Mechanisms of formation of Al4Cu9 during mechanical alloying: An experimental study
Source abstract
Abstract
Abstract In spite of its complex structure, the Cu-rich γ1-Al4Cu9 compound is frequently observed in Al–Cu processing. In order to better understand the intriguing formation of this compound, a thorough experimental study of Al–25 at.% Cu mixtures produced by mechanical alloying (MA) was performed. Strong morphological changes are found to occur for moderate milling times. γ1-Al4Cu9 is formed during the early milling steps (5.5 h), its volume fraction increasing continuously with milling time, while the equilibrium θ-Al2Cu expected for this composition is detected only for longer times (90 h). Whereas the early formation of γ1 suggests that its nucleation should occur at Al/Cu interfaces, direct visualization reveals the presence of γ1 crystallites within Cu-rich zones. The thermal instability of MA-formed γ1-Al4Cu9 is evidenced, this phase evolving towards θ-Al2Cu at temperatures lower than those predicted for equilibrium conditions. These observations indicate that γ1-Al4Cu9 may be able to form through non-thermally activated mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Davis · 1993
2. Solid-state synthesis reaction between Al and Cu powders during ball milling10.1016/0167-577X(95)00236-7 ↗
3. Copper- and cobalt-alloys made by mechanical alloying10.2320/matertrans1989.36.218 ↗
4. Solid-state reactions between Cu and Al during mechanical alloying and heat treatment10.1016/S0925-8388(00)01094-X ↗
5. Solid state reactions in nanometer scaled diffusion couples prepared using high energy ball milling10.1016/S0921-5093(00)01388-5 ↗
6. Formation of γ-Cu67Al33 alloy by mechanical alloying10.1016/S0925-8388(98)00830-5 ↗
7. The formation of metastable phases by mechanical alloying in the aluminium and copper system10.1007/BF02650245 ↗
8. High resolution transmission electron microscopy study on the development of nanostructured precipitates in Al–Cu obtained by mechanical alloying10.1016/j.matchemphys.2011.11.007 ↗
9. Interfacial reactions on annealing Cu/Al multilayer thin films10.1063/1.355183 ↗
10. Enhanced mechanical properties of friction-stir-welded dissimilar Al–Cu joint by intermetallic compounds10.1016/j.msea.2010.05.061 ↗
11. Formation of ultra-fine copper grains in copper–clad aluminium wire10.1016/j.scriptamat.2010.05.010 ↗
12. Production of free standing Cu–Al intermetallics by cathodic arc plasma treatment10.1016/j.intermet.2011.07.022 ↗
13. Intermetallic phase formation in diffusion-bonded Cu/Al laminates10.1007/s10853-010-5093-0 ↗
14. Brittleness study of intermetallic (Cu, Al) layers in copper-clad aluminium thin wires10.1016/j.msea.2011.05.077 ↗
15. Interfacial microstructures and thermodynamics of thermosonic Cu-wire bonding10.1109/LED.2011.2161749 ↗
16. Multiscale study of interfacial intermetallic compounds in a dissimilar Al 6082–T6/Cu friction-stir weld10.1007/s11661-012-1277-3 ↗
17. Crystallographic computing system JANA2006: general features10.1515/zkri-2014-1737 ↗
18. Ordering and structural vacancies in non-stoichiometric Cu–Al γ-brasses10.1107/S0108768191005694 ↗
19. Point defects and formation driving forces of complex metallic alloys: atomic-scale study of Al4Cu910.1016/j.intermet.2013.11.023 ↗
20. Loureiro · J. Alloys Compd. · 2014 · 615 · S55910.1016/j.jallcom.2013.12.071 ↗
21. First-principles study of atomic ordering in bcc Cu–Al10.1088/0965-0393/19/1/015008 ↗
22. A transition state between s.r.o. and l.r.o. in the β′ Cu–Al martensite and its relation with the mechanical properties10.1016/0036-9748(81)90001-6 ↗
23. Initial stages of ordering obtained by tempering of the disordered martensitic phase of Cu–Al alloys10.1016/S1359-6462(97)00065-1 ↗
24. First-principles study of Al–Cu energetics and consequences on athermal formation of Cu-rich compounds10.1103/PhysRevB.90.214104 ↗