Fragility Analysis of Concrete-Filled Steel Tubular Frame Structures with BRBs under Multiple Earthquakes Considering Strain Rate Effects
Source abstract
Abstract
The fragility of concrete-filled steel tubular (CFST) frame structures with buckling-restrained braces (BRBs) subjected to multiple earthquakes is studied in this paper. First, a fiber beam element model with rate-dependent concrete and steel material properties is developed for CFST members and, then, the effect of the strain rate on the seismic response of the CFST frame structure is investigated numerically. The influence of BRBs on the seismic response of the CFST frame structure is then comparatively analyzed. The seismic responses of the CFST frame structure with BRBs under single mainshocks and earthquake sequences are investigated, and the fragility curves are generated using probabilistic seismic demand analysis. The obtained roof displacement and inter-story drift ratio (ISDR) of the structure decreased by 10.2% and 6.9%, respectively, when obtained while considering the strain rate effect, compared with those obtained without consideration of the strain rate effect. BRBs can effectively improve the seismic performance of the CFST frame structure in that the maximum roof displacement and ISDR can be reduced by 45.1% and 43.9%, respectively. Compared with those under single mainshocks, the maximum roof displacement and ISDR of the structure with BRBs under earthquake sequences significantly increase. The fragility of the BRB structure under earthquake sequences is more severe than that under single mainshocks. Therefore, the influences of the strain rate effect and earthquake sequence should be considered to realistically evaluate the seismic fragility of CFST structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Seismic Performance and Analysis · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil Engineering, Shenyang Jianzhu University, Shenyang 110168, China
Guangdong Key Laboratory of Earthquake Engineering and Application Technology, Guangzhou University, Guangzhou 510006, China
Faculty of infrastructure Engineering, Dalian University of Technology, Dalian 116024, China
References (56)
Show source-provided references
1. Bai, Y., Wang, J., and Liu, Y. (2017). Thin-walled CFST columns for enhancing seismic collapse performance of high-rise steel frames. Appl. Sci., 7.10.3390/app7010053 ↗
2. Zhang, J., Li, Y., and Zheng, Y. (2018). Seismic damage investigation of spatial frames with steel beams connected to L-shaped concrete-filled steel tubular (CFST) columns. Appl. Sci., 8.10.3390/app8101713 ↗
3. Experimental study on a prefabricated lightweight concrete-filled steel tubular framework composite slab structure subjected to reversed cyclic loading10.3390/app9061264 ↗
4. Seismic demands on steel braced frame buildings with buckling-restrained braces10.1016/S0141-0296(02)00175-X ↗
5. Seismic response and performance of buckling-restrained braced frames10.1061/(ASCE)0733-9445(2007)133:9(1195) ↗
6. Experimental study on seismic performance of concrete-filled steel tabular frame-shear wall structure with buckling-resistant braces10.1002/tal.1155 ↗
7. Wu, Y., Song, W., and Zhao, W. (2018). An experimental study on dynamic mechanical properties of fiber-reinforced concrete under different strain rates. Appl. Sci., 8.10.3390/app8101904 ↗
8. Strength and energy absorption capabilities of plain concrete under dynamic and static loadings
9. Strain rate effect on structural steel under cyclic loading10.1061/(ASCE)0733-9399(1987)113:9(1292) ↗
10. Wakabayshi, M. (1980, January 8–13). Dynamic Loading Effects on the Structural Performance of Concrete and Steel Materials and Beams. Proceedings of the Seventh World Conference on Earthquake Engineering, Istanbul, Turkey.
11. Stress-strain behavior of reinforcing steel and concrete under seismic strain rates and low temperatures10.1007/BF02480594 ↗
12. Review of effects of loading rate on reinforced concrete10.1061/(ASCE)0733-9445(1991)117:12(3660) ↗
13. Review of strain rate effects for concrete in tension
14. Compressive behaviour of concrete at high strain rates10.1007/BF02472016 ↗
15. Bertero, V.V., Rea, D., and Mahin, S.A. (1973, January 25–29). Rate of Loading Effects on Uncracked and Repaired Reinforced Concrete Members. Proceedings of the Fifth World Conference on Earthquake Engineering, Rome, Italy.
16. Effects of strain rate on reinforced concrete structure under seismic loading10.1260/1369-4332.15.3.461 ↗
17. Experimental and numerical study on dynamic properties of RC beam10.1680/macr.12.00198 ↗
18. Experimental tests on reinforced concrete columns under multi-dimensional dynamic loadings10.1016/j.conbuildmat.2013.06.003 ↗
19. Experimental investigation on dynamic and quas-static behavior of low-rise reinforced concrete walls10.1002/eqe.2234 ↗
20. Influence of strain rate on the seismic response of RC structure10.1016/j.engstruct.2011.10.025 ↗
21. Experimental and numerical investigations on seismic responses of reinforced concrete structures considering strain rate effect10.1016/j.conbuildmat.2018.04.085 ↗
22. Luco, N., Bazzurro, P., and Cornell, C.A. (2004, January 1–6). Dynamic Versus Static Computation of the Residual Capacity of a Mainshock-Damaged Building to Withstand an Aftershock. Proceedings of the 13th World Conference on Earthquake Engineering, Auckland, New Zealand.
