An Investigation on Base Metal Block Shear Strength of Ferritic Stainless Steel Welded Connection
Source abstract
Abstract
This study develops a finite element analysis model to predict the ultimate strength of the base metal block shear fracture based on previous experimental results and compares the experimental results with the analysis results to verify the effectiveness of the analysis model. This study also analyzed additional variables of the welding direction and weld length on the applied load to investigate the structural behaviors and fracture conditions. In addition, predicted strength according to the analysis results were compared with those by the current design equations, and the equations proposed by previous researchers. As a result, the design formula by the current design equations, such as Korea Building Code (KBC)/American Institute of Steel Construction (AISC) and European Code (EC3), and the equations proposed by Oosterhof and Driver underestimated the base metal block shear strength of ferritic stainless steel by up to 42%. Equations suggested by Topkaya and Lee et al. for carbon steel and austenitic stainless steel welded connections provided more accurate strength predictions, while they did not reflect the difference of material properties. Therefore, this study proposed a modified strength equation for ferritic stainless steel welded connection with base metal block shear fracture considering the stress triaxiality effect of the welded connection and the material properties of ferritic stainless steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Fire effects on concrete materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Architectural Engineering, Hanbat National University, 125, DongSeoDae-ro, Yuseong-Gu, Daejeon 34158, Korea
Funding
Human Resources Development of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Trade, industry & Energy
References (22)
Show source-provided references
1. American Society of Civil Engineers (ASCE) (2002). Specification for the Design of Cold-Formed Stainless Steel Structural Members, ASCE. SEI/ASCE-8-02.
2. Committee for Standardization (CEN) (2006). EN 1993-1-4, Eurocode 3 (EC3). Design of Steel Structures—Part 1.4: General Rules–Supplementary Rules for Stainless Steel, European Committee for Standardization (CEN). High Road.
3. SSBA (2006). Design Manual of Light-Weight Stainless Steel Structures, Stainless Steel Building Association of Japan (SSBA).
4. Australian Standard/New Zealand Standard (AS/NZS) (2001). Cold-Formed Stainless Steel Structures, AS/NZS. AS/NZS 4673.
5. Architectural Institute of Korea (AIK) (2016). Korea Building Code (KBC2016), AIK. (In Korean).
6. Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear10.1016/j.tws.2007.03.006 ↗
7. An Experimental Study on Behavior of Single Shear Bolted Connections with Thin-walled Stainless Steel
8. Ultimate strength of single shear bolted connections with cold-formed ferritic stainless steel10.1631/jzus.A1100316 ↗
9. Block Shear Strength of Cold-formed Austenitic Stainless Steel (304 Type) Welded Connection with Base Metal Fracture10.1016/j.tws.2019.04.045 ↗
10. Ferritic stainless steels in structural applications10.1016/j.tws.2014.03.014 ↗
11. Papavinasam, S. (2014). Corrosion Control in the Oil and Gas Industry, Elsevier Inc.. Chapter 3 Materials.10.1016/B978-0-12-397022-0.00003-0 ↗
12. Ultimate strength of austenitic stainless steel fillet-welded connections with weld metal fracture10.1016/j.tws.2017.03.008 ↗
13. Investigation on Ultimate Strength of STS304L Stainless Steel Welded Connection with Base Metal Fracture Using Finite Element Analysis10.1007/s13296-018-0072-4 ↗
14. Block shear failure of gusset plates with welded connection10.1016/j.engstruct.2006.04.003 ↗
15. Effects of connection geometry on block shear failure of welded lap plate connections10.1016/j.jcsr.2010.09.003 ↗
16. Influence of Microstructure Difference of Stainless Steels on the Strength and Fracture of Bolted Connections10.2355/isijinternational.53.365 ↗
17. Effective Shear Plane Model for Tear out and Block Shear Failure of Bolted Connections
18. Material and local buckling response of ferritic stainless steel sections10.1016/j.tws.2014.12.012 ↗
19. Buckling of ferritic stainless steel members under combined axial compression and bending10.1016/j.jcsr.2015.10.003 ↗
20. Web crippling design of cold-formed ferritic stainless steel unlipped channels with fastened flanges under end-two-flange loading condition10.1016/j.jcsr.2018.03.032 ↗
21. An Experimental Study on Block Shear Fracture of Base Metal in Ferritic Stainless Steel Welded Connection10.7781/kjoss.2016.28.5.303 ↗
22. American Institute of Steel Construction (AISC) (2016). Specification for Structural Steel Buildings, AISC.