journal article·2020-07-31Open access

Off-Design Operation of Conventional and Phase-Change CO2 Capture Solvents and Mixtures: A Systematic Assessment Approach

Theodoros Zarogiannis, Athanasios I. Papadopoulos, Panos Seferlis

Applied Sciences· Volume 10· Issue 15

Abstract

Solvent-based CO2 capture technologies hold promise for future implementation but conventional solvents incur significant energy penalties and capture costs. Phase-change solvents enable a significant reduction in the regeneration energy but their performance has only been investigated under steady-state operation. In the current work, we employed a systematic approach for the evaluation of conventional solvents and mixtures, as well as phase-change solvents under the influence of disturbances. Sensitivity analysis was used to identify the impact that operating parameter variations and different solvents exert on multiple CO2 capture performance indicators within a wide operating range. The resulting capture process performance was then assessed for each solvent within a multi-criteria approach, which simultaneously accounted for off-design conditions and nominal operation. The considered performance criteria included the regeneration energy, solvent mass flow rate, cost and cyclic capacity, net energy penalty from integration with an upstream power plant, and lost revenue from parasitic losses. The 10 investigated solvents included the phase-change solvents methyl-cyclohexylamine (MCA) and 2-(diethylamino)ethanol/3-(methylamino)propylamine (DEEA/MAPA). We found that the conventional mixture diethanolamine/methyldiethanolamine (DEA/MDEA) and the phase-change solvent DEEA/MAPA exhibited both resilience to disturbances and desirable nominal operation for multiple performance indicators simultaneously.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Carbon Dioxide Capture Technologies · Phase Equilibria and Thermodynamics · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chemical Process and Energy Resources Institute, Centre for Research and Technology-Hellas, 57001 Thermi, Thessaloniki, Greece

Department of Mechanical Engineering, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece

Funding

Horizon 2020

References (48)

