journal article·2018-06-20Open access

Manufacturing of Non-Stick Molds from Pre-Painted Aluminum Sheets via Single Point Incremental Forming

Oscar Rodriguez-Alabanda, Miguel A. Narvaez, Guillermo Guerrero-Vaca, Pablo E. Romero

Applied Sciences· Volume 8· Issue 6

Abstract

The process of single point incremental formation (SPIF) awakens interest in the industry of mold manufacturing for the food industry. By means of SPIF, it is possible to generate short series of molds or mold prototypes at low cost. However, these industries require such molds to be functional (non-sticky) and to have an adequate geometry accuracy. This study presents a technique that enables direct manufacturing of molds from pre-coated sheets with non-stick resins. It has also studied the influence of two technological variables in the process (feed-rate and pitch) for different geometrical parameters of the mold. Low values of these variables result in a lower overall error in the profile obtained. However, in order to obtain greater detail in particular parameters (angles, depth), it is necessary to use higher values of feed-rate and pitch.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University of Cordoba, Medina Azahara Avenue 5, 14071 Cordoba, Spain

References (51)

Show source-provided references
1. Leszak, E. (1967). Apparatus and Processs for Incremental Dieless Forming. (3342051), U.S. Patent.
2. Incremental backward bulge forming of a sheet metal with a hemispherical head tool
3. Metal-flow phenomena in computerized numerically controlled incremental stretch-expanding of aluminum sheets10.2464/jilm.46.65 ↗
4. Asymmetric Single Point Incremental Forming of Sheet Metal10.1016/S0007-8506(07)60021-3 ↗
5. Integration of design rules and process modelling within SPIF technology—A review on the industrial dissemination of single point incremental forming10.1007/s00170-017-1130-3 ↗
6. Formability in single point incremental forming: A comparative analysis of the state of the art10.1016/j.cirpj.2016.07.003 ↗
7. Single point incremental forming of polymers10.1016/j.cirp.2009.03.095 ↗
8. Economical and Ecological Aspects of Single Point Incremental Forming Versus Deep Drawing Technology10.4028/www.scientific.net/KEM.344.931 ↗
9. A sustainability point of view on sheet metal forming operations: Material wasting and energy consumption in incremental forming and stamping processes10.1016/j.jclepro.2012.01.012 ↗
10. Research and Progress in Incremental Sheet Forming Processes10.1080/10426914.2010.544817 ↗
11. Single point incremental forming: An assessment of the progress and technology trends from 2005 to 201510.1016/j.jmapro.2017.03.014 ↗
12. Forming process of automotive body panel based on incremental forming technology
13. Strategies to improve the geometric accuracy in asymmetric single point incremental forming10.1007/s11740-009-0150-8 ↗
14. Incremental Forming Process for the Accomplishment of Automotive Details10.4028/www.scientific.net/KEM.344.559 ↗
15. Rapid prototyping for automotive industry via incremental sheet forming
16. Current status of “Dieless” Amino’s incremental forming10.1016/j.proeng.2014.09.128 ↗
17. Application of Incremental Forming process for high customised medical product manufacturing10.1016/j.jmatprotec.2005.02.148 ↗
18. Manufacture of custom-made cranial implants from DICOM® images using 3D printing, CAD/CAM technology and incremental sheet forming10.1590/rbeb.2014.024 ↗
19. Recent Approaches for the Manufacturing of Polymeric Cranial Prostheses by Incremental Sheet Forming10.1016/j.proeng.2017.04.059 ↗
20. Duflou, J.R., Lauwers, B., and Verbert, J. (2007). Study on the achievable accuracy in single point incremental forming. Advanced Methods in Material Forming, Springer.10.1007/3-540-69845-0_15 ↗
21. Afonso, D., Alves de Sousa, R., Torcato, R., Sousa, J.P., Santos, R., and Valente, R. (2017, January 3–5). Case studies on industrial applicability of single point incremental forming. Proceedings of the Ciência 2017—Encontro com Ciência e Tecnologia en Portugal, Lisbon, Portugal.
