journal article·2018-03-12Open access

A Study on the Influence of Stage Load on Health Monitoring of Axial Concrete Members Using Piezoelectric Based Smart Aggregate

Chengcheng Du, Dujian Zou, Tiejun Liu, Weijie Li

Applied Sciences· Volume 8· Issue 3

Abstract

Piezoceramic based smart aggregate (SA) has been employed to monitor the strength development of early age concrete. The validity of SA-based active sensing method was tested and verified with loading and unloading conditions. However, the early age concrete in buildings is subjected to many load increments during the construction process. The influence of incremental load on the properties of the propagating waves is still unclear. This study aims to investigate the effects of axial stage loads on the signal response of the SA. The concrete specimens that are embedded with SA’s were loaded step by step, and the amplitude and wave velocity of the sensing signals were measured at each stress state. The experimental results indicated that the amplitude of the received signal decrease with the increase of the stress level. As for the velocity of the propagated stress wave, however, the velocity shows an increasing trend before a sharp decline at high stress level.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055, China

Funding

National Science Foundation of China · Guangdong Provincial Natural Science Foundation of China · National Nature Science Foundation of China · Shenzhen Overseas Talents Innovation and Entrepreneurship Special Fund · Program of Shenzhen Science and Technology Plan

References (33)

Show source-provided references
1. Electrical effects generated by mechanical loading of hardened Portland cement paste10.1016/S0958-9465(02)00053-7 ↗
2. Study of the chloride diffusion in mortar: A new method of determining diffusion coefficients based on impedance measurements10.1016/j.cemconcomp.2006.01.009 ↗
3. Moisture Distribution in Partially Saturated Concrete Studied by Impedance Spectroscopy10.1007/s10921-013-0190-z ↗
4. International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM) (2007). RILEM Report 40 Non-Destructive Evaluation of the Penetrability and Thickness of the Concrete Cover, RILEM.
5. Williams, M., Ortega, J.M., Sánchez, I., Cabeza, M., and Climent, M.Á. (2017). Non-Destructive Study of the Microstructural Effects of Sodium and Magnesium Sulfate Attack on Mortars Containing Silica Fume Using Impedance Spectroscopy. Appl. Sci., 7.10.3390/app7070648 ↗
6. Structural health monitoring in mainland China: Review and future trends10.1177/1475921710365269 ↗
7. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W., Nadler, B.R., and Czarnecki, J.J. (2004). A review of structural health monitoring literature: 1996–2001, Los Alamos National Laboratory Report.
8. An overheight vehicle–bridge collision monitoring system using piezoelectric transducers10.1088/0964-1726/16/2/026 ↗
9. Concrete early-age strength monitoring using embedded piezoelectric transducers10.1088/0964-1726/15/6/038 ↗
10. Integrating embedded piezoelectric sensors with continuous wavelet transforms for real-time concrete curing strength monitoring10.1080/15732479.2014.920397 ↗
11. Real-time strength development monitoring for concrete structures using wired and wireless electro-mechanical impedance techniques10.1007/s12205-013-0390-1 ↗
12. Choi, S., Tareen, N., Kim, J., Park, S., and Park, I. (2018). Real-Time Strength Monitoring for Concrete Structures Using EMI Technique Incorporating with Fuzzy Logic. Appl. Sci., 8.10.3390/app8010075 ↗
13. Exploratory study on water seepage monitoring of concrete structures using piezoceramic based smart aggregates10.1088/0964-1726/22/6/065002 ↗
14. Feasibility of water seepage monitoring in concrete with embedded smart aggregates by P-wave travel time measurement10.1088/0964-1726/23/6/067003 ↗
15. A Experimental Study on the Performance of Piezoceramic Based Smart Aggregate in Water Environment10.1109/JSEN.2014.2302893 ↗
16. Multi-functional smart aggregate-based structural health monitoring of circular reinforced concrete columns subjected to seismic excitations10.1088/0964-1726/19/6/065026 ↗
17. Smart aggregate-based damage detection of circular RC columns under cyclic combined loading10.1088/0964-1726/19/6/065021 ↗
18. Acoustoelastic Effect in concrete material under uni-axial compressive loading10.1016/j.ndteint.2010.07.001 ↗
19. Effects of environmental and operational variability on structural health monitoring. Philosophical Transactions of the Royal Society
20. Vibration-based damage detection in civil engineering: Excitation sources and temperature effects10.1088/0964-1726/10/3/314 ↗
21. An experimental investigation on the health monitoring of concrete structures using piezoelectric transducers at various environmental temperatures10.1177/1045389X14566525 ↗
22. Influence of Axial Loads on the Health Monitoring of Concrete Structures Using Embedded Piezoelectric Tranducers10.1177/1475921716670573 ↗
23. A primary study on the performance of piezoceramic based smart aggregate under various compressive stresses10.1088/1361-665X/aa891a ↗
24. Du, C., Zou, D., Liu, T., and Lv, H. (2017). An exploratory experimental and 3D numerical investigation on the effect of porosity on wave propagation in cement paste. Measurement.10.1016/j.measurement.2017.10.025 ↗
25. Rizzo, P., Deng, W., and Vandenbossche, J. (2016). Detecting the presence of high water-to-cement ratio in concrete surfaces using highly nonlinear solitary waves. Appl. Sci., 6.10.3390/app6040104 ↗
26. Nondestructive testing of concrete using highly nonlinear solitary waves10.1080/10589759.2016.1254212 ↗
27. Time-dependent strain development of early age concrete under step by step load history10.1016/j.conbuildmat.2015.03.116 ↗
28. Crack sealing and damage recovery monitoring of a concrete healing system using embedded piezoelectric transducers10.1177/1475921715596219 ↗
29. Comité Euro-International du Béton (CEB) (1990). CEB-FIP Model Code for Concrete Structures, CEB.
30. GB/50010-2010 (2010). Code for Design of Concrete Structures.
31. Smart aggregates: Multi-functional sensors for concrete structures—A tutorial and a review10.1088/0964-1726/17/3/033001 ↗
32. A note on the measurement of travel times using bender and extender elements10.1016/j.soildyn.2010.02.003 ↗
33. Wang, L. (2010). Foundation of Stress Waves, National Defense Industry Press.