Influence of Stress and Crack Patterns on the Sensitive Characteristics of Fissure Sandstone Permeability under Hydromechanical Coupling
Source abstract
Abstract
The stress-sensitive of seepage characteristics after rock fracture has a crucial effect on the formation and closure of seepage channels, and it is important to study the sensitivity of fracture permeability for engineering seepage prevention. The aim of the current study was to investigate the permeability law of different fracture modes under unloading action. Firstly, the physical and mechanical parameters of the Voronoi polygon block and joint were fitted with rock properties obtained in the laboratory based on the fracture characteristics of triaxial seepage experiment samples. Crack reconstruction technology and a new hydraulic parameter fitting method were used to obtain the hydraulic aperture of microjoints and macrocracks. Then, six single crack models and four models based on typical fracture characteristics of rock samples were established to study the variation of the hydraulic aperture of microcracks and macroscopic cracks in unloading environment and the morphology of the main seepage passages, to explore the seepage characteristics of different angle cracks under different unloading stress paths, and to analyze the law of seepage variation of different crack forms under different stress environments. The results indicated that a horizontal hydraulic aperture is more sensitive to axial stress than a vertical hydraulic aperture and that a vertical hydraulic aperture is more sensitive to confining stress than a horizontal hydraulic aperture. For a single crack model, the sensitivity of a 70–90-degree crack to confining pressure is greater than that of a 40–60-degree crack. The axial stress sensitivity of a 40–60-degree crack is greater than that of a 70–90-degree crack. For a typical fracture model, under the same stress conditions, the sensitivity of four typical cracks to confining pressure is greater than that to axial pressure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Hydraulic Fracturing and Reservoir Analysis · Dam Engineering and Safety
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Coal Resources and Safe Mining, School of Mines, China University of Mining and Technology, Xuzhou 221116, China
Funding
dongsheng zhang · gangwei Fan
References (36)
Show source-provided references
1. An experimental study on the permeability law of natural fracture under 3-d stresses
2. Forster, I., and Enever, J. (1992). Hydrogeological Response of Overburden Strata to Underground Mining, Office of Energy. Report 1.
3. Choi, S.K., Wold, M., and Wood, J. (1997, January 24–25). Modelling of interburden gas flows at Appin Colleiry. Proceedings of the Symposium on Safety on Mines: The Role of Geology, Newcastle, UK.
4. Permeability and pressure distribution characteristics of the roadway surrounding rock in the damaged zone of an excavation10.1016/j.ijmst.2017.01.003 ↗
5. Xia, B., Zhang, X., Yu, B., and Jia, J. (2018). Weakening effects of hydraulic fracture in hard roof under the influence of stress arch. Int. J. Min. Sci. Technol.10.1016/j.ijmst.2017.12.024 ↗
6. Zhao, Y.L. (2016). The fluid-solid coupling response in fractured rock mass and its engineering application. The Introduction, Science Press. [1st ed.].
7. Elastic and transport properties of an in situ jointed granite10.1016/0148-9062(77)90560-5 ↗
8. The permeability of whole and jointed Barre granite10.1016/0148-9062(79)91197-5 ↗
9. Experimental and Numerical Investigation of Permeability Evolution with Damage of Sandstone Under Triaxial Compression10.1007/s00603-017-1169-3 ↗
10. The transition from brittle faulting to cataclastic flow: Permeability evolution10.1029/96JB03282 ↗
11. Shear-enhanced compaction and permeability reduction: Triaxial extension tests on porous sandstone10.1016/S0167-6636(97)00011-2 ↗
12. Fluid permeability of sedimentary rocks in a complete stress-strain process10.1016/S0013-7952(01)00088-6 ↗
13. Experimental research on mechanical properties of granites under unloading condition
14. Experimental study of permeability and acoustic emission characteristics of sandstone during processes of unloading confining pressure and deformation
15. Geomechanical and flow properties of coal from loading axial stress and unloading confining pressure tests10.1016/j.ijrmms.2015.03.019 ↗
16. Study of a Seepage Channel Formation Using the Combination of Microseismic Monitoring Technique and Numerical Method in Zhangmatun Iron Mine10.1007/s00603-016-1007-z ↗
17. Three-zone characterisation of coupled strata and gas behaviour in multi-seam mining10.1016/j.ijrmms.2015.04.018 ↗
18. Modelling of Longwall Mining-Induced Strata Permeability Change10.1007/s00603-014-0551-7 ↗
19. A review of discrete modeling techniques for fracturing processes in discontinuous rock masses10.1016/j.jrmge.2013.12.007 ↗
20. Numerical methods in rock mechanics10.1016/S1365-1609(02)00065-5 ↗
21. Bai, Q.S., Tu, S.H., and Zhang, C. (2016). DEM investigation of the fracture mechanism of rock disc containing hole(s) and its influence on tensile strength. Theor. Appl. Fract. Mech., 86.10.1016/j.tafmec.2016.07.005 ↗
22. 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided microfracturing10.1016/j.jrmge.2014.09.001 ↗
23. Itasca Consulting Group Inc (2011). UDEC: Universal Distinct Element Code, ICG. Version 5.0.
24. Evidence for a long-term strength threshold in crystalline rock10.1007/s00603-010-0090-9 ↗
25. discrete element model for predicting shear strength and degradation of rock joint by using compressive and tensile test data
26. DEM simulation of confining pressure effects on crack opening displacement in hydraulic fracturing10.1016/j.ijmst.2016.05.004 ↗
27. Zhang, S., Tang, S.J., Zhang, D.S., Fan, G.W., and Wang, Z. (2017). Determination of the Height of the Water-Conducting Fractured Zone in Difficult Geological Structures: A Case Study in Zhao Gu No. 1 Coal Seam. Sustainability, 9.10.3390/su9071077 ↗
28. Numerical simulation of damage and failure in brittle rocks using a modified rigid block spring method10.1016/j.compgeo.2014.10.012 ↗
29. A study on effect of seepage direction on permeability stress test10.1007/s13369-016-2215-2 ↗
30. Influence of stress and water pressure on the permeability of fissured sandstone under hydromechanical coupling10.1007/s10230-018-0540-2 ↗
31. The application of a modified Voronoi logic to brittle fracture modelling at the laboratory and field scale10.1016/j.ijrmms.2014.02.003 ↗
32. Gao, F.Q. (2013). Simulation of Failure Mechanisms Around Underground Coal Mine Openings Using Discrete Element Modelling. [Ph.D. Dissertation, Simon Fraser University].
33. Discrete element modeling of progressive failure in a wide coal roadway from water-rich roofs10.1016/j.coal.2016.10.010 ↗
34. Wang, Z. (2017). Study on Permeability Evolution Law of Overlying Strata under Ultra-Thick Seam Mining in Laosangou Coal Mine. [Master’s Thesis, China University of Mining and Technology].
35. Analysis of Rock Fracture Micro-Mechanism
36. Porosity and permeability characterization of coal: A micro-computed tomography study10.1016/j.coal.2015.10.001 ↗