journal article·2019-11-01Open access

Effect of Slot Opening Width on the Air-Gap Magnetic Field of a Direct Drive Permanent Magnet Motor

Yaofei Han, Shaofeng Chen, Caixia Gao, Mengzhen Gao, Jikai Si, Yihua Hu

Applied Sciences· Volume 9· Issue 21

Abstract

The direct drive permanent magnet motor (DDPMM) is a promising candidate for applications because of its high efficiency, high power density, and low maintenance costs. This study focused on the effect of slot opening width on the air-gap magnetic field of a DDPMM. An exact analytical model based on Fourier analysis was established to calculate the air-gap magnetic field. The analytical general solution of the air-gap magnetic field shows that the slot opening greatly affects the air-gap magnetic field distribution when the amount of the permanent magnet is constant. Then, the air-gap magnetic fields of the DDPMM with closed and open slots were compared at different positions. Furthermore, several finite-element models of motors composed of different numbers of unit motor were established based on the different slot opening widths to study the effect of slot opening width on the air-gap magnetic field. The results obtained using the finite element method verify that the slot opening width greatly affects the air-gap magnetic field.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electric Motor Design and Analysis · Magnetic Bearings and Levitation Dynamics · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Henan Engineering Research Center for the Control of Power Transmission and Conversion, Pingdingshan 467036, China

School of Electrical Engineering and Automation, Henan Polytechnic University, Jiaozuo 454000, China

College of Electric Engineering, Zhengzhou University, Zhengzhou 450001, China

Department of Electrical Engineering and Electronics, University of Liverpool, Liverpool L693BX, UK

Funding

Key Research and Development Projects of Henan Intelligent Transmission and Distribution and Power Conversion Engineering Research Center

References (15)

Show source-provided references
1. Salminen, P., Pyrhönen, J., and Libert, F. (2005, January 15–17). Torque ripple of permanent magnet machines with concentrated windings. Proceedings of the International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, Baiona, Spain.
2. Analytical modeling and finite element computation of radial vibration force in fractional-slot permanent magnet brushless machines10.1109/TIA.2010.2058078 ↗
3. Magnetic field analysis and inductances of brushless DC machines with surface-mounted magnets and non-overlapping stator windings10.1109/20.376463 ↗
4. Two-dimensional exact analytical solution of armature reaction field in slotted surface mounted PM radial flux synchronous machines10.1109/TMAG.2009.2021527 ↗
5. Influence of PWM on the proximity loss in permanent-magnet brushless AC machines10.1109/TIA.2009.2023488 ↗
6. Analytical prediction of eddy current loss in armature windings of permanent magnet brushless AC machines10.1109/TMAG.2010.2046885 ↗
7. Instantaneous magnetic field distribution in brushless permanent magnet DC motors, part I: Open-circuit field10.1109/20.195557 ↗
8. Instantaneous magnetic field distribution in brushless magnet DC motors, part III: Effect of stator slotting10.1109/20.195559 ↗
9. Analytical Prediction of the No-Load Operation Features of Tubular-Linear Permanent Magnet Synchronous Machines10.1109/TMAG.2015.2472988 ↗
10. Analytical Calculation and Experimental Verification of Cogging Torque and Optimal Point in Permanent Magnet Synchronous Motors
11. Analytical Model for Permanent Magnet Motor with Slotting Effect, Armature Reaction, and Ferromagnetic Material Property10.1109/TMAG.2015.2459036 ↗
12. Semi-analytical method research for non-load air gap field of surface alnico permanent magnet brushless motor
13. Semi–analytical approach with vector magnetic potential for permanent-magnet air-gap field of surface mounted stator slot
14. Using FE calculations and data-based system identification techniques to model the nonlinear behavior of PMSMs10.1109/TIE.2014.2303785 ↗
15. Characteristic analysis and verification of magnetic field modulated brushless double rotor machine10.1109/TIE.2014.2381159 ↗