journal article·2021-01-13Open access

Structural Behavior of Floor Systems Made by Floor Plates—Mechanical Model Based on Test Results

Tom Molkens, Ann Van Gysel

Applied Sciences· Volume 11· Issue 2

Abstract

In daily engineering practice, the execution of concrete slabs by the mean of precast floor plates is seen as a common and reliable way to create massive slabs. In the last few decades, however, there has been an evolution to flat slabs and other uses where important bending moments must be transferred over the joints between the floor plates. For this kind of application, there is a lack of knowledge and experimental evidence based on large-scale tests to define accurate failure and design models. In this work, a comprehensive overview is given of 20 large-scale tests and some additional tests to support the findings and observations. It is confirmed that a purely bending-based design of the joints delivers reliable results, but some conditions are set; first, the maximum distance of the lattice girder to the joint may not exceed 400 mm without voiding elements. Second, only a 95 mm distance must be respected with voiding elements or additional protruding reinforcement must be applied. Attention is also given to how the system works when the major components—adhesion, mechanical interlock, and friction—are missing at the interface. Finally, repair possibilities are discussed and how they should be designed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Materials and Constructions Division, Campus De Nayer, KU Leuven, B-2860 Sint-Katelijne-Waver, Belgium

References (33)

Show source-provided references
1. (2005). Precast Concrete Products—Floor Plates for Floor Systems, CEN.
2. (2011). Precast Concrete Products—Hollow Core Slabs, CEN.
3. (2012). Precast Products—Bridge Products, CEN.
4. (2005). Design of Concrete Structures—Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization. EN 1992-1-1.
5. Schnell, A.J., and Busch, D. (2016, January 21–23). New void formers for biaxial voided slabs. Proceedings of the 14th fib Symposium, Cape Town, South Africa.
6. Gudmand-Høyer, T. (2003). Note on the Moment Capacity in a Bubble Deck Joint. [Ph.D. Thesis, Technical University of Denmark].
7. Lundgren, K., Helgesson, J., and Sylvén, R. (2005). Joints in Lattice Girder Structures, Chalmers University of Technology.
8. Furche, J., and Bauermeister, U. (2016). Betonkalender 2016—Sonderdruck: Elementbauweise mit Gitterträgern nach Eurocode 2, Ernst & Sohn.10.1002/9783433603413.ch4 ↗
9. Two-way flexural behaviour of donut-type voided slabs10.1186/s40069-018-0247-6 ↗
10. Flexural behaviour of reinforced concrete biaxial voided square slabs
11. Durchstanzbewehrung für elementdecken nach eurocode 2
12. Punching behavior of BubbleDeck type reinforced concrete slabs10.1002/suco.201900176 ↗
13. Experimental and analytical study on punching shear strangth of BubbleDecks
14. Braam, C., Ensink, L., Meester, J., de Vos, W., and Wijte, S. (2017). Bezwijken Parkeergarage Eindhoven Airport, Adviesbureau Ir. J.G. Hageman B.V.
15. Borsje, H., and Dieteren, G. (2017). Onderzoek naar de Technsiche Oorzaak van de Gedeeltelijke Instorting van de in Aabouw Zijnde Parkeergarage P1 Eindhoven Airport, TNO Technical Services.
16. (2002). Draagvloeren in Niet-Industriële Gebouwen, WTCB.
17. (2019). Geprefabriceerde Betonproducten—Breedplaten voor Vloersystemen—Nationale Aanvulling bij, NBN.
18. Ermüdung van elementdecken mit gitterträgern, wöhlerlinien für gitterträger10.1002/best.201700047 ↗
19. A practical approach for estimating the floor deformability i existing RC buildings: Evaluation of the effects in the structural response and seismic fragility10.1007/s10518-019-00774-2 ↗
20. Comparitive experimental study of fire resistance of two-way restrained and unrestrained precast concrete composite slabs10.1016/j.firesaf.2020.103225 ↗
21. Geerts, R., and Vanhoutte, S. (2020). Voegweerstand bij Breedplaatvloeren, KU Leuven FIIW.
22. Van Gysel, A. (2019). Vierpuntsbuigproeven op Breedplaatvloeren Met Langse Voeg, KU Leuven Materials and Constructions Division De Nayer.
23. (2020). Betonstaal-Tralieliggers, OCBS.
24. Van Hout, S., and van Loo, L. (2019). Uittrekweerstand van Tralieliggers, KU Leuven Faculty of Engineering Technology De Nayer.
25. Van Gysel, A., and Molkens, T. (2019). Uittrekproeven op Tralieliggers, KU Leuven Materials and Structures Division De Nayer.
26. De Swert, D., and Geniets, M. (2018). Praktisch Onderzoek naar de Voegweerstand bij Breedplaatvloeren Voorzien van Vulelementen, KU Leuven Faculty of Engineering Technology De Nayer.
27. Sanders, J., and Geens, L. (2019). Buigweerstand van Niet-Langse Voegen in Breedplaatvloeren Met Vulelementen, KU Leuven Faculty of Engineering Technology De Nayer.
28. Molkens, T., and van Gysel, A. (2019, January 27–29). Behaviour of joints in lattice plank profiles with voiding elements. Proceedings of the fib Symposium, Krakau, Poland.
29. (2004). Eurocode 8: Design of Structures for Earthquake Resistance—Part 1: General Rules, Seismic Actions and Rules for Buildings, CEN.
30. Faber, M., and Vrouwenvelder, T. (2001). Probabilistic Model Code. JCSS, Available online: https://www.jcss-lc.org/jcss-probabilistic-modelcode/.
31. (2016). Fib Bulletin 80 Partial Factor Methods for Existing Structures, Fédération Internationale bu Béton.
32. (2002). Eurocode 0—Basis of Structural Design, CEN.
33. (2012). Modelcode 2010, Fédération Internationale bu Béton.