Thermal Lattice Boltzmann Simulation of Evaporating Thin Liquid Film for Vapor Generation
Source abstract
Abstract
Thin film evaporation (TFE) plays an important role in many industrial applications, such as power generation, cooling, and thermal management. Effective evaporation takes place in the thin liquid film region with relatively low film thickness and low intermolecular forces. In this paper, a numerical approach based on the thermal lattice Boltzmann method (TLBM) is employed to investigate the heat and mass transfer phenomena in TFE. The TLBM approach is validated by simulating some benchmark problems, and is then used to study a vapor generation problem where TFE is involved. Specifically, vapor is generated from evaporating pores, the solid walls of which are hydrophilic. Factors that affect the overall vapor generation efficiency are investigated via the numerical approach. Methods that can improve the overall efficiency are further proposed. Simulations reveal that distributed scenarios (using distributed small pores instead of a big one) and hydrophobic pore ends render more efficient vapor generation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lattice Boltzmann Simulation Studies · Fluid Dynamics and Thin Films · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Automation, School of IoT Engineering, Jiangnan University, Wuxi 214122, China
Department of Modern Mechanics, University of Science and Technology of China, Hefei 230000, China
Funding
Institute of Science and Technology of Jiangnan University
References (49)
Show source-provided references
1. An analytical solution for the total heat transfer in the thin-film region of an evaporating meniscus10.1016/j.ijheatmasstransfer.2008.06.011 ↗
2. Effects of superheat and temperature-dependent thermophysical properties on evaporating thin liquid films in microchannels10.1016/j.ijheatmasstransfer.2010.10.026 ↗
3. Numerical study of conjugated heat transfer in evaporating thin-films near the contact line10.1016/j.ijheatmasstransfer.2011.08.039 ↗
4. Analytical solutions of heat transfer and film thickness in thin-film evaporation10.1115/1.4007856 ↗
5. Microscale temperature measurement at an evaporating liquid meniscus10.1016/S0894-1777(02)00122-X ↗
6. Profile measurements of thin liquid films using reflectometry10.1063/1.4833855 ↗
7. Thin film evaporation of n-octane on silicon: Experiments and theory10.1016/j.ijheatmasstransfer.2014.03.063 ↗
8. Safaei, M., Mahian, O., Garoosi, F., Hooman, K., Karimipour, A., Kazi, S., and Gharehkhani, S. (2014). Investigation of micro-and nanosized particle erosion in a 90 pipe bend using a two-phase discrete phase model. Sci. World J., 2014.10.1155/2014/740578 ↗
9. Smoothed particle hydrodynamics method for fluid flows, towards industrial applications: Motivations, current state, and challenges10.1016/j.compfluid.2016.05.029 ↗
10. Molecular dynamics of fluid flow at solid surfaces10.1063/1.857376 ↗
11. Succi, S. (2001). The Lattice-Boltzmann Equation, Oxford University Press.
12. Goodarzi, M., Safaei, M., Karimipour, A., Hooman, K., Dahari, M., Kazi, S., and Sadeghinezhad, E. (2014). Comparison of the finite volume and lattice Boltzmann methods for solving natural convection heat transfer problems inside cavities and enclosures. Abstr. Appl. Anal., 2014.10.1155/2014/762184 ↗
13. Progress in particle-based multiscale and hybrid methods for flow applications10.1007/s10404-016-1729-y ↗
14. Investigation of the gravity effects on the mixed convection heat transfer in a microchannel using lattice Boltzmann method10.1016/j.ijthermalsci.2011.11.015 ↗
15. The effects of inclination angle and Prandtl number on the mixed convection in the inclined lid driven cavity using lattice Boltzmann method
16. Mixed convection of copper–water nanofluid in a shallow inclined lid driven cavity using the lattice Boltzmann method10.1016/j.physa.2014.01.057 ↗
17. Simulation of copper–water nanofluid in a microchannel in slip flow regime using the lattice Boltzmann method10.1016/j.euromechflu.2014.08.004 ↗
18. New correlation for Nusselt number of nanofluid with Ag/Al2O3/Cu nanoparticles in a microchannel considering slip velocity and temperature jump by using lattice Boltzmann method10.1016/j.ijthermalsci.2015.01.015 ↗
