journal article·2018-03-26Open access

Rock Fragmentation Characteristics by TBM Cutting and Efficiency under Bi-Lateral Confinement

Yulong Chen, Chenpeng Song

Applied Sciences· Volume 8· Issue 4

Abstract

In this study, the mechanisms of rock breakage are assessed using tunnel boring machine (TBM) disc cutters under bi-axial pressure. Sequential indentation tests were conducted on granite specimens using a tri-axial testing platform. The morphology and volume of the fractured surface were measured and analyzed using a three-dimensional surface profilometer. An analysis of rock breaking growth and efficiency was performed as well. When the minor confining pressure (σ1) is constant, the results show that a larger difference in confining pressure leads to a larger volume of fractured surface, thereafter improving the rock-breaking efficiency even though the penetration energy is enlarged. On the other hand, when the major confining pressure (σ2) is constant, the penetration energy increases proportionally with the σ1; however, the volume of fractured surface is decreased, and the breaking efficiency is attenuated as well.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tunneling and Rock Mechanics · Drilling and Well Engineering · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing 100084, China

Department of Energy and Mineral Engineering, EMS Energy Institute and G3 Center, Pennsylvania State University, University Park, PA 16802, USA

Key Laboratory of Hydraulic and Waterway Engineering of the Ministry of Education, Chongqing Jiaotong University, Chongqing 400074, China

References (31)

Show source-provided references
1. Ozdemir, L., and Wang, F.D. (1979). Mechanical Tunnel Boring Prediction and Machine Design, Colorado School of Mines.
2. Gertsch, R.E. (2000). Rock Toughness and Disc Cutting, University of Missouri.
3. The effect of fracture patterns on penetration rate of TBM in fractured rock mass using probabilistic numerical approach10.1007/s12517-013-1070-7 ↗
4. Evaluation of fragments from disc cutting of dry and saturated sandstone10.1007/s00603-013-0482-8 ↗
5. Development of a rock mass characteristics model for TBM penetration rate prediction10.1016/j.ijrmms.2008.03.003 ↗
6. Utilizing rock mass properties for predicting TBM performance in hard rock condition10.1016/j.tust.2007.04.011 ↗
7. Numerical modeling of the effects of joint orientation on rock fragmentation by TBM cutters10.1016/j.tust.2004.08.006 ↗
8. Influence of rock brittleness on TBM penetration rate in Singapore granite10.1016/j.tust.2006.07.004 ↗
9. Numerical simulation of the rock fragmentation process induced by two drill bits subjected to static and dynamic (impact) loading
10. Response of rocks to impact loading by bars with pointed ends10.1007/BF01239036 ↗
11. Numerical study on mode of breaking rock by TBM cutter in two cutting orders
12. Simulating the effects of disc erosion in TBM DISC cutters by a semi-infinite DDM
13. Analyses of dynamic characteristics and structure optimization of tunnel boring machine cutter system with multi-joint surface10.1007/s11071-016-3038-0 ↗
14. Application of a small-timescale fatigue, crack-growth model to the plane stress/strain transition in predicting the lifetime of a tunnel-boring-machine cutter head10.1016/j.engfailanal.2016.11.002 ↗
15. Electromechanical coupling dynamics of TBM main drive system10.1007/s11071-017-3831-4 ↗
16. The multi-stage rock fragmentation load prediction model of tunnel boring machine cutter group based on dense core theory10.1007/s00170-016-9375-9 ↗
17. Experimental study of TBM penetration in marble rock mass under high geostress
18. Study on rock mass boreability by TBM penetration test under different in situ stress conditions10.1016/j.tust.2014.06.002 ↗
19. Tarkoy, P.J., and Marconi, M. (1991, January 14–18). Difficult rock comminution and associated geological conditions. Proceedings of the International Symposium: Tunnelling ’91, London, UK.
20. Bilgin, N., Tuncdemir, H., Balci, C., Copur, H., and Eskikaya, S. (2000, January 13–17). A model to predict the performance of tunneling machines under stressed conditions. Proceedings of the AITES-ITA 2000 World Tunnel Congress, Durban, South Africa.
21. Experimental and numerical studies on rock breaking with TBM tools under high stress confinement10.1007/s00603-006-0109-4 ↗
22. Normal wedge indentation in rocks with lateral confinement10.1007/s006030050010 ↗
23. Observation of crack growth in hard rock loaded by an indenter10.1016/0148-9062(84)91177-X ↗
24. Numerical simulation of the rock fragmentation process induced by indenters10.1016/S1365-1609(02)00043-6 ↗
25. Numerical study of the effect of confining stress on rock fragmentation by TBM cutters10.1016/j.ijrmms.2011.05.002 ↗
26. Correlation of rock cutting tests with field performance of a TBM in a highly fractured rock formation: A case study in Kozyatagi-Kadikoy metro tunnel, Turkey10.1016/j.tust.2008.12.001 ↗
27. Performance prediction of TBM disc cutting on granitic rock by the linear cutting test10.1016/j.tust.2005.12.131 ↗
28. A novel true triaxial apparatus to study the geomechanical and fluid flow aspects of energy exploitations in geological formations10.1007/s00603-016-1060-7 ↗
29. Use of indentation tests to study the influence of confining stress on rock fragmentation by a TBM cutter10.1016/j.ijrmms.2014.07.022 ↗
30. DISC cutting tests in Colorado red granite: Implications for TBM performance prediction10.1016/j.ijrmms.2006.07.007 ↗
31. Simultaneous effects of joint spacing and orientation on TBM cutting efficiency in jointed rock masses10.1007/s00603-012-0314-2 ↗