journal article·2021-01-20Open access

Digital Workflow for 3D Design and Additive Manufacturing of a New Miniscrew-Supported Appliance for Orthodontic Tooth Movement

Daniele Cantarella, Vincenzo Quinzi, Lorena Karanxha, Paolo Zanata, Gianpaolo Savio, Massimo Del Fabbro

Applied Sciences· Volume 11· Issue 3

Abstract

The introduction of digital workflows and their combination with miniscrew assisted appliances has opened new and enthusiastic perspectives in modern orthodontics. However, in all digital workflows currently in use for orthodontic tooth movement, the miniscrews are inserted first in the maxillary bone, often by means of a surgical guide, and then the appliance is fabricated and secured over the miniscrews with different fixation mechanisms. By doing so, some adaptation problems can be encountered while securing the appliance over the miniscrews, and the chairside time required can therefore be significant. In the present study, we introduce a digital workflow for the design and fabrication of a new appliance, customized on the individual morphology of maxillary bone by using patient Cone Beam Computed Tomography CBCT, for sagittal and vertical orthodontic tooth movement (DIVA, divergent anchors). Differently from the existing protocols, the appliance is cemented first intraorally, serving as a surgical guide for the subsequent insertion of miniscrews. In this way, the adaptation problems are avoided and the chair-side time is reduced.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Orthodontics and Dentofacial Orthopedics · Anatomy and Medical Technology · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomedical, Surgical and Dental Sciences, University of Milan, Via Commenda 10, 20122 Milan, Italy

Department of Life, Health & Environmental Sciences, Postgraduate School of Orthodontics, University of L’Aquila, 67100 L’Aquila, Italy

Lab Technician, Private Practice, Viale delle Querce 3A, 31033 Castelfranco Veneto, Italy

Department of Civil, Environmental and Architectural Engineering ICEA, University of Padova, Via Venezia 2, 35100 Padova, Italy

Dental Clinic, IRCCS Orthopedic Institute Galeazzi, Via Riccardo Galeazzi 4, 20161 Milan, Italy

References (30)

Show source-provided references
1. Centennial inventory: The changing face of orthodontics10.1016/j.ajodo.2015.08.011 ↗
2. Systematic review of the experimental use of temporary skeletal anchorage devices in orthodontics10.1016/j.ajodo.2006.05.033 ↗
3. CAD/CAM Metallic Printing of a Skeletally Anchored Upper Molar Distalizer
4. A Three-Dimensional Digital Insertion Guide for Palatal Miniscrew Placement
5. The Easy Driver for Placement of palatal mini-implants and a maxillary expander in a single appointment
6. Clinical guidelines to integrate temporary anchorage devices for bone-borne orthodontic appliances in the digital workflow10.25259/APOS_78_2019 ↗
7. Direct Printed Metal Devices—The Next Level of Computer-aided Design and Computer-aided Manufacturing Applications in the Orthodontic Care10.4103/apos.apos_115_17 ↗
8. Digital versus conventional impressions for fixed prosthodontics: A systematic review and meta-analysis10.1016/j.prosdent.2015.12.017 ↗
9. Up in the Air: Orthodontic technology unplugged!10.4103/2321-1407.199178 ↗
10. Full arch digital scanning systems performances for implant-supported fixed dental prostheses: A comparative study of 8 intraoral scanners10.1016/j.jpor.2019.04.002 ↗
11. Effects of monocortical and bicortical mini-implant anchorage on bone-borne palatal expansion using finite element analysis10.1016/j.ajodo.2016.10.025 ↗
12. The distal jet for upper molar distalization
13. A miniscrew system with interchangeable abutments
14. Generation of 3D digital models of the dental arches using optical scanning techniques10.1053/j.sodo.2018.10.006 ↗
15. Present and the future of digital orthodontics10.1053/j.sodo.2018.10.002 ↗
16. Computer-aided design and manufacture of hyrax devices: Can we really go digital?10.1016/j.ajodo.2017.06.016 ↗
17. Miniscrew-assisted rapid palatal expansion: A review of recent reports
18. Microimplant-assisted rapid palatal expansion appliance to orthopedically correct transverse maxillary deficiency in an adult10.1016/j.ajodo.2015.04.043 ↗
19. Innovative Verankerungsalternativen zur Molarendistalisation im Oberkiefer—Eine Übersicht10.1007/s00056-005-0512-6 ↗
20. Unilateral Distal Molar Movement with an Implant-Supported Distal Jet Appliance
21. A miniplate system for improved stability of skeletal anchorage
22. Correction of upper-arch asymmetries using the Mesial-Distalslider
23. Efficient Distalization of Maxillary Molars with Temporary Anchorage Devices for the Treatment of Class II Malocclusion10.5152/TurkJOrthod.2020.20064 ↗
24. Treatment effects of a modified palatal anchorage plate for distalization evaluated with cone-beam computed tomography10.1016/j.ajodo.2014.03.023 ↗
25. A new methodology for the digital planning of micro-implant-supported maxillary skeletal expansion10.2147/MDER.S247751 ↗
26. Silicone 3D Printing: Process Optimization, Product Biocompatibility, and Reliability of Silicone Meniscus Implants10.1089/3dp.2018.0226 ↗
27. A Review of 3D Printing Technology for Medical Applications10.1016/j.eng.2018.07.021 ↗
28. Geometric modeling of cellular materials for additive manufacturing in biomedical field: A review10.1155/2018/1654782 ↗
29. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts10.1108/13552540710776142 ↗
30. Influence of ceramic firing on marginal gap accuracy and metal-ceramic bond strength of 3D-printed Co-Cr frameworks10.1016/j.prosdent.2019.08.001 ↗