journal article·2023-06-27Open access

Analysis and Test of the Tillage Layer Roll-Type Residual Film Recovery Mechanism

Zenglu Shi, Xuejun Zhang, Xiaopeng Liu, Mengchen Kang, Jieting Yao, Lei Guo

Applied Sciences· Volume 13· Issue 13

Abstract

With the extensive use of plastic film mulching in planting, the amount of residual plastic film in soil has been increasing, causing soil and water pollution, harming crop growth, and reducing agricultural product quality and yield. In response to this issue, this study proposes a roll-type residual film recovery mechanism using the tillage layer method. The structure and operation principles of this system are discussed, and a detailed analysis of its key components and working process is provided. The lifting cutter operates at a speed of 22.37 rad/s, the pick-up drum at 4.58 rad/s, the roll forward rotation picks up the film at 13.74 rad/s, and the roll reverse film rotation unloads the film at 17.57 rad/s, with the unloading wheel rotating at a speed of 4.5 rad/s. ADAMS (software of automatic dynamic analysis of mechanical systems) Version No.2019 is used for modeling and analysis, and the displacement and velocity change patterns of MARKER_499, MARKER_500, and MARKER_505, which are marked points of the spring-tooth tips and are found to be the same. The maximum resultant displacement of MARKER_499 and MARKER_500 is 22.146 mm when picking up plastic film and 17.047 mm when unloading plastic film. Meanwhile, the maximum resultant displacement of MARKER_500 and MARKER_505 is 231.715 mm in the film-picking area and 234.028 mm in the film-unloading area. After analyzing the velocity of MARKER_499 during picking and unloading of the film, it was determined that the absolute velocity for the picking direction was 79,809.407 mm/s, and for the unloading direction it was 10,2266.168 mm/s. Bench tests show a tillage gathering rate of 71.6% and a surface gathering rate of 83.4%, meeting the performance requirements of the roller-type residual film recovery mechanism. These findings provide a theoretical basis for the design of the structure and operational parameters for the roll-type residual film recovery mechanism using the tillage layer method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Irrigation Practices and Water Management · Soil Mechanics and Vehicle Dynamics · Engineering and Agricultural Innovations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi 830052, China

Key Laboratory of Intelligent Agricultural Equipment of Xinjiang, Urumqi 830052, China

Funding

National Natural Science Foundation of China · Xinjiang Autonomous Region Tianshan Youth Plan Project of China · Xinjiang Agricultural Machinery Integration Project

References (28)

Show source-provided references
1. The effect of the different overlay on growth and yield of spring peanut
2. Unloading film process analysis and high-speed photography experiment of pole-tooth residual plastic film collector
3. Jin, W., Liu, J., Xu, C., Zhang, X., and Bai, S. (2022). Design, Simulation and Experimentation of a Polythene Film Debris Recovery Machine in Soil. Appl. Sci., 12.10.3390/app12031366 ↗
4. Peng, Q., Li, K., Wang, X., Zhang, G., and Kang, J. (2023). Design and Test of Stripping and Impurity Removal Device for Spring-Tooth Residual Plastic Film Collector. Agriculture, 13.10.3390/agriculture13010042 ↗
5. Wang, H. (2011). Preparation and Performance Study of the Full-Degradable Polythene Films. [Master’s Thesis, Shangdong University of Science and Technology].
6. Parameter optimization and experiment for plastic film transport mechanism of shovel screen type plastic film residue collector
7. Research status and trends of plastic film residue collectors10.3901/JME.2012.21.041 ↗
8. Xue, S., Chen, X., Li, J., Wang, X., and Zhang, Z. (2021). Design of and Experiment on a Film Removal Device of an Arc-Toothed Residual Film Recovery Machine before Sowing. Appl. Sci., 11.10.3390/app11188551 ↗
9. Tuna, E. (2012). Producing Biodegradable Plastics Using Activated-Sludge Polyhydroxyalkanoates in Mixed Composition, University of California.
10. Effect of residual plastic films on survival rate of cotton seeds in South Xinjiang
11. Research status of domestic residual film recovery machine to take off the film device
12. Design and experiment of network chain type residual plastic film collector for peanut field
13. Design and test of clamping finger-chain type device for recycling agricultural plastic film
14. Design of Pick-up mechanism for the chain-teeth-rake topsoil incomplete plastic film recycling machine
15. Design and experiment on picking mechanism of chain tooth type plough residue film reclaiming machine
16. Performance test and motion simulation analysis of nail tooth type mechanismfor collecting plastic residue
17. Kinetic analysis of rotary tillage nail Tooth plastic film recycling machine hook film unit
18. Zhang, P. (2018). Design and Test Research of Rotary Tillage Nail Tooth Plastic Film Recycling Machine. [Master’s Thesis, Tarim University].
19. Optimization of pick-up teeth and roller for automatic unloading film recycling machine
20. Analysis and test of forward film removing mechanism for polythene film collector
21. Shi, Z., Zhang, X., Yan, J., Jiang, Y., and Yao, J. (2022). Experiment and Analysis of Film-Soil Separation Motion Characteristics of a Chain Drive Residual Film Recovery Mechanism for the Tillage Layer. Appl. Sci., 12.10.3390/app12125884 ↗
22. Design and test of combined operation machine for collecting nail-tooth plastic film
23. Analytical research on intensity of the arc spring-finger type plastic film residue pickup cylinder
24. Research on main components of the machine for retrieving the used plastic film after harvesting
25. (2021). Farm Waste Film-Pick Up Machines (Standard No. GB/T 25412-2021).
26. Zhao, W., Shi, Z., and Dai, F. (2015). ADAMS2013 Basic and Application Case Tutorial, Tsinghua University Press.
27. Analysis of kinetic characteristics and simulation of vibrating sieve of 4UX-550 potato harvester
28. (2019). Operation Quality of Residual Plastic Film Recycling Machine (Standard No. NY/T 1227-2019).