Comparison of Laser-Engraved Hole Properties between Cold-Rolled and Laser Additive Manufactured Stainless Steel Sheets
Source abstract
Abstract
Laser drilling and laser engraving are common manufacturing processes that are found in many applications. With the continuous progress of additive manufacturing (3D printing), these processes can now be applied to the materials used in 3D printing. However, there is a lack of knowledge about how these new materials behave when processed or machined. In this study, sheets of 316L stainless steel produced by both the traditional cold rolling method and by powder bed fusion (PBF) were laser drilled by a nanosecond pulsed fiber laser. Results were then analyzed to find out whether there are measurable differences in laser processing parts that are produced by either PBF (3D printing) or traditional steel parts. Hole diameters, the widths of burn effects, material removal rates, and hole tapers were measured and compared. Additionally, differences in microstructures of the samples were also analyzed and compared. Results show negligible differences in terms of material processing efficiency. The only significant differences were that the PBF sample had a wider burn effect, and had some defects in the microstructure that were more closely analyzed. The defects were found to be shallow recesses in the material. Some of the defects were deep within the material, at the end and start points of the laser lines, and some were close to the surfaces of the sample.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Laser Processing, School of Energy Systems, Lappeenranta University of Technology, 53850 Lappeenranta, Finland
Machine Technology Center Turku Ltd., 20520 Turku, Finland
References (37)
Show source-provided references
1. Review on laser drilling I. Fundamentals, modeling, and simulation
2. Ready, J.F., and Farson, D.F. (2001). Drilling of Metals. LIA Handbook of Laser Materials Processing, Magnolia Publishing Inc.. [1st ed.].
3. Industrial applications of laser micromachining10.1364/OE.7.000056 ↗
4. Uchtmann, H., He, C., and Gillner, A. (2016, January 13). High precision and high aspect ratio laser drilling—Challenges and Solutions. Proceedings of the SPIE 9741, High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V, San Francisco, CA, USA.10.1117/12.2222662 ↗
5. Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond and nanosecond pulses10.1007/s00339-007-4300-6 ↗
6. Patwa, R., Herfurth, H., Flaig, R., Christophersen, M., and Phlips, B.F. (2014, January 19–23). Laser Drilling for High Aspect Ratio Holes and a High Open Area Fraction for Space Applications. Proceedings of the International Congress on Applications of Lasers & Electro-Optics, ICALEO, San Diego, CA, USA. Paper No. M1101.
7. Laser-beam helical drilling of high quality micro holes10.1016/j.phpro.2013.03.130 ↗
8. High speed laser micro drilling for aerospace applications10.1016/j.procir.2014.08.002 ↗
9. Experimental characterizations of burr deposition in Nd:YAG laser drilling: A parametric study10.1007/s00170-014-6377-3 ↗
10. Comparative statistical analysis of hole taper and circularity in laser percussion drilling10.1016/S0890-6955(02)00038-X ↗
11. Modeling and optimization of geometrical characteristics in laser trepan drilling of titanium alloy10.1007/s12206-016-0233-3 ↗
12. Experimental and numerical Investigation of Temperature Distribution and Hole Geometry during Laser Drilling Process
13. Laser Trepanning for Industrial Applications10.1016/j.phpro.2011.03.140 ↗
14. Laser trepanning of stainless steel10.1016/j.phpro.2013.03.126 ↗
15. Sequential Laser and EDM Micro-drilling for Next Generation Fuel Injection Nozzle Manufacture10.1016/S0007-8506(07)60393-X ↗
16. Uhlmann, E., Oberschmidt, D., and Langmack, M. (2013, January 20–25). Complex bore holes fabricated by combined Helical Laser Drilling and Micro Electrical Discharge Machining. Proceedings of the 28th Annual Meeting of the American Society for Precision Engineering, ASPE 2013, Saint Paul, MN, USA.
17. A study of thermal and mechanical effects on materials induced by pulsed laser drilling10.1007/BF01567635 ↗
18. Curved drilling via inner hole laser reflection10.1016/j.precisioneng.2016.04.004 ↗
19. Internal characterization and the hole formation mechanism in the laser percussion drilling process10.1016/j.ijmachtools.2013.08.004 ↗
20. Laser micro-drilling of tool steel using Nd:YAG lasers10.1016/S0924-0136(03)00651-4 ↗
21. Melt ejection during laser drilling of metals10.1016/S0921-5093(03)00155-2 ↗
22. On-Line Estimation of Laser-Drilled Hole Depth Using a Machine Vision Method10.3390/s120810148 ↗
23. Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel10.1016/j.optlastec.2014.07.021 ↗
24. The influence of the laser scan strategy on grain structure and cracking behavior in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
25. (2017, August 25). Stainless Steel—1.4542 (Stainless 17.4) Datasheet (Default) by 3D Alchemy. Available online: https://www.3d-alchemy.co.uk/assets/datasheets/3d-Alchemy-Stainless%20Steel%201-4542%20-%2001_13.pdf.
26. (2017, August 25). 1.4542 Steel Datasheet by Lucefin. Available online: http://www.lucefin.com/wp-content/files_mf/1.4542pha63062.pdf.
27. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting10.1007/s00170-014-6297-2 ↗
28. Spierings, A.B., and Levy, G. (2009, January 3–5). Comparison of density of stainless steel 316L parts produced with selective laser melting using different powder grades. Proceedings of the Twentieth Annual International Solid Freeform Fabrication (SFF) Symposium, Austin, TX, USA.
29. (2017, August 25). Think3d Web Page. Available online: https://www.additively.com/en/material/from/eos/eos-stainless-steel-316l.
30. (2017, August 25). Outokumpu Data Sheet for 316 and 316L. Available online: http://www.outokumpu.com/SiteCollectionDocuments/Datasheet-316-316L-imperial-hpsa-outokumpu-en-americas.pdf.
31. An Experimental investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel10.1007/s11661-014-2549-x ↗
32. Hole Taper Characterisation and Control in Laser Percussion Drilling10.1016/S0007-8506(07)61488-7 ↗
33. Femtosecond, picosecond and nanosecond laser ablation of solids10.1007/BF01567637 ↗
34. Laser drilling velocity in metals10.1063/1.322578 ↗
35. Effect of Pulse Length on Engraving Efficiency in Nanosecond Pulsed Laser Engraving of Stainless Steel10.1007/s11663-015-0415-x ↗
36. (2017, April 15). British Stainless Steel Association. Available online: http://www.bssa.org.uk/topics.php?article=140.
37. Geometrical features and metallurgical characteristics of Nd:YAG laser drilled holes in thick IN718 and Ti-6Al-4V sheets10.1016/S0924-0136(02)00270-4 ↗