Determination of the Crack Propagation Direction in Mixed-Mode Missions due to Cyclic Loading
Source abstract
Abstract
The evaluation of cyclic crack propagation due to missions with varying mixed-mode conditions is an important topic in industrial applications. This paper focuses on the determination of the resulting propagation direction. Two criteria are analyzed, the dominant step criterion and the averaged angle criterion, and compared with experimental data from tension-torsion tests with and without phase shift. The comparison shows that the dominant step criterion yields better results for small to moderate values of the phase shift. For a large phase shift of 90°, the experimental results are not very consistent, and therefore, no decisive conclusions can be drawn.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Structural Load-Bearing Analysis · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
MTU Aero Engines AG, Dachauer Str. 665, 80995 Munich, Germany
Institute of Structural Mechanics, University of Rostock, Albert-Einstein Str. 2, 18059 Rostock, Germany
Funding
Deutsche Forschungsgemeinschaft
References (52)
Show source-provided references
1. Federal Aviation Administration (FAA) (2001). AC 33.14-1—Damage Tolerance for High Energy Turbine Engines Rotors—Including Change 1.
2. Combined static-cyclic multi-axial crack propagation in cruciform specimens10.1016/j.ijfatigue.2019.02.029 ↗
3. Theoretical crack path prediction10.1111/j.1460-2695.2004.00855.x ↗
4. Application of the Finite Element Method to mixed-mode cyclic crack propagation calculations in specimens10.1016/j.ijfatigue.2013.05.001 ↗
5. Simple rainflow counting algorithms10.1016/0142-1123(82)90018-4 ↗
6. On the crack extension in plates under plane loading and transverse shear10.1115/1.3656897 ↗
7. On the failure of cracks under mixed-mode loads10.1023/A:1007499309587 ↗
8. Mixed-Mode I/II fracture behavior of an aluminium alloy10.1016/0022-5096(94)90001-9 ↗
9. Cracks on Mixed Mode loading—Theories, experiments, simulations10.1016/j.ijfatigue.2013.06.019 ↗
10. A new criterion for the prediction of crack development in multiaxially loaded structures
11. A New Three-Dimensional Fracture Criterion10.4028/www.scientific.net/KEM.251-252.209 ↗
12. Dual boundary element method and finite element method for mixed-mode crack propagation simulations in a cracked hollow shaft10.1111/ffe.12655 ↗
13. Fatigue crack growth under mixed modes I and II10.1111/j.1460-2695.1985.tb00430.x ↗
14. The formation and propagation of Mode I branch cracks in mixed mode fatigue failure10.1016/S0013-7944(96)00053-7 ↗
15. Sustained Mode I and Mode II fatigue crack growth in flat plates10.1016/S0013-7944(96)00078-1 ↗
16. Effect of steady torsion on fatigue crack initiation and propagation under rotating bending10.1016/j.engfracmech.2009.12.012 ↗
17. The effect of steady torsion on fatigue crack growth in shafts10.1016/j.ijfatigue.2005.06.051 ↗
18. Fatigue crack growth under rotating bending loading on aluminium alloy 7075-T6 and the effect of a steady torsion10.1016/j.tafmec.2015.05.006 ↗
19. Propagation of fatigue cracks under polymodal loading10.1111/j.1460-2695.1982.tb01237.x ↗
20. A new testing method to obtain Mode II fatigue crack growth characteristics of hard materials10.1111/j.1460-2695.2004.00747.x ↗
21. Mechanisms and fatigue performance of two steels in cyclic torsion with axial static torsion/compression10.1111/j.1460-2695.1997.tb00286.x ↗
22. Fatigue crack propagation under non-proportional mixed mode loading10.1016/S0013-7944(98)00097-6 ↗
23. Finite element analysis of fatigue crack growth with interspersed Mode I and mixed mode overloads10.1016/j.ijfatigue.2004.10.008 ↗
24. Experimental and numerical investigations on the influence of the loading direction on the fatigue crack growth10.1016/j.ijfatigue.2005.05.012 ↗
25. Crack front segmentation under combined Mode I- and Mode III loading
26. Fatigue crack growth in AlCu4Mg1 under nonproportional bending-with-torsion loading
27. (2001). Sonsino Influence of load and deformation-controlled multiaxial tests on fatigue life to crack initiation. Int. J. Fatigue, 23, 159–167.10.1016/S0142-1123(00)00079-7 ↗
28. Fatigue crack growth behavior of fine-grained steel S460N under proportional and non-proportional loading10.1016/j.engfracmech.2010.02.008 ↗
29. Highsmith, S. (2009). Crack Path Determination for Non-Proportional Mixed-Mode Fatigue. [Ph.D. Thesis, Georgia Institute of Tecnology, George W. Woodruff School of Mechanical Engineering].
