Experimental Research of Symmetrical Airfoil Piezoelectric Energy Harvester Excited by Vortex-Induced Flutter Coupling
Source abstract
Abstract
In order to solve the problem of self-energy supply of vehicle-mounted micro-sensors, bridge detection and some other low-power electronic devices in their working state, a vortex-induced flutter composite nonlinear piezoelectric energy harvester (VFPEH) with symmetrical airfoils on both sides of a cylindrical bluff body is designed. The VFPEH consists of a cantilever beam, a cylindrical bluff body connected to the free end of the cantilever beam, and two airfoil components symmetrically fixed at both ends of the shaft, which enables coupling between vortex-induced vibration and flutter. The airfoil symmetrically arranged on both sides of the cylindrical bluff body induces the cantilever beam to produce bending and torsional composite vibrations at high wind velocities, realizing energy harvest in the two degrees of freedom motion direction, which can effectively improve the output power of the energy harvester. Based on a wind tunnel experimental platform, the effect of key parameters matching impedance and the diameter of the cylindrical bluff body on the output performance of the VFPEH is investigated, together with the output performance of the classical vortex-induced energy harvester (VEH), the flutter energy harvester (FEH) and the VFPEH. The experimental results show that for the VFPEH under a combination of vortex-induced vibrations and flutter vibrations has a better output performance than the VEH and the FEH when using the same size. The coupling of vortex-induced vibration and flutter can reduce the start-up wind velocity of the VFPEH and expand the wind velocity range of the high output power of the VFPEH. The VFPEH has a better output performance at the cylindrical bluff body diameter of 30 mm and a load resistance of 140 kΩ. When the wind velocity range is 2 m/s–15 m/s, the maximum output power of the VFPEH is 6.47 mW, which is 129.4 times and 24.9 times of the maximum output power of the VEH (0.05 mW) and FEH (0.26 mW), respectively.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative Energy Harvesting Technologies · Fluid Dynamics and Vibration Analysis · Vibration Control and Rheological Fluids
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Power Engineering, Zhengzhou University, Zhengzhou 450001, China
Funding
Key Research Development and Promotion Project
References (47)
Show source-provided references
1. A Comprehensive Review on the State-of-the-art of Piezoelectric Energy Harvesting10.1016/j.nanoen.2020.105567 ↗
2. High-Performance Piezoelectric Energy Harvesters and Their Applications10.1016/j.joule.2018.03.011 ↗
3. Micro Blood Pressure Energy Harvester for Intracardiac Pacemaker10.1109/JMEMS.2013.2282623 ↗
4. Hossain, I.Z., Khan, A., and Hossain, G. (2022). A Piezoelectric Smart Textile for Energy Harvesting and Wearable Self-Powered Sensors. Energies, 15.10.3390/en15155541 ↗
5. Energy Harvesting Technologies in Roadways and Bridges for Different Applications—A Comprehensive Review
6. Theoretical and experimental study of an elect-romagnetic vibration energy harvester10.1080/00150193.2019.1658031 ↗
7. Harvesting of River Flow Energy for Wireless Sensor Network Technology
8. Design and Optimisation of an Underfloor Energy Harvesting System10.1016/j.sna.2018.12.002 ↗
9. A Self-tunable Wind Energy Harvester Utilising a Piezoelectric Cantilever Beam with Bluff Body under Transverse Galloping for Field Deployment10.1016/j.enconman.2021.114559 ↗
10. Investigations on the Performance of Piezoelectric-flexoelectric Energy Harvesters10.1016/j.apenergy.2021.116611 ↗
11. A Two-dimensional Electromagnetic Vibration Energy Harvester with Variable Stiffness10.1016/j.apenergy.2022.119650 ↗
12. Micro electrostatic energy harvester with both broad bandwidth and high normalized power density10.1016/j.apenergy.2017.12.053 ↗
13. No-Wear Vibration Energy Harvester Based on a Triboelectric Mechanism10.1007/s11664-021-09208-9 ↗
