An Energy-Based Approach for Fatigue Life Estimation of Welded Joints without Residual Stress through Thermal-Graphic Measurement
Source abstract
Abstract
The traditional methodologies for fatigue life assessment of welded joints strongly depend on geometries and surface characteristics, as well as time. In this paper, an energy-based approach, independent of structures though thermal-graphic measurement, was presented to predict life expectancy of welded joints, via limited number of tests. In order to eliminate the thermal elastic effect caused by the welding residual stress, annealing was first conducted on welded specimens. Both monotonic and cyclic tests for welded joints were implemented. Then, based on the thermal evolution of welded joints measured by the quantitative thermo-graphic method, an energy-based approach, taking the linear temperature evolution and the intrinsic dissipation into account, was employed on the fatigue life prediction of flat butt-welded joints. The estimated results showed good agreement with the experimental ones, and the energy tolerance to failure E c for different stress amplitudes was found to be constant.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Fire effects on concrete materials · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Hunan University of Technology, Zhuzhou 412007, China
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, China
Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7491 Trondheim, Norway
Funding
Natural Science Foundation of Hunan Province · China Postdoctoral Science Foundation · State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body
References (28)
Show source-provided references
1. Effect of weld toe geometry on fatigue life of lap fillet welded ultra-high strength steel joints10.1016/j.ijfatigue.2018.06.050 ↗
2. Fatigue behavior of butt welded joints in a high strength steel10.1016/j.proeng.2010.03.075 ↗
3. Evaluation on fatigue performance and fracture mechanism of laser welded TWIP steel joint based on evolution of microstructure and micromechanical properties10.1016/S1006-706X(16)30105-4 ↗
4. Estimation of fatigue S-N curves of welded joints using advanced probabilistic approach10.1016/j.ijfatigue.2016.12.032 ↗
5. Full-range S-N fatigue life evaluation method for welded bridge structures considering hot-spot and welding residual stress10.1061/(ASCE)BE.1943-5592.0000969 ↗
6. Numerical implementation for fatigue assessment of butt joint improved by high frequency mechanical impact treatment: A structural hot spot stress approach10.1016/j.ijfatigue.2016.07.008 ↗
7. Comparison of local stress based concepts- Effects of low- and high cycle fatigue and weld quality10.1016/j.engfailanal.2015.07.022 ↗
8. The effect of the local and global weld geometry as well as material defects on crack initiation and fatigue strength10.1016/j.engfracmech.2017.07.001 ↗
9. A method of fatigue prediction in notched and un-notched components10.1016/j.jmatprotec.2005.01.015 ↗
10. Fatigue assessment of welded joints under variable amplitude loading using a novel notch stress approach10.1016/j.ijfatigue.2016.12.031 ↗
11. An energy-based fatigue life prediction of a mining truck welded frame10.1007/s12206-016-0722-4 ↗
12. Application of the strain energy density approach in comparing different design solutions for improving the fatigue strength of load carrying shear welded joints10.1016/j.ijfatigue.2016.09.001 ↗
13. Fatigue behavior prediction of welded joints by using an integrated fracture mechanics approach10.1016/j.ijfatigue.2012.02.004 ↗
14. The use of the specific heat loss to analyze the low- and high-cycle fatigue behavior of plain and notched specimens made of a stainless steel10.1016/j.engfracmech.2011.06.010 ↗
15. Characterisation of steel welded joints by infrared thermographic methods10.1080/17686733.2013.874220 ↗
16. Damage monitoring in fracture mechanics by evaluation of the heat dissipated in the cyclic plastic zone ahead of the crack tip with thermal measurement10.1016/j.engfracmech.2017.06.017 ↗
17. Fatigue limit evaluation of metals using an infrared thermographic technique10.1016/S0167-6636(97)00047-1 ↗
18. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components10.1016/S0142-1123(99)00088-2 ↗
19. Quantitative thermographic methodology for fatigue life assessment in a multiscale energy dissipation framework10.1016/j.ijfatigue.2015.08.015 ↗
20. Quantitative thermographic methodology for fatigue assessment and stress measurement10.1016/j.ijfatigue.2010.07.004 ↗
21. Fatigue life prediction of high strength steel welded joints by energy approach10.1016/j.prostr.2016.06.270 ↗
22. Fatigue analysis of butt welded AH36 steel joints: Thermographic method and design S−N curve10.1016/j.marstruc.2009.03.001 ↗
23. An energy method for rapid evaluation of high-cycle fatigue parameters based on intrinsic dissipation10.1016/j.ijfatigue.2015.04.016 ↗
24. Rapid determination of fatigue failure based on temperature evaluation: Fully reversed bending load10.1016/j.ijfatigue.2009.07.015 ↗
25. Infrared image processing for the calorimetric analysis of fatigue phenomena10.1007/s11340-007-9092-2 ↗
26. Theoretical analysis, infrared and structural investigations of energy dissipation in metals under cyclic loading10.1016/j.msea.2006.02.462 ↗
27. Heat sources, energy storage and dissipation in high-strength steels: Experiments and modeling10.1016/j.euromechsol.2009.11.005 ↗
28. Energy-based approach for fatigue life prediction of pure copper10.1016/j.ijfatigue.2017.07.025 ↗