19. A three-dimensional lattice Boltzmann model for numerical investigation of bubble growth in pool boiling10.1016/j.icheatmasstransfer.2016.10.009 ↗
20. A novel approach to the analysis of squeezed-film air damping in microelectromechanical systems10.1088/0960-1317/27/1/015012 ↗
21. Huang, H., Sukop, M., and Lu, X. (2015). Multiphase Lattice Boltzmann Methods: Theory and Application, John Wiley & Sons.10.1002/9781118971451 ↗
22. Multiple-relaxation-time lattice Boltzmann approach to compressible flows with flexible specific-heat ratio and Prandtl number10.1209/0295-5075/90/54003 ↗
23. A novel thermal model for the lattice Boltzmann method in incompressible limit10.1006/jcph.1998.6057 ↗
24. Phase-field-based lattice Boltzmann finite-difference model for simulating thermocapillary flows10.1103/PhysRevE.87.013010 ↗
25. Lattice Boltzmann methods for multiphase flow and phase-change heat transfer10.1016/j.pecs.2015.10.001 ↗
26. Application to natural convection enclosed flows of a lattice Boltzmann BGK model coupled with a general purpose thermal boundary condition10.1016/j.ijthermalsci.2003.11.002 ↗
27. Simulation of high Rayleigh number natural convection in a square cavity using the lattice Boltzmann method10.1016/j.ijheatmasstransfer.2005.07.046 ↗
28. On the bubble departure diameter and release frequency based on numerical simulation results10.1016/j.ijheatmasstransfer.2008.09.003 ↗
29. Numerical simulation of the detachment of bubbles from a rough surface at microscale level10.1016/j.nucengdes.2012.03.040 ↗
30. Three-dimensional numerical investigation of film boiling by the lattice Boltzmann method10.1080/10407782.2016.1277936 ↗
31. Simulation of liquid thin film evaporation and boiling on a heated hydrophilic microstructured surface by Lattice Boltzmann method10.1016/j.ijheatmasstransfer.2015.03.029 ↗
32. Simulation of evaporation by an extension of the pseudopotential lattice Boltzmann method: A quantitative analysis10.1103/PhysRevE.83.046705 ↗
33. Lattice-Boltzmann method for complex flows10.1146/annurev-fluid-121108-145519 ↗
34. Numerical investigation of droplet motion and coalescence by an improved lattice Boltzmann model for phase transitions and multiphase flows10.1016/j.compfluid.2011.09.013 ↗
35. A critical review of the pseudopotential multiphase lattice Boltzmann model: Methods and applications10.1016/j.ijheatmasstransfer.2014.04.032 ↗
36. On equations of state in a lattice Boltzmann method10.1016/j.camwa.2009.02.024 ↗
37. On pressure and velocity boundary conditions for the lattice Boltzmann BGK model10.1063/1.869307 ↗
38. An extrapolation method for boundary conditions in lattice Boltzmann method10.1063/1.1471914 ↗
39. A non-slip boundary condition for lattice Boltzmann simulations10.1063/1.868766 ↗
40. D’Orazio, A., and Succi, S. (2003). Boundary conditions for thermal lattice Boltzmann simulations. Computational Science—ICCS 2003, Springer.10.1007/3-540-44860-8_101 ↗
41. Simulating two-dimensional thermal channel flows by means of a lattice Boltzmann method with new boundary conditions10.1016/j.future.2003.12.005 ↗
42. Simulation of conjugate heat transfer using the lattice Boltzmann method10.1080/10407782.2012.725009 ↗
43. Thermal boundary condition for the thermal lattice Boltzmann equation10.1103/PhysRevE.72.016703 ↗
44. Three-dimensional lattice Boltzmann simulations of high density ratio two-phase flows in porous media10.1016/j.camwa.2017.12.028 ↗
45. Effects of incompressibility on the elimination of parasitic currents in the lattice Boltzmann equation method for binary fluids10.1016/j.camwa.2009.02.017 ↗
46. Schrage, R. (1953). A Theoretic Study of Interface Mass Transfer, Columbia University Press.10.7312/schr90162 ↗
47. Carey, V.P. (2007). Liquid–Vapor Phase-Change Phenomena: An Introduction to the Thermophysics of Vaporization and Condensation Process in Heat Transfer Equipment, CRC Press. [2nd ed.].
48. Steam generation under one sun enabled by a floating structure with thermal concentration10.1038/nenergy.2016.126 ↗
49. Multifunctional Porous Graphene for High-Efficiency Steam Generation by Heat Localization10.1002/adma.201501832 ↗