14. A Vibration Energy Harvester Using AlN Piezoelectric Cantilever Array10.1016/j.mee.2015.07.006 ↗
15. A Hybrid Piezo-dielectric Wind Energy Harvester for High-performance Vortex-induced Vibration Energy Harvesting10.1016/j.ymssp.2020.107212 ↗
16. Comprehensive Experimental Study on Bluff Body Shapes for Vortex-induced Vibration Piezoelectric Energy Harvesting Mechanisms
17. Passively Adaptive Wind Energy Harvester Featuring a Double-airfoil Bluff Body with Adjustable Attack Angles10.1016/j.ymssp.2022.109814 ↗
18. Fluttering Conditions of an Energy Harvester for Autonomous Powering
19. Dynamic Response Mechanism of the Galloping Energy Harvester under Fluctuating Wind Conditions10.1016/j.ymssp.2021.108410 ↗
20. Modeling and Experimental Study of a Piezoelectric Energy Harvester from Vortex Shedding-induced Vibration10.1016/j.enconman.2018.02.026 ↗
21. Orientation of Bluff Body for Designing Efficient Energy Harvesters from Vortex-induced Vibrations
22. Dual Serial Vortex-induced Energy Harvesting System for Enhanced Energy Harvesting10.1063/1.5038884 ↗
23. The Performance of a Self-excited Fluidic Energy Harvester10.1088/0964-1726/21/2/025007 ↗
24. Energy Harvester Based on the Synchronization Phenomenon of a Circular Cylinder
25. Low Velocity Water Flow Energy Harvesting Using Vortex Induced Vibration and Galloping
26. Vortex Shedding Induced Energy Harvesting from Piezoelectric Materials in Heating, Ventilation and Air Conditioning Flows10.1088/0964-1726/21/4/045003 ↗
27. Study on Wind Energy Harvesting Effect of a Vehicle-Mounted Piezo-Electromagnetic Hybrid Energy Harvester10.1109/ACCESS.2020.3023649 ↗
28. Development of an Indoor Airflow Energy Harvesting System for Building Environment Monitoring10.3390/en7052985 ↗
29. A T-shaped Piezoelectric Cantilever for Fluid Energy Harvesting
30. Power Extraction from Aeroelastic Limit Cycle Oscillations10.1016/j.jfluidstructs.2011.02.003 ↗
31. Parametric design study of an aeroelastic flutter energy harvester
32. Ambient Vibration Energy Harvesters: A Review on Nonlinear Techniques for Performance Enhancement10.1016/j.ijengsci.2018.02.003 ↗
33. Enhancement of the Performance of a Hybrid Nonlinear Vibration Energy Harvester Based on Piezoelectric and Electromagnetic Transductions10.1088/0964-1726/23/7/075024 ↗
34. Review of Vibration-based Electromagnetic–piezoelectric Hybrid Energy Harvesters10.1002/er.6253 ↗
35. Nonlinear Magnetic-coupled Flutter-based Aeroelastic Energy Harvester: Modeling, Simulation and Experimental Verification
36. A Wearable Energy Harvester Unit Using Piezoelectric-electromagnetic Hybrid Technique10.1016/j.sna.2017.02.026 ↗
37. There Is Plenty of Room inside a Bluff Body: A Hybrid Piezoelectric and Electromagnetic Wind Energy Harvester10.3390/en15166097 ↗
38. Hybrid Wind Energy Scavenging by Coupling Vortex-induced Vibrations and Galloping10.1016/j.enconman.2020.112835 ↗
39. Enhancing Performance of a Piezoelectric Energy Harvester System for Concurrent Flutter and Vortex -induced Vibration10.3390/en13123101 ↗
40. Atrah, A.B., Ab-Rahman, M.S., Salleh, H., Nuawi, M.Z., Nor, M.J.M., and Jamaludin, N.B. (2017). Karman Vortex Creation Using Cylinder for Flutter Energy Harvester Device. Micromachines, 8.10.3390/mi8070227 ↗
41. Design and Modeling of a Magnetic-Coupling Monostable Piezoelectric Energy Harvester Under Vortex-Induced Vibration10.1109/ACCESS.2020.3000526 ↗
42. Influence of Vehicle Body Vibration Induced by Road Excitation on the Performance of a Vehicle-mounted Piezoelectric-electromagnetic Hybrid Energy Harvester10.1088/1361-665X/abf41f ↗
43. Influence and Optimization of the Electrodes Position in a Piezoelectric Energy Harvesting Flag10.1016/j.jsv.2015.01.010 ↗
44. Development of a piezoelectric polymer energy harvestin-g flag
45. Enhanced Aeroelastic Energy Harvesting by Exploiting Combined Nonlinearities: Theory and Experiment10.1088/0964-1726/20/9/094007 ↗
46. Modeling and Analysis of Piezoaeroelastic Energy Harvesters10.1007/s11071-011-0035-1 ↗
47. Hybrid Piezoelectric-inductive Flow Energy Harvesting and Dimensionless Electroaeroelastic Analysis for Scaling