journal article·2023-06-16Open access

Unconventional Arrays for 3D Electrical Resistivity and Induced Polarization Tomography to Detect Leachate Concentration in a Waste Landfill

Raffaele Martorana, Patrizia Capizzi, Calogero Pirrera

Applied Sciences· Volume 13· Issue 12

Abstract

In recent times, 3D electrical resistivity and induced polarization tomographies are being used more frequently. However, it is often not possible to have regular grids of electrodes due to irregular topography, difficulty accessing urbanized or industrialized places, and other environmental and health problems. In these cases, the use of unconventional arrays is necessary, arranging the electrodes around the inaccessible area according to one or more open or closed polygonal traces. In this work, three different perimeter arrangements of electrodes are considered, and, for each, three different electrode array configurations are tested by calculating their apparent resistivity and solving the inverse problem on a three-dimensional model with resistive and conductive blocks. The comparison of the results showed that the dataset that produces the most realistic inverse model consists of electrodes arranged in concentric squares and the use of the Full Range Gradient (FRG) Array. This combination was evaluated in the field on a waste landfill, in which electrical resistivity and induced polarization tomographies were carried out, exploiting the access paths to the various sectors of the landfill to arrange the electrodes on approximately concentric polygons. The 3D models of electrical resistivity and induced polarization allowed the detection of zones of high concentration of leachate, defining their extension, and monitoring the functioning of the waterproofing membrane at the bottom of the landfill. The results proved that when it is not possible to arrange a regular grid of electrodes, the use of perimeter disposals of electrode joined to the FRG array provide a sufficiently homogeneous resolution below the area to be investigated.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Geophysical and Geoelectrical Methods · Geophysical Methods and Applications · Seismic Waves and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dipartimento di Scienze della Terra e del Mare, Università degli Studi di Palermo, 90123 Palermo, Italy

Independent Researcher, 90100 Palermo, Italy

References (46)