Show source-provided references
1. Carbon capture and storage (CCS): The way forward10.1039/C7EE02342A ↗
2. Nikolaeva, D., Loïs, S., Dahl, P.I., Sandru, M., Jaschik, J., Tanczyk, M., Fuoco, A., Jansen, J.C., and Vankelecom, I.F.J. (2020). Water Vapour promotes CO2 transport in poly(ionic liquid)/ionic liquid-based thin-film composite membranes containing zinc salt for flue gas treatment. Appl. Sci., 10.10.3390/app10113859 ↗
3. Manyà, J.J., García-Morcate, D., and González, B. (2020). Adsorption performance of physically activated biochars for postcombustion CO2 capture from dry and humid flue gas. Appl. Sci., 10.10.3390/app10010376 ↗
4. Staciwa, P., Narkiewicz, U., Sibera, D., Moszyński, D., Wróbel, R.J., and Cormia, R.D. (2019). Carbon Spheres as CO2 Sorbents. Appl. Sci., 9.10.3390/app9163349 ↗
5. Deng, X., Yang, W., Li, S., Liang, H., Shi, Z., and Qiao, Z. (2020). Large-scale screening and machine learning to predict the computation-ready, experimental metal-organic frameworks for CO2 capture from air. Appl. Sci., 10.10.3390/app10020569 ↗
6. Papadopoulos, A.I., and Seferlis, P. (2017). Process Systems and Materials for CO2 Capture: Modelling, Design, Control and Integration, John Wiley & Sons.10.1002/9781119106418 ↗
7. Start-up of world’s first commercial post-combustion coal fired ccs project: Contribution of shell cansolv to saskpower boundary dam iccs project10.1016/j.egypro.2014.11.642 ↗
8. Armpriester, A. (2017). WA Parish Post Combustion CO2 Capture and Sequestration Project Final Public Design Report, Petra Nova Parish Holdings.
9. Process flowsheet design optimization for various amine-based solvents in post-combustion CO2 capture plants10.1016/j.jclepro.2015.04.129 ↗
10. Green chemistry: Reversible nonpolar-to-polar solvent10.1038/4361102a ↗
11. Zhang, J. (2013). Study on CO2 Capture Using Thermomorphic Biphasic Solvents with Energy-Efficient Regeneration. [Ph.D. Thesis, TU-Dortmund University].
12. CO2 post combustion capture with a phase change solvent. Pilot plant campaign10.1016/j.ijggc.2014.10.007 ↗
13. Zarogiannis, T., Papadopoulos, A.I., and Seferlis, P. (2020). Efficient Selection of Conventional and Phase-Change CO2 Capture Solvents and Mixtures Based on Process Economic and Operating Criteria. J. Clean. Prod., 122764.10.1016/j.jclepro.2020.122764 ↗
14. Novel shortcut estimation method for regeneration energy of amine solvents in an absorption-based carbon capture process10.1021/es504684x ↗
15. Dynamic modeling and absorption capacity assessment of CO2 capture process10.1016/j.ijggc.2012.01.016 ↗
16. Dynamic modelling of the absorber of a post-combustion CO2 capture plant: Modelling and simulations10.1016/j.compchemeng.2013.03.002 ↗
17. Dynamic modelling and analysis of an amine-based post-combustion CO2 capture absorption column10.1016/j.ijggc.2012.10.013 ↗
18. Dynamic modelling of CO2 absorption for post combustion capture in coal-fired power plants10.1016/j.fuel.2008.11.009 ↗
19. Dynamic modelling, validation and analysis of post-combustion chemical absorption CO2 capture plant10.1016/j.ijggc.2012.05.001 ↗
20. Dynamic modeling of CO2 absorption from coal-fired power plants into an aqueous monoethanolamine solution10.1016/j.cherd.2012.09.016 ↗
21. Dynamic model validation of the post-combustion CO2 absorption process10.1016/j.ijggc.2015.07.003 ↗
22. Dynamic modeling and validation of amine-based CO2 capture plant10.1016/j.applthermaleng.2013.12.045 ↗
23. Plantwide Control of CO2 Capture by Absorption and Stripping Using Monoethanolamine Solution10.1021/ie100771x ↗
24. Control strategies for flexible operation of power plant with CO2 capture plant10.1002/aic.12789 ↗
25. Dynamic modelling and control of MEA absorption processes for CO2 capture from power plants10.1016/j.fuel.2013.08.031 ↗
26. Dynamic modelling, identification and preliminary control analysis of an amine-based post-combustion CO2 capture pilot plant10.1016/j.jclepro.2015.11.054 ↗
27. Controllability and flexibility analysis of CO2 post-combustion capture using piperazine and MEA10.1016/j.ijggc.2016.06.003 ↗
28. Solvent effects on design with operability considerations in post-combustion CO2 capture plants10.1016/j.cherd.2018.01.017 ↗
29. Economically efficient operation of CO2 capturing process. Part II. Design of control layer10.1016/j.cep.2011.11.004 ↗
30. Dynamic Simulation and Control of Post-combustion CO2 Capture with MEA in a Gas Fired Power Plant10.1016/B978-0-444-63456-6.50104-6 ↗
31. Dynamic modelling and control of a pilot plant for post-combustion CO2 capture
32. Demonstrating full-scale post-combustion CO2 capture for coal-fired power plants through dynamic modelling and simulation10.1016/j.fuel.2010.10.056 ↗
33. Controllability and optimal scheduling of a CO2 capture plant using model predictive control10.1016/j.ijggc.2014.08.017 ↗
34. Economically efficient operation of CO2 capturing process part I: Self-optimizing procedure for selecting the best controlled variables10.1016/j.cep.2011.02.005 ↗
35. Flexible operation of solvent regeneration systems for CO2 capture processes using advanced control techniques: Towards operational cost minimisation10.1016/j.ijggc.2012.09.004 ↗
36. Liang, X., Li, Y., Wu, X., Shen, J., and Lee, K.Y. (2018). Nonlinearity analysis and multi-model modeling of an MEA-based post-combustion CO2 capture process for advanced control design. Appl. Sci., 8.10.3390/app8071053 ↗
37. A Framework for Solvent Selection Based on Optimal Separation Process Design and Controllability Properties10.1016/S1570-7946(09)70030-6 ↗
38. A framework for the integration of solvent and process design with controllability assessment10.1016/j.ces.2016.04.042 ↗
39. Process design and control structure evaluation and screening using nonlinear sensitivity analysis
40. Oyenekan, B.A. (2007). Modeling of Strippers for CO2 Capture by Aqueous Amines. [Ph.D. Thesis, University of Texas at Austin].
41. Oexman, J. (2011). Post Combustion CO2 Capture: Energetic Evaluation of Chemical Absorption Processes in Coal—Fired Steam Power Plants. [Ph.D. Thesis, Technischen Universität Hamburg].
42. (2020, May 09). PSE gSAFT. Available online: www.psenterprise.com/products/gsaft.
43. Group contribution methodology based on the statistical associating fluid theory for heteronuclear molecules formed from Mie segments10.1063/1.4851455 ↗
44. The A in SAFT: Developing the contribution of association to the Helmholtz free energy within a Wertheim TPT1 treatment of generic Mie fluids10.1080/00268976.2015.1029027 ↗
45. Statistical associating fluid theory for chain molecules with attractive potentials of variable range10.1063/1.473101 ↗
46. Arshad, M.W. (June 2014). Measuring and Thermodynamic Modeling of De-Mixing CO2 Capture Systems. [Ph.D. Thesis, Technical University of Denmark].
47. Tzirakis, F., Tsivintzelis, I., Papadopoulos, A.I., and Seferlis, P. (2019, January 26–28). Experimental measurement of Vapour-liquid-liquid equilibria of phase-change solvents. Proceedings of the 26th Thermodynamics Conference, Punta Umbría, Spain.
48. Absorption characteristics of carbon dioxide into an O/W emulsion absorbent containing N-methylcyclohexylamine/2,6 dimethylpiperidine10.1016/j.jtice.2014.08.008 ↗