Seismic Responses of a Cable-Stayed Bridge with Consideration of Uniform Temperature Load
Source abstract
Abstract
The effects of temperature load on the dynamic responses of cable-stayed bridges have attracted the attention of researchers in recent years. However, these investigations mainly focus on the influence of temperature on the dynamic characteristics of structures, such as vibration mode and frequency. This paper discusses the effects of uniform temperature changes on the seismic responses of a cable-stayed bridge. A three dimensional finite element model of a cable-stayed bridge using OpenSees is established for nonlinear time history analysis, and uniform temperature load is applied to the prototype bridge before the conducting of seismic excitation. Three ground motion records are selected from the PEER strong motion database based on the design spectrum. Case studies are then performed considering the varying temperature and the connections between the deck and pylons of the bridge. The result shows that the seismic responses of the bridge are significantly increased with the consideration of temperature load. Meanwhile, the types between the deck and pylon also have notable impacts on the seismic responses of the bridge with and without temperature changes. This research could provide a reference for designers during the design phase of cable-stayed brides.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Elevator Systems and Control · Advanced Fiber Optic Sensors · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China
School of Civil and Hydraulic Engineering, Hefei University of Technology, Hefei 230009, China
References (32)
Show source-provided references
1. Wang, J., Zou, X., Yan, X., and Li, S. (2015). Integrated analysis model for the seismic responses of cable-stayed bridges near active faults. J. Earthq. Tsunami, 9.10.1142/S1793431115500025 ↗
2. Seismic response of long span cable-stayed bridge to near-fault vertical ground motions10.1007/s12205-014-0214-y ↗
3. Near-fault isolation of cable-stayed bridges using RNC isolator10.1016/j.engstruct.2013.04.007 ↗
4. Novel isolation device for protection of cable-stayed bridges against near-fault earthquakes10.1061/(ASCE)BE.1943-5592.0000509 ↗
5. Seismic isolation of cable-stayed bridges for near-field ground motions10.1002/eqe.318 ↗
6. Nonlinear dynamic analysis of base isolated cable-stayed bridge under earthquake excitations10.1016/j.soildyn.2014.07.013 ↗
7. Dynamic non-linear behaviour of cable stayed bridges under seismic loadings
8. Soil-structure interaction modeling effects on seismic response of cable-stayed bridge tower10.1186/2008-6695-5-8 ↗
9. De, S., Wojtkiewicz, S.F., and Johnson, E.A. (2016). Efficient optimal design and design-under-uncertainty of passive control devices with application to a cable-stayed bridge. Struct. Control Health Monit.10.1002/stc.1846 ↗
10. Dynamic behavior of stay cables with passive negative stiffness dampers10.1088/0964-1726/25/7/075044 ↗
11. Zhu, J., Zhang, W., Zheng, K.F., and Li, H.G. (2015). Seismic design of a long-span cable-stayed bridge with fluid viscous dampers. Pract. Period. Struct. Des. Constr., 21.10.1061/(ASCE)SC.1943-5576.0000262 ↗
12. A case study on the application of passive control and seismic isolation techniques to cable-stayed bridges: A comparative investigation through non-linear dynamic analyses10.1016/j.engstruct.2015.04.048 ↗
13. Application of shape memory alloy dampers in the seismic control of cable-stayed bridges10.1016/j.engstruct.2008.11.007 ↗
14. Extending the benchmark cable-stayed bridge for transverse response under seismic loading10.1061/(ASCE)BE.1943-5592.0000532 ↗
15. A Summary review of correlations between temperatures and vibration properties of long-span bridges
16. Temperature-induced variations of measured modal frequencies of steel box girder for a long-span suspension bridge10.1007/s13296-011-2004-4 ↗
17. Temperature effects on cable stayed bridge using health monitoring system: A case study
18. Nonlinear response of elastic cables with flexural-torsional stiffness10.1016/j.ijsolstr.2015.09.019 ↗
19. Static and dynamic response of elastic suspended cables with thermal effects10.1016/j.ijsolstr.2012.01.008 ↗
20. Research on combination of seismic and temperature action effects of bridge structures
21. Effects of concurrent earthquake and temperature loadings on cable-stayed bridges10.1142/S0219455415500200 ↗
22. Zhong, J., Pang, Y., Jeon, J.S., Desroches, R., and Yuan, W. (2016). Seismic fragility assessment of long-span cable-stayed bridges in China. Adv. Struct. Eng.10.1177/1369433216649380 ↗
23. Nonlinear finite-element analysis software architecture using object composition10.1061/(ASCE)CP.1943-5487.0000002 ↗
24. Modelling of cable-stayed bridge for dynamic analysis10.1002/eqe.4290200802 ↗
25. Cable-deck dynamic interactions at the International Guadiana Bridge: On-site measurements and finite element modelling10.1002/stc.241 ↗
26. Der E-Modul von Seilen unter berucksichtigung des Durchhanges
27. Investigation of Dynamic Cable-deck Interaction in a Physical Model of a Cable-stayed Bridge. Part I: Modal Analysis10.1002/(SICI)1096-9845(200004)29:4<481::AID-EQE918>3.0.CO;2-1 ↗
28. Investigation of dynamic cable–deck interaction in a physical model of a cable-stayed bridge. Part II: Seismic response10.1002/(SICI)1096-9845(200004)29:4<499::AID-EQE919>3.0.CO;2-A ↗
29. Localization and veering in the dynamics of cable-stayed bridges10.1016/j.compstruc.2007.02.016 ↗
30. Caltrans new seismic design criteria for bridges10.1193/1.1586112 ↗
31. Effect of Pounding and restrainers on seismic response of multiple-frame bridges10.1061/(ASCE)0733-9445(2002)128:7(860) ↗
32. Ministry of Transport of the People’s Republic of China (MOT) (2008). Guidelines for Seismic Design of Highway Bridges.