A Three-Axis Magnetic Field Microsensor Fabricated Utilizing a CMOS Process
Source abstract
Abstract
This study develops a three-axis magnetic field (MF) microsensor manufactured by a complementary metal oxide semiconductor (CMOS) process. The MF microsensor contains a ring emitter, four bases, and eight collectors. Sentaurus TCAD was used to simulate the microsensor characterization. The STI (shallow trench isolation) oxide in the process was used to limit the current direction and reduce leakage current. The microsensor produces a voltage difference once it senses a magnetic field. An amplifier circuitry magnifies voltage difference into a voltage output. Experiments reveals that the MF microsensor has a sensitivity of 1.45 V/T along the x-axis and a sensitivity of 1.37 V/T along the y-axis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnetic Field Sensors Techniques · Plasma Diagnostics and Applications · Sensor Technology and Measurement Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, National Chung Hsing University, Taichung 402, Taiwan
Department of Civil and Environmental Engineering, National University of Kaohsiung, Kaohsiung 811, Taiwan
Department of Electro-Optical Engineering, Yuan Ze University, Taoyuan 320, Taiwan
References (30)
Show source-provided references
1. Upper Limb kinematics using inertial and magnetic sensors: Comparison of sensor-to-segment calibrations10.3390/s150818813 ↗
2. Field-concentrator-based resonant magnetic sensor with integrated planar coils10.1109/JMEMS.2009.2031675 ↗
3. Magnetic sensor for building structural vibrations10.3390/s140202468 ↗
4. Ali, E., and Memari, A.R. (2010, January 20–22). Effects of Magnetic Field of Power Lines and Household Appliances on Human and Animals and Its Mitigation. Proceedings of the 2010 IEEE Middle East Conference on Antennas and Propagation (MECAP), Cairo, Egypt.10.1109/MECAP.2010.5724167 ↗
5. A 3-axis miniature magnetic sensor based on a planar fluxgate magnetometer with an orthogonal fluxguide10.3390/s150614727 ↗
6. Fabrication and characterization of a tunable In-plane resonator with low driving voltage10.3390/s90302062 ↗
7. A micromachined microwave switch fabricated by the complementary metal-oxide semiconductor post-process of etching silicon dioxide10.1143/JJAP.44.6804 ↗
8. Optical characterization of Lorentz force based CMOS-MEMS magnetic field sensor10.3390/s150818256 ↗
9. Gardner, J.W., Varadan, V.K., and Awadelkarim, O.O. (2001). Microsensors MEMS and Smart Devices, John Wiley & Son Ltd.10.1002/9780470846087 ↗
10. Modeling and manufacturing of a micromachined magnetic sensor using the CMOS process without any post-process10.3390/s140406722 ↗
11. Wattanasarn, S., Matsumoto, K., and Shimoyama, I. (2013, January 20–24). 3D Lorentz force Magnetic Sensor Using Ultra-Thin Piezoresistive Cantilevers. Proceedings of the 2013 IEEE 26th International Conference on Micro Electro Mechanical Systems (MEMS), Taipei, Taiwan.10.1109/MEMSYS.2013.6474337 ↗
12. Modeling and fabrication of micro FET pressure sensor with Circuits10.3390/s7123386 ↗
13. MEMS torsion oscillator magnetic field sensor10.1109/TMAG.2013.2252153 ↗
14. Zhang, W., and Lee, J.E.Y. (2013, January 16–20). Characterization and model validation of a micromechanical resonant magnetic field sensor. Proceedings of the 17th International Conference on Solid-State Sensors, Actuators and Microsystems, Barcelona, Spain.10.1109/Transducers.2013.6627153 ↗
15. Huang, W.S., Lu, C.C., and Jeng, J.T. (2010, January 1–4). A novel 3D CMOS micro-fluxgate magnetic sensor for low magnetic field detection. Proceedings of the IEEE Sensors, Waikoloa, HI, USA.
16. Bipolar magnetic microsensor for longitudinal fields10.1016/j.sna.2003.10.052 ↗
17. Fabrication and characteristics of the suppressed sidewall injection magnetotransistor using a CMOS process10.1016/j.sna.2005.11.052 ↗
18. Two-dimensional folded CMOS Hall device with interacting lateral magnetotransistor and magnetoresistor10.1016/j.sna.2012.04.039 ↗
19. Estrada, H.V. (2011, January 23–27). A MEMS-SOI 3D-magnetic field sensor. Proceedings of the 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems (MEMS), Cancun, Mexico.10.1109/MEMSYS.2011.5734512 ↗
20. The fringe-capacitance of etching holes for CMOS-MEMS10.3390/mi6111445 ↗
21. A maskless post-CMOS bulk micromachining process and its application10.1088/0960-1317/15/12/019 ↗
22. A circular micromirror array fabricated by a maskless post-CMOS process10.1007/s00542-004-0486-0 ↗
23. A surface micromachined CMOS MEMS humidity sensor10.3390/mi6101440 ↗
24. Fabrication and characterization of polyaniline/PVA humidity microsensors10.3390/s110808143 ↗
25. Cobalt oxide nanosheet and CNT micro carbon monoxide sensor integrated with readout circuit on chip10.3390/s100301753 ↗
26. Monolithic piezoresistive CMOS magnetic field sensors10.1016/S0924-4247(02)00317-5 ↗
27. Design Considerations for CMOS-Integrated Hall-Effect Magnetic Bead Detectors for Biosensor Applications10.1109/JMEMS.2013.2259615 ↗
28. Responsivity and noise of a wire-bonded CMOS micro-fluxgate sensor10.1016/j.sna.2012.03.008 ↗
29. Sedra, A.S., and Smith, K.C. (1998). Microelectronic Circuits, Oxford University Press.
30. Leepattarapongpan, C., Penpondee, N., Phetchakul, T., Phengan, W., Chaowicharat, E., Hruanun, C., and Poyai, A. (2008, January 26–29). Merged Three-Terminal Magnetotransistor Based on the Carrier Recombination-Deflection Effect. Proceedings of the 2008 IEEE Sensors, Lecce, Italy.10.1109/ICSENS.2008.4716463 ↗