22. Kalo, A. (2018, April 04). N-Bowls. Available online: www.ammarkalo.com.
23. Preliminary studies on single point incremental forming for composite materials10.1007/s12289-010-0926-6 ↗
24. Appermont, R., Van Mieghem, B., Van Bael, A., Bens, J., Ivens, J., Vanhove, H., Behera, A.K., and Duflou, J. (2008). Sheet-metal based molds for low-pressure processing of thermoplastics. PMI, 383–388.
25. Testing single point incremental forming molds for thermoforming operations10.1063/1.4963452 ↗
26. Direct rapid tooling for polymer processing using sheet metal tools10.1016/j.promfg.2017.09.016 ↗
27. Towards super-nonstick aluminized steel surfaces10.1016/j.porgcoat.2017.04.029 ↗
28. Incremental forming of colour-coated sheets10.1007/s12289-008-0190-1 ↗
29. Skjoedt, M., Silva, M.B., Bay, N., and Martins, P.A.F. (2007, January 20–21). Single point incremental forming using a dummy sheet. Proceedings of the 2nd International Conference on New Forming Technologies, Bremen, Germany.
30. Single point incremental forming of tailored blanks produced by friction stir welding10.1016/j.jmatprotec.2008.02.057 ↗
31. Guerrero-Vacas, G. (2013). Comparative Analysis of the Removal Processes of Fluoropolymer Anti-Adherent Coatings on Metallic Surfaces between Laser and Pyrolytic Technologies, University of Malaga.
32. Verbert, J. (2010). Computer Aided Process Planning for Rapid Prototyping with Incremental Sheet Forming Techniques, Katholieke Universiteit Leuven.
33. Behera, A.K. (2013). Shape Feature Taxonomy Development for Toolpath Optimization in Incremental Sheet Forming, Katholieke Universiteit Leuven.
34. Observations on Heat Generated in Single Point Incremental Forming10.1016/j.proeng.2017.04.060 ↗
35. Influence of some relevant process parameters on the dimensional accuracy in incremental forming: A numerical and experimental investigation10.1016/j.jmatprotec.2004.04.139 ↗
36. An analytical model for improving precision in single point incremental forming10.1016/j.jmatprotec.2007.03.079 ↗
37. Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations10.1016/j.ijsolstr.2012.07.016 ↗
38. Skjoedt, M. (2008). Rapid Prototyping by Single Point Incremental Forming of Sheet Metal. [Ph.D. Thesis, Technical University of Denmark].
39. The mechanics of incremental sheet forming10.1016/j.jmatprotec.2008.03.025 ↗
40. Single point incremental forming of PVC10.1016/j.jmatprotec.2008.02.013 ↗
41. Single point incremental forming of PVC: Experimental findings and theoretical interpretation10.1016/j.euromechsol.2010.03.008 ↗
42. Study on Process Parameters on Single Point Incremental Forming of PVC10.4028/www.scientific.net/MSF.878.74 ↗
43. Temperature influence on Single Point Incremental Forming of PVC parts10.1016/j.promfg.2017.09.085 ↗
44. Analysis of energy efficiency of different setups able to perform single point incremental forming (SPIF) processes10.1016/j.procir.2014.06.055 ↗
45. Advances in force modelling for SPIF10.1007/s12289-009-0536-3 ↗
46. Lubrication aspects during Single Point Incremental Forming for steel and aluminum materials10.1007/s12541-015-0079-0 ↗
47. Forming parameters for incremental forming of aluminium alloy sheet metal10.1243/095440502320405458 ↗
48. Forming parameters and forming defects in incremental forming of an aluminum sheet: Correlation, empirical modeling, and optimization: Part A10.1080/10426914.2011.552017 ↗
49. Dominant deformation mechanisms in single point incremental forming (SPIF) and their effect on geometrical accuracy10.1016/j.ijmecsci.2017.12.053 ↗
50. Processing metal sheets by SPIF and analysis of parts quality10.1080/10426914.2012.746702 ↗
51. Experimental investigation of mechanical properties, formability and force measurement for AA7075-O aluminum alloy sheets formed by incremental forming10.1007/s12541-013-0255-z ↗