Show source-provided references
1. Resistivity Sounding measurements
2. Resistivity modelling for arbitrarily shaped two-dimensional structures10.1111/j.1365-2478.1979.tb00961.x ↗
3. Electromagnetic and electrical modeling by the finite element method10.1190/1.1440151 ↗
4. Resistivity inversion with ridge regression10.1190/1.1440569 ↗
5. High-resolution geoelectrical tomographies in the study of Giarrossa landslide (southern Italy)10.1007/s10064-002-0184-z ↗
6. Evolution of soil wetting patterns preceding a hydrologically induced landslide inferred from electrical resistivity survey and point measurements of volumetric water content and pore water pressure10.1002/2013WR014560 ↗
7. Nature of surface electrical conductivity in natural sands, sandstones, and clays10.1029/98GL00296 ↗
8. Reconstructing the formation of a costal aquifer in Nampula province, Mozambique, from ERT and IP methods for water prospection10.1007/s12665-016-6364-0 ↗
9. Gonzales Amaya, A., Dahlin, T., Barmen, G., and Rosberg, J.E. (2016). Electrical resistivity tomography and induced polarization for mapping the subsurface of alluvial fans: A case study in Punata (Bolivia). Geosciences, 6.10.3390/geosciences6040051 ↗
10. An overview of the spectral induced polarization method for near-surface applications10.3997/1873-0604.2012027 ↗
11. 3D ground model development for an active landslide in Lias mudrocks using geophysical, remote sensing and geotechnical methods10.1007/s10346-013-0409-1 ↗
12. Spectral induced polarization of clay-sand mixtures: Experiments and modelingPolarization of clay-sand mixtures10.1190/geo2013-0347.1 ↗
13. Recent developments in the direct-current geoelectrical imaging method10.1016/j.jappgeo.2013.02.017 ↗
14. A multi-electrode array for resistivity surveying10.3997/1365-2397.1985013 ↗
15. Practical techniques for 3D resistivity surveys and data inversion110.1111/j.1365-2478.1996.tb00162.x ↗
16. Dahlin, T., and Bernstone, C. (1997, January 25–29). A roll-along technique for 3D resistivity data acquisition with multi-electrode arrays. Proceedings of the 10th EEGS Symposium on the Application of Geophysics to Engineering and Environmental Problems. European Association of Geoscientists & Engineers, Nashville, TN, USA.10.3997/2214-4609-pdb.204.1997_096 ↗
17. Comparison of different sets of array configurations for multichannel 2D ERT acquisition10.1016/j.jappgeo.2016.12.012 ↗
18. The MYG methodology to carry out 3D electrical resistivity tomography on media covered by vulnerable surfaces of artistic value
19. Resolution of 3-D electrical resistivity images from inversions of 2-D orthogonal lines10.2113/JEEG10.4.339 ↗
20. River terrace sand and gravel deposit reserve estimation using three-dimensional electrical resistivity tomography for bedrock surface detection10.1016/j.jappgeo.2013.03.002 ↗
21. Integration of constrained electrical and seismic tomographies to study the landslide affecting the cathedral of Agrigento10.1088/1742-2132/11/4/045009 ↗
22. Chávez, G., Tejero, A., Alcantara, M., and Chavez, R. (2011, January 17–22). The ‘L-Array’, a tool to characterize a fracture pattern in an urban zone: Extended Abstracts of the 2011 Near Surface Geophysics meeting. Proceedings of the European Section Meeting, Hull, UK.10.3997/2214-4609.20144474 ↗
23. L-and CORNER-arrays for 3D electric resistivity tomography: An alternative for geophysical surveys in urban zones10.3997/1873-0604.2015015 ↗
24. A full-range gradient survey for 2D electrical resistivity tomography10.1002/nsg.12125 ↗
25. Multiple-gradient array measurements for multichannel 2D resistivity imaging10.3997/1873-0604.2005037 ↗
26. Comparative tests on different multi-electrode arrays using models in near-surface geophysics10.1088/1742-2132/6/1/001 ↗
27. Loke, M. (2017). 3-D Resistivity and Ip forward Modeling Using the Finite-Difference and Finite-Element Methods. Instruction Manual for RES3DMOD Ver. 2.14 and RES3DMODx64 Ver. 3.04, Geotomosoft Solutions.
28. Improving the resolution of 3-D resistivity surveys along the perimeter of a confined area using optimized arrays10.1007/s00024-018-2061-0 ↗
29. A modified pseudosection for resistivity and IP10.1190/1.1440762 ↗
30. Catalano, R., Basilone, L., Di Maggio, C., Gasparo Morticelli, M., Agate, M., and Avellone, G. (2013). Note Illustrative della Carta Geologica d’Italia alla Scala 1: 50.000 del Foglio 594–585 “Partinico-Mondello”.
31. Contino, A., Cusimano, G., and Frias Forcada, A. (1998, January 21–23). Modello idrogeologico dei Monti di Palermo. Proceedings of the Atti del 79 Congresso Nazionale della Società Geologica Italiana, Palermo, Italy.
32. Integrated use of unmanned aerial vehicle photogrammetry and terrestrial laser scanning to support archaeological analysis: The Acropolis of Selinunte case (Sicily, Italy)10.1002/arp.1804 ↗
33. Tracking contaminant transport using time-lapse geophysics: A review on applications of electrical methods10.1016/j.wasec.2022.100127 ↗
34. DC resistivity mapping of old landfills: Two case studies
35. DC resistivity and induced polarisation investigations at a waste disposal site and its environments10.1016/S0926-9851(99)00022-1 ↗
36. DC-resistivity mapping of internal landfill structures: Two pre-excavation surveys10.1007/s002540050015 ↗
37. Leachate recirculation: Moisture content assessment by means of a geophysical technique10.1016/j.wasman.2004.03.010 ↗
38. Electrical resistivity tomography applied to geologic, hydrogeologic, and engineering investigations at a former waste-disposal site10.1190/1.2360184 ↗
39. Characterization of a dismissed landfill via electrical resistivity tomography and mise-à-la-masse method10.1016/j.jappgeo.2013.07.010 ↗
40. Characterization of legacy landfills with electrical resistivity tomography; a comparative study10.1016/j.jappgeo.2022.104716 ↗
41. Characterisation of a NAPL-contaminated former quarry site using electrical impedance tomography10.3997/1873-0604.2005003 ↗
42. A 3-D resistivity investigation of a contaminated site at Lernacken, Sweden10.1190/1.1527070 ↗
43. Improvement of electrical resistivity tomography for leachate injection monitoring10.1016/j.wasman.2009.10.002 ↗
44. Detailed landfill leachate plume mapping using 2D and 3D electrical resistivity tomography-with correlation to ionic strength measured in screens10.1016/j.jappgeo.2017.01.019 ↗
45. Electrical resistivity and induced polarization tomographies to test the efficiency and safety of the new landfill of Bellolampo (Palermo, Italy)
46. Loke, M. (2017). Rapid 3-D Resistivity and IP Inversion Using the Least-Squares Method. Instruction Manual for RES3DINVx64 Ver. 3.13, Geotomosoft Solutions.