30. Brüning, J. (2008). Untersuchungen zum Rissfortschrittsverhalten unter Nichtproportionaler Belastung bei Elastisch-Plastischem Materialverhalten—Experimente und Theorie, Veröffentlichung des Instituts für Stahlbau und Werkstoffmechanik der Technischen Universität Darmstadt, Inst. für Stahlbau und Werkstoffmechanik.
31. Yang, Y. (2014). Linear Elastic Fracture Mechanics-Based Simulation of Fatigue Crack Growth Under Non-Proportional Mixed-Mode Loading, TU Darmstadt, Inst. für Stahlbau und Werkstoffmechanik.
32. Numerical study of fatigue crack initiation and propagation on optimally designed cruciform specimens10.1016/j.prostr.2016.02.014 ↗
33. Review of fatigue crack growth under non-proportional mixed-mode loading10.1016/j.ijfatigue.2013.04.001 ↗
34. Schirmeisen, N.-H. (2012). Risswachstum unter 3D-Mixed-Mode-Beanspruchung, VDI-Verlag.
35. Computational simulation and experimental findings of three-dimensional fatigue crack growth in a single-edge notched specimen under torsion loading10.1111/j.1460-2695.2005.00864.x ↗
36. Computational fracture analysis of different specimens regarding 3D and mode coupling effects10.1016/S0013-7944(00)00104-1 ↗
37. BEASY (2011). V10r14 Documentation, C.M.BEASY Ltd.
38. In-phase and out-of-phase mixed mode loading: Investigation of fatigue crack growth in SEN specimen due to tension–compression and torsional loading10.1016/j.tafmec.2020.102586 ↗
39. Pilsen Toll, s.r.o. (2016). Inspection Certificate 3.1—DIN EN 10204 for 34CrNiMo6+QT/1.6582/AISI 4340, Pilsen Toll s.r.o.
40. Investigation of mixed mode fatigue crack propagation in SEN-specimen under in-phase and out-of-phase conditions due to tension-compression and torsional loading10.1051/matecconf/201930011006 ↗
41. (2020, August 04). Matelect Ltd., Harefield, Matelect DCM-2. Available online: http://www.matelect.com/DCM2.html.
42. Optimal stress locations in finite element models10.1002/nme.1620100202 ↗
43. On the use of isoparametric finite elements in linear fracture mechanics10.1002/nme.1620100103 ↗
44. General behavior of collapsed 8-node 2-D and 20-node 3-D isoparametric elements10.1002/nme.1620360708 ↗
45. Dhondt, G., and Wittig, K. (2020, December 08). CalculiX. Available online: www.calculix.de.
46. Hahn, H.G. (1976). Bruchmechanik, B. G. Teubner.
47. Automatic 3-D crack propagation calculations: A pure hexahedral element approach versus a combined element approach10.1007/s10704-009-9313-z ↗
48. A modified cyclic crack propagation description10.1016/j.engfracmech.2015.07.020 ↗
49. Prediction of three-dimensional crack propagation paths taking high cycle fatigue into account10.3221/IGF-ESIS.35.13 ↗
50. Cyclic Mixed-Mode Crack Propagation due to Time-Dependent Multiaxial Loading in Jet Engines10.4028/www.scientific.net/KEM.488-489.93 ↗
51. Rodella, J. (2020). Experimental Verification of Three-Dimensional Mixed-Mode Crack Propagation Analysis. [Master’s Thesis, Politecnico of Turin and Technical University of Munich].
52. A crack opening stress equation for fatigue crack growth10.1007/BF00020751 ↗