journal article·2022-07-20Open access

Energy Prediction and Energy Management in Kinetic Energy-Harvesting Wireless Sensors Network for Industry 4.0

Alex Mouapi, Hatem Mrad

Applied Sciences· Volume 12· Issue 14

Abstract

Real-time control and monitoring are some of the main goals of Industry 4.0. To meet these requirements, sensors are needed at every step of the production process. Wireless sensors (WS) are better suited due to their flexibility but are limited in energy. In this work, kinetic energy harvesting using piezoelectric technologies are considered to ensure the energy autonomy of a Wireless Sensor Network (WSN). First, unlike most existing works, this paper focuses on WSN rather than a single WS since the control of the entirety of most industrial processes requires several WSs. The solution proposed here is based on deep learning of the harvestable power signals at each sensor deployed on the monitoring system. Specifically, vibration measurements were performed at 12 locations on an ore crushing mill in a mine. From there, a mechanical–electrical conversion model considering the system’s dynamics was set up to evaluate the power profile each of the WSs can harvest. Considering that the harvestable power has many peaks due to the different operating states of the engine, we first proposed a Predictor of the Harvestable Power from Vibrations (PHPV). Using a large database, compared to a state-of-the-art predictor, the Predictor of the Harvestable Energy from vibrations (PHEV) allows for significantly reducing the Root Mean Square Error (RMSE). More specifically, the lowest reduction achieved for RSME ranged from 9.4 μW (with PHEV) to 5.9 μW (with PHPV). A decrease in RMSE ranging from 18.45 to 4 μW was obtained for another measurement point. Since harvest rates differ from one location to another, a Hierarchical Energy-Balancing Protocol (HEBP) is proposed to maximize the number of WS capable of transmitting information about the system’s state, thus avoiding an interruption of the network coverage. In the HEBP, it is envisaged that some WSs, besides transmitting data, will supply other nodes with an energy deficit to allow them to communicate information about their location. For a minimum packet size of up to 1100 bits, the energy autonomy of all the WSs is ensured, unlike only 66% of the nodes with the previous protocols.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Energy Harvesting in Wireless Networks · Wireless Power Transfer Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Industrial Electronics at the Cegep of Abitibi-Temiscamingue, 425 BlVd. du Collège, Rouyn-Noranda, QC J9X 5E5, Canada

School of Engineering, University of Quebec in Abitibi-Temiscamingue, Rouyn-Noranda, QC J9X 5E4, Canada

Funding

Mitacs Canada

References (58)