23. Effects of multiple earthquakes on inelastic structural response10.1016/j.engstruct.2013.05.041 ↗
24. Influence of modeling assumptions and aftershock hazard level in the seismic response of post-mainshock steel framed buildings10.1016/j.engstruct.2017.02.074 ↗
25. Seismic response of steel frames under repeated earthquake ground motions10.1016/j.engstruct.2004.08.005 ↗
26. Duerr, K. (2014). Seismic Vulnerability Assessment and Retrofit Optimization of Non-Code Conforming Buildings with Consideration of Mainshock-Aftershock Earthquake. [Master’s Thesis, The University of British Columbia].
27. Inelastic seismic demand estimation of wood-frame houses subjected to mainshock-aftershock sequences10.1007/s10518-013-9534-4 ↗
28. Impact of aftershocks and uncertainties on the seismic evaluation of non-ductile reinforced concrete frame buildings10.1016/j.engstruct.2015.05.039 ↗
29. Loss estimation of steel buildings to earthquake mainshock–aftershock sequences10.1016/j.strusafe.2016.03.002 ↗
30. Earthquake risk assessment of building structures10.1016/S0951-8320(01)00105-3 ↗
31. Seismic fragility of RC structural walls: Displacement approach10.1061/(ASCE)0733-9445(2001)127:2(219) ↗
32. Ryu, H., Luco, N., Uma, S., and Liel, A. (2011, January 14–16). Developing Fragilities for Mainshock-Damaged Structures through Incremental Dynamic Analysis. Proceedings of the 9th Pacific Conference on Earthquake Engineering, Auckland, New Zealand.
33. Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations10.1061/(ASCE)0733-9399(2002)128:10(1024) ↗
34. Seismic fragility analysis of reinforced concrete bridges with chloride induced corrosion subjected to spatially varying ground motions10.1142/S0219455415500108 ↗
35. Seismic fragility analyses of sea-crossing cable-stayed bridges subjected to multi-support ground motions on offshore sites10.1016/j.engstruct.2018.03.066 ↗
36. Performance evaluation and damage assessment of steel frame buildings under main shock-aftershock earthquake sequences10.1002/eqe.667 ↗
37. Performance of degrading reinforced concrete frame systems under the Tohoku and Christchurch earthquake sequences10.1080/13632469.2014.923796 ↗
38. Framework of aftershock fragility assessment–case studies: Older California reinforced concrete building frames10.1002/eqe.2599 ↗
39. Collapse fragility of steel structures subjected to earthquake mainshock-aftershock sequences10.1061/(ASCE)ST.1943-541X.0001019 ↗
40. National Standards of the People’s Republic of China (2010). Code for Design of Concrete Structures.
41. Clough, R.W., and Johnson, S.B. (, January October). Effect of stiffness degradation on earthquake ductility requirements. Proceedings of the Japan Earthquake Engineering Symposium, Tokyo, Japan. Available online: https://link.springer.com/article/10.1007/s11803-006-0631-0.
42. Han, L.H. (2007). Theory and Practice of Concrete Filled Steel Tubular Structure, Science Press. [3rd ed.].
43. Numerical simulation of dynamic response for steel frame structures subjected to blast load10.1007/s12209-008-0090-y ↗
44. Effects of axial load on nonlinear response of RC columns subjected to lateral impact load: Ship-pier collision10.1016/j.engfailanal.2018.04.055 ↗
45. Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading10.1016/j.engstruct.2018.12.014 ↗
46. Influence of strain rates and loading histories on the compressive damage behaviour of concrete10.1680/macr.10.00119 ↗
47. Fiber beam element model for reinforced concrete structures considering strain rate effects
48. Dynamic properties of concrete in direct tension10.1016/j.cemconres.2006.03.003 ↗
49. Experimental investigation of steel structure with innovative H-type steel unbuckling braces10.1002/tal.1108 ↗
50. A Comparison of the Krawinkler and scissors models for including beam-column joint deformations in the analysis of moment-resisting steel frames10.62913/engj.v43i1.868 ↗
51. Gutenberg, B., and Richter, C.F. (2013). Seismicity of the Earth and Associated Phenomena, Princeton University Press. [2nd ed.].
52. Inelastic displacement ratios for SDOF structures subjected to repeated earthquakes10.1016/j.engstruct.2009.07.002 ↗
53. Mackie, K., and Stojadinović, B. (2005). Fragility Basis for California Highway Overpass Bridge Seismic Decision Making, Pacific Earthquake Engineering Research Center, University of California. PEER Report No. 2005/02.
54. The probabilistic basis for the 2000SAC/FEMA steel moment frame guidelines10.1061/(ASCE)0733-9445(2002)128:4(526) ↗
55. National Standards of the People’s Republic of China (2010). Code for Seismic Design of Buildings.
56. China Association for Engineering Construction Standardization (2008). Code for Design of Steel-Concrete Hybrid Structures for High-Rise Building.