructures. Different CMAS compositions are investigated by isothermal melting into the coatings, resulting in a significant decrease of their reduced scattering coefficients by around 50%. To further study the evolution of their performance as the pores are filled, atomic layer deposition (ALD) is used to mimic CMAS infiltration in a controllable fashion. The results show that most of the performance loss occurs with very little material inserted into the pores and that a saturation point is quickly reached. This is explained by two mechanisms: pores approximately 2 µm in diameter and less are responsible for most of the optical performance and are filled up rapidly, while the refractive index contrast at every pore`s interface diminishes when material fills the voids. The obtained minimum scattering coefficient value is approximately half that of a pristine sample and matches with the values obtained by the CMAS melting approach. Finite-difference time-domain (FDTD) modeling is also shown to corroborate the observed saturation behavior and demonstrated to be a suitable tool for the design and optimization of future TBCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Glass properties and applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: a review10.1007/s11666-007-9148-y ↗
2. Thermal-barrier coatings for more efficient gas-turbine engines10.1557/mrs.2012.232 ↗
3. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
4. Impact of radiation on the wall heat load at a test bench gas turbine combustion chamber: measurements and CFD simulation
5. Heat transfer through plasma-sprayed thermal barrier coatings in gas turbines: a review of recent work10.1007/s11666-009-9337-y ↗
6. Materials design for the next generation thermal barrier coatings10.1146/annurev.matsci.33.011403.113718 ↗
7. A comparative experimental study on radiative properties of EB-PVD and air plasma sprayed thermal barrier coatings10.1115/1.4030243 ↗
8. Infrared radiative properties of EB-PVD thermal barrier coatings10.1016/j.ijheatmasstransfer.2015.11.063 ↗
9. Determination of scattering and absorption coefficients for plasma-sprayed yttria-stabilized zirconia thermal barrier coatings10.1111/j.1551-2916.2008.02349.x ↗
10. Analysis of thermal radiation effects on temperatures in turbine engine thermal barrier coatings10.1016/S0921-5093(97)00845-9 ↗
11. Determination of scattering and absorption coefficients for plasma-sprayed yttria-stabilized zirconia thermal barrier coatings at elevated temperatures10.1111/j.1551-2916.2009.03217.x ↗
12. Modeling the thermal radiation properties of thermal barrier coatings based on a random generation algorithm10.1016/j.ceramint.2016.03.067 ↗
13. Microstructural effect on the radiative properties of YSZ thermal barrier coatings (TBCs10.1016/j.ijheatmasstransfer.2014.01.063 ↗
14. Adhesion of volcanic ash particles under controlled conditions and implications for their deposition in gas turbines10.1002/adem.201500371 ↗
15. Influence of the composition and viscosity of volcanic ashes on their adhesion within gas turbine aeroengines10.1016/j.actamat.2016.02.011 ↗
16. Correlation between spraying conditions and microcrack density and their influence on thermal cycling life of thermal barrier coatings10.1361/10599630420443 ↗
17. Toward highly sintering-resistant nanostructured ZrO2-7 wt%Y2O3 coatings for TBC applications by employing differential sintering10.1007/s11666-008-9217-x ↗
18. Effect of thermal ageing on the optical properties and pore structure of thermal barrier coatings10.1016/j.surfcoat.2022.129080 ↗
19. Effect of CMAS infiltration on radiative transport through an EB-PVD thermal barrier coating10.1111/j.1744-7402.2008.02225.x ↗
20. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
21. Vapor-phase CMAS-induced degradation of adhesion of thermal barrier coatings10.1007/s11085-017-9715-7 ↗
22. ‘Development of a naturalistic test media for dust ingestion CMAS testing of gas turbine engine,’ in ‘thermal barrier coatings IV
23. Influence of pore characteristics of air plasma sprayed thermal barrier coatings on calcia-magnesia-alumino-silicate (CMAS) attack behavior10.1016/j.corsci.2021.109636 ↗
24. Tunable atomic layer deposition into ultra-high-aspect-ratio (>60000:1) aerogel monoliths enabled by transport modeling10.1021/acs.chemmater.1c00770 ↗
25. Application of Cr3+ photoluminescence piezo-spectroscopy to plasma-sprayed thermal barrier coatings for residual stress measurement10.1016/S0921-5093(00)00973-4 ↗
26. Modeling radiative properties of air plasma sprayed thermal barrier coatings in the dependent scattering regime10.1016/j.ijheatmasstransfer.2015.06.017 ↗
27. Generalized four-flux radiative transfer model10.1364/AO.37.002615 ↗
28. S.A. Prahl, Everything I think you should know about inverse adding-doubling, (2011). https://omlc.org/software/iad/manual.pdf (accessed November 16, 2022).
29. Van de Hulst · 1980
30. Tutorial on diffuse light transport10.1117/1.2967535 ↗
31. Refractive index of cubic zirconia stabilized with yttria10.1364/AO.21.002978 ↗
32. Tracking the calcium-magnesium-alumino-silicate (CMAS) infiltration into an air-plasma spray thermal barrier coating using X-ray imaging10.1016/j.scriptamat.2019.09.016 ↗
33. Pore filling behavior of air plasma spray thermal barrier coatings under CMAS attack10.1016/j.corsci.2020.108478 ↗
34. CMAS attack behavior of air plasma sprayed thermal barrier coatings with big pores10.1016/j.jeurceramsoc.2022.06.010 ↗
35. A comparative study of the optical and microstructural properties of suspension and atmospheric plasma sprayed thermal barrier coatings10.1016/j.surfcoat.2022.128949 ↗