Show source-provided references
1. The internet of things-based decision support system for information processing in intelligent manufacturing using data mining technology10.1016/j.ymssp.2020.106630 ↗
2. Zhang, S., and Zhang, H. (2012, January 15–17). A review of wireless sensor networks and its applications. Proceedings of the 2012 IEEE International Conference on Automation and Logistics, Zhengzhou, China.10.1109/ICAL.2012.6308240 ↗
3. Towards network lifetime enhancement of resource constrained iot devices in heterogeneous wireless sensor networks10.3390/s20154156 ↗
4. Prospective efficient ambient energy harvesting sources for iot-equipped sensor applications10.3390/electronics9091345 ↗
5. Energy harvesting using piezoelectric materials: Case of random vibrations10.1007/s10832-007-9051-4 ↗
6. A cloud-based monitoring system for performance assessment of industrial plants10.1021/acs.iecr.9b06638 ↗
7. Piezoelectric Energy Harvesting Prediction and Efficient Management for Industrial Wireless Sensor10.3390/app10238486 ↗
8. Hybrid energy harvesting system under the electromagnetic induced vibrations with non-rigid ground connection10.1016/j.ymssp.2021.108198 ↗
9. Free space optical cooperative communications via an energy harvesting harvest-store-use relay10.1109/TWC.2020.3003811 ↗
10. Energy harvesting vibration sources for microsystems applications10.1088/0957-0233/17/12/R01 ↗
11. Scopes, challenges and approaches of energy harvesting for wireless sensor nodes in machine condition monitoring systems: A review10.1016/j.measurement.2021.109856 ↗
12. A piezoelectric vibration based generator for wireless electronics10.1088/0964-1726/13/5/018 ↗
13. A study of low level vibrations as a power source for wireless sensor nodes10.1016/S0140-3664(02)00248-7 ↗
14. Cantilevered piezoelectric micro generator design issues and application to the mining locomotive10.3390/en13010063 ↗
15. Piezoelectric micro generator design and characterization for self-supplying industrial wireless sensor node10.1016/j.memori.2022.100002 ↗
16. Achieve frequency-self-tracking energy harvesting using a passively adaptive cantilever beam10.1016/j.ymssp.2021.107672 ↗
17. Piezoelectric energy harvesting solutions10.3390/s140304755 ↗
18. A vibration-based MEMS piezoelectric energy harvester and power conditioning circuit10.3390/s140203323 ↗
19. A Sensor-less Self-tuning Resonance System for Piezoelectric Broadband Vibration Energy Harvesting10.1109/TIE.2020.2975457 ↗
20. Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation10.3390/electronics9010079 ↗
21. Nonlinear piezoelectricity and damping in partially-covered piezoelectric cantilever with self-sensing synchronized switch damping on inductor circuit10.1016/j.ymssp.2020.106867 ↗
22. Improved design and analysis of self-powered synchronized switch interface circuit for piezoelectric energy harvesting systems10.1109/TIE.2011.2167116 ↗
23. Li, Z., Chen, Z., Wan, Q., Kuai, Q., Liang, J., Mok, P.K., and Zeng, X. (2020, January 12–14). An Energy Harvesting System with Reconfigurable Piezoelectric Energy Harvester Array for IoT Applications. Proceedings of the 2020 IEEE International Symposium on Circuits and Systems (ISCAS), Seville, Spain.10.1109/ISCAS45731.2020.9180965 ↗
24. Autonomous energy management system achieving piezoelectric energy harvesting in wireless sensors10.1007/s11036-019-01303-w ↗
25. A study on piezoelectric energy-harvesting wireless sensor networks deployed in a weak vibration environment10.1109/JSEN.2017.2747122 ↗
26. Adaptive data and verified message disjoint security routing for gathering big data in energy harvesting networks10.1016/j.jpdc.2019.08.012 ↗
27. An experimental study of ultra-low power wireless sensor-based autonomous energy harvesting system10.1063/1.4997274 ↗
28. An energy-efficient cluster head selection scheme for energy-harvesting wireless sensor networks10.3390/s20010187 ↗
29. A novel efficient clustering protocol for energy harvesting in wireless sensor networks10.1007/s11276-020-02351-x ↗
30. Renewable Energy Harvesting Schemes in Wireless Sensor Networks: A Survey10.1016/j.inffus.2020.07.005 ↗
31. An application-specific protocol architecture for wireless microsensor networks10.1109/TWC.2002.804190 ↗
