journal article·2020-08-19Open access

Towards the Use of Novel Materials in Shipbuilding: Assessing Thermal Performances of Fire-Doors by Self-Consistent Numerical Modelling

Giada Kyaw Oo D’Amore, Francesco Mauro, Alberto Marinò, Marco Caniato, Jan Kašpar

Applied Sciences· Volume 10· Issue 17

Abstract

Nowadays, fire-doors optimization is approached by using consolidated design guidelines and traditional materials, such as rock wool. Then, selected solution is directly tested in a mandatory fire-test. Unfortunately, few pieces of information could be retrieved either if the test succeeds or fails, which makes both improvements in the design and use of innovative materials difficult. Thus, in this work, a self-consistent finite element method (FEM) analysis is developed and assessed against experimental fire-test results, highlighting the critical parameters affecting the numerical simulations. Using this tool, a new fiberglass-containing foam, with improved acoustic and mechanical properties, as compared to the rock-wool, is studied as a potential insulating material for on-board fire-doors. The assessment of the performance of the new material demonstrates that, contrary to common believe, the effective thermal insulation capacity is not necessarily the critical factor in determining the fire-resistance of a fire-door. Using the validated FEM analysis, it has been proven that the reduction of the thermal bridges originated at the door edges allows, firstly, for the attainment of a fire-door 37% thinner and 61% lighter with respect to a traditional one, and, secondly, the use of new material as insulator in fire-doors that, even if less thermally capable, could improve other properties of the door, as an example its soundproofing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Masonry and Concrete Structural Analysis · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Engineering and Architecture, University of Trieste, I-34127 Trieste, Italy

Maritime Safety Research Centre, Department of Naval Architecture, Ocean and Marine Engineering, University of Strathclyde, Glasgow G4OLZ, UK

Faculty of Science and Technology, Free University of Bozen, I-39100 Bozen, Italy

Department of Chemical and Pharmaceutical Sciences, University of Trieste; I-34127 Trieste, Italy

References (38)

Show source-provided references
1. (2010). International Code for Application of Fire Test Procedures (FTP Code), International Maritime Organization (IMO). Annex 1, Part 3.
2. Innovative design of fire doors: Computational modeling and experimental validation10.1007/s10694-017-0658-y ↗
3. A review of unconventional sustainable building insulation materials
4. State of the art in thermal insulation materials and aims for future developments10.1016/j.enbuild.2004.05.006 ↗
5. Regulatory risk assessment approaches for synthetic mineral fibres10.1016/j.yrtph.2015.07.029 ↗
6. Acoustic energy absorption properties of fibrous materials: A review10.1016/j.compositesa.2017.07.002 ↗
7. Experimental study of the absorption characteristics of some porous fibrous materials10.1016/S0003-682X(00)00043-8 ↗
8. Caniato, M., Kyaw Oo D’Amore, G., Kaspar, J., and Gasparella, A. (2020). Sound absorption performance of sustainable foam materials: Application of analytical and numerical tools for the optimization of forecasting models. Appl. Acoust., 161.10.1016/j.apacoust.2019.107166 ↗
9. Thermo-mechanical analysis of a fire door for naval applications10.1177/0734904114564955 ↗
10. Thermo-mechanical analysis of fire doors subjected to a fire endurance test10.1177/1042391508098899 ↗
11. Assessment of physical phenomena associated to fire doors during standard tests10.1007/s10694-012-0270-0 ↗
12. No more excuses for non-reproducible methods10.1038/d41586-018-06008-w ↗
13. Measured and calculated temperature evolution on the room side of a butted steel door frame subjected to the standard fire of ISO 83410.1016/j.firesaf.2009.02.003 ↗
14. D’Amore, G.K.O., Marinò, A., and Kašpar, J. (2020). Numerical modeling of fire resistance test as a tool to design lightweight marine fire doors: A preliminary study. J. Marine Sci. Eng., 8.10.3390/jmse8070520 ↗
15. (2005). Eurocode 3: Design of Steel Structures—Part 1–2: General rules—Structural Fire Design, European Committee for Standardization.
16. Caniato, M., and Travan, A. (2019). Method for Recycling Waste Material. (EP 3216825 B1), European Patent.
17. ASTM (2000). D1621: Standard Test Method for Compressive Properties of Rigid Cellular Plastics, ASTM International.
18. ASTM (2017). C518: Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus, ASTM International.
19. Incropera, F.P., DeWitt, D.P., Bergman, T.L., and Lavine, A.S. (2007). Fundamentals of Heat and Mass Transfer, John Wiley & Sons. [6th ed.].
20. (2007). ISO 10456: Building Materials and Products, Hygrothermal Properties, Tabulated Design Values and Procedures for Determining Declared and Design Hermal Values, International Organization for Standardization.
21. (2010). ISO 1182: Reaction to Fire Tests for Products—Non-Combustibility Test, International Organization for Standardization.
22. (2017). Test Report No. 2016CS011021/14, Registro Navale Italiano (RINA).
23. Green, D.W., and Perry, R.H. (2008). Section 5: Heat and mass transfer. Perry’s Chemical Engineers’ Handbook, McGraw-Hill Professional.
24. (2019, September 10). Dry Air Properties. Available online: https://www.engineeringtoolbox.com/dry-air-properties-d_973.html.
25. (2002). Eurocode 1: Actions on Structures—Part 1–2: General Actions—Actions on Structures Exposed to Fire, European Committee for Standardization.
26. Bergman, T.L., Incropera, F.P., Dewitt, D.P., and Lavine, A.S. (2011). Fundamentals of Heat and Mass Transfer, John Wiley & Sons. [7th ed.].
27. Application of grid convergence index in FE computation
28. Mauro, F., Cerni, P., and Nabergoj, R. (2017, January 15–18). Rans calculations on submerged bodies. Proceedings of the 23rd International Conference Engineering Mechanics, Svratka, Czech Republic.
29. The Approximate Arithmetical Solution by Finite Differences of Physical Problems Involving Differential Equations, with an Application to the Stresses in a Masonry Dam
30. Roache, P.J. (1998). Verification and Validation in Computational Science and Engineering, Hermosa Pub.
31. Convection and radiation in layers of low-density fibrous insulants10.1016/0306-2619(84)90051-5 ↗
32. Experimental investigation of the effect of natural convection on heat transfer in mineral wool10.1177/0075424202026002930 ↗
33. Heating rate effect on the thermophysical properties of steel in fire10.1016/j.jcsr.2016.09.016 ↗
34. Determination of steel emissivity for the temperature prediction of structural steel members in fire10.1061/(ASCE)MT.1943-5533.0000607 ↗
35. (2014). MSC 91/22/Add.1 Adoption of the Code on Noise Levels on Board Ships, International Maritime Organization (IMO).
36. Analysis of noise on board a ship during navigation and manoeuvres10.1016/j.oceaneng.2015.06.040 ↗
37. Acoustic comfort on board ships: An evaluation based on a questionnaire10.1016/j.apacoust.2005.01.001 ↗
38. Optimising open porous foam for acoustical and vibrational performance10.1016/j.jsv.2009.10.009 ↗