32. Energy optimized micro genetic algorithm based LEACH protocol for WSN10.1007/s11276-020-02435-8 ↗
33. A Novel Adaptive Cluster Based Routing Protocol for Energy-Harvesting Wireless Sensor Networks10.3390/s22041564 ↗
34. Engineering, O. (2020, March 15). ACC101, ACC102A, ACC103, ACC301A, ACC310, ACC320 Accelerometers. Available online: https://assets.omega.com/manuals/M5097.pdf.
35. State of art: Piezoelectric vibration energy harvesters10.1016/j.matpr.2017.01.124 ↗
36. Synthesis, Characterization and Development of Energy Harvesting Techniques Incorporated with Antennas: A Review Study10.3390/s20102772 ↗
37. Magnetic and Electric Energy Harvesting Technologies in Power Grids: A Review10.3390/s20051496 ↗
38. Linear electromechanical model of ionic polymer transducers-Part I: Model Development10.1177/1045389X03034976 ↗
39. A hybrid energy harvesting design for on-body Internet-of-Things (IoT) networks10.3390/s20020407 ↗
40. Interference-aware routing for difficult wireless sensor network environment with SWIPT10.3390/s19183978 ↗
41. Mathworks (2020, May 18). Piezo Stack. Available online: https://www.mathworks.com/help/physmod/elec/ref/piezostack.html.
42. MIDE (2018, March 30). QuickPack Packaged Piezoelectric Actuators and Sensors. Available online: https://www.mouser.com/datasheet/2/606/mide%20technology_quickpack-actuator-sensor-datashee-1214998.pdf.
43. Piorno, J.R., Bergonzini, C., Atienza, D., and Rosing, T.S. (2009, January 17–20). Prediction and management in energy harvested wireless sensor nodes. Proceedings of the 2009 1st International Conference on Wireless Communication, Vehicular Technology, Information Theory and Aerospace & Electronic Systems Technology, Aalborg, Denmark.
44. A novel solar energy predictor for communicating sensors10.1049/iet-com.2018.5244 ↗
45. Power management in energy harvesting sensor networks10.1145/1274858.1274870 ↗
46. Machine learning based prediction of piezoelectric energy harvesting from wake galloping10.1016/j.ymssp.2021.107876 ↗
47. Prediction by exponentially weighted moving averages and related methods10.1111/j.2517-6161.1961.tb00424.x ↗
48. Investigation on crack failure of helical gear system of the gearbox in wind turbine: Mesh stiffness calculation and vibration characteristics recognition10.1016/j.oceaneng.2022.110972 ↗
49. Martínez, J.-F., Garcí, A.-B., Corredor, I., López, L., Hernández, V., and Dasilva, A. (2007, January 14–17). QoS in wireless sensor networks: Survey and approach. Proceedings of the 2007 Euro American Conference on Telematics and Information Systems, Faro, Portugal.10.1145/1352694.1352715 ↗
50. Siddiqui, A.M., Musavian, L., and Ni, Q. (2015, January 8–12). Energy efficiency optimization with energy harvesting using harvest-use approach. Proceedings of the 2015 IEEE International Conference on Communication Workshop (ICCW), London, UK.10.1109/ICCW.2015.7247471 ↗
51. Energy-Neutral and QoS-Aware Protocol in Wireless Sensor Networks for Health Monitoring of Hoisting Systems10.1109/TII.2020.2969218 ↗
52. An estimation of sensor energy consumption10.2528/PIERB08122303 ↗
53. A comparative study of LPWAN technologies for large-scale IoT deployment10.1016/j.icte.2017.12.005 ↗
54. Energy dissipation model for wireless sensor networks: A survey
55. Semtech (2021, October 12). SX1280/SX1281 Long Range, Low Power, 2.4 GHz Transceiver with Ranging Capability. Available online: https://semtech.my.salesforce.com/sfc/p/E0000000JelG/a/2R000000HoCW/8EVYKPLcthcKCB_cKzApAc6Xf6tAHtn9.UKcOh7SNmg?__hstc=212684107.a2777854172938a3600e24e6b3622154.1640973435576.1640973435576.1640973435576.1&__hssc=212684107.1.1640973435577&__hsfp=3233074646.
56. A survey–Energy harvesting sources and techniques for internet of things devices10.1016/j.matpr.2020.04.115 ↗
57. Analytical and Experimental Performance Analysis of Enhanced Wake-Up Receivers Based on Low-Power Base-Band Amplifiers10.3390/s22062169 ↗
58. Orser (2022, March 15). CONGA: THE WORLD’S FIRST 42 FOOT DIAMETER 28 MW GEARLESS SAG MILL. Available online: https://library.e.abb.com/public/e23fc5fb2ee49033c125793d0056bce5/CONGA%20-%20THE%20WORLDS%20FIRST%2042%20FOOT%20DIAMETER%2028%20MW%20GEARLESS%20SAG%20MILL.pdf.