Liquid to Fused Deposition Modeling (L-FDM)—A Revolution in Application Chemicals to 3D Printing Technology—Mechanical and Functional Properties
Source abstract
Abstract
A novel L-FDM technique that builds upon the fundamentals of the FDM additive manufacturing process has been developed. It includes a mechanism that directly incorporates a chemical substance and alters polymer fibers throughout the fine process. This method eliminates the need for additional extrusion operations and compounding equipment to introduce chemical additives and solvents. This advancement opens up new opportunities for printers to be used in chemical labs to test new or known chemical substances. The paper outlines the technological assumptions, potential applications, and practical examples of direct filament modification using the L-FDM technique. The modifications made to the mechanical properties of the printed objects were confirmed through thermal analysis techniques (DSC), water contact angle measurements, electron microscopy (SEM-EDS), and mechanical analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · 3D Printing in Biomedical Research · Modular Robots and Swarm Intelligence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre for Advanced Technologies, Adam Mickiewicz University in Poznań, 10 Uniwersytetu Poznańskiego, 61-614 Poznań, Poland
Faculty of Chemistry, Adam Mickiewicz University in Poznań, 8 Uniwersytetu Poznańskiego, 61-614 Poznań, Poland
Funding
National Centre for Research and Development
References (28)
Show source-provided references
1. A review on recent advancements in fused deposition modeling10.1016/j.matpr.2019.12.036 ↗
2. Mechanical characterization of 3D-printed polymers
3. A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters10.1515/eng-2021-0063 ↗
4. Özen, A., Auhl, D., Völlmecke, C., Kiendl, J., and Abali, B.E. (2021). Optimization of Manufacturing Parameters and Tensile Specimen Geometry for Fused Deposition Modeling (FDM) 3D-Printed PETG. Materials, 14.10.3390/ma14102556 ↗
5. A review on PLA with different fillers used as a filament in 3D printing10.1016/j.matpr.2021.09.413 ↗
6. Wang, J., Yang, B., Lin, X., Gao, L., Liu, T., Lu, Y., and Wang, R. (2020). Research of TPU Materials for 3D Printing Aiming at Non-Pneumatic Tires by FDM Method. Polymers, 12.10.3390/polym12112492 ↗
7. Wickramasinghe, S., Do, T., and Tran, P. (2020). FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments. Polymers, 12.10.3390/polym12071529 ↗
8. Expanding the applicability of FDM-type technologies through materials development10.1108/RPJ-12-2014-0165 ↗
9. Moisture-induced changes in the mechanical behavior of 3D printed polymers10.1016/j.jcomc.2022.100243 ↗
10. Swelling and hydrolytic degradation of poly(d,l-lactic acid) in aqueous solutions10.1016/j.polymdegradstab.2005.01.060 ↗
11. Swelling kinetics of polymers10.1080/00222349208215453 ↗
12. Quantitative analyses of products from chemical recycling of polylactide (PLA) by alcoholysis with various alcohols and their applications as healable lactide-based polyurethanes10.1016/j.saa.2021.119684 ↗
13. Solvothermal Alcoholysis Routes for Recycling Polylactide Waste as Lactic Acid Esters10.1021/acscatal.6b01009 ↗
14. Silane crosslinking of poly(lactic acid): The effect of simultaneous hydrolytic degradation10.3144/expresspolymlett.2015.101 ↗
15. Rheological analysis as a means for determining the silane crosslink network structure and content in crosslinked polymer composites10.1016/j.polymertesting.2009.05.006 ↗
16. The effect of alcoholic solutions on the thermomechanical properties of immersed poly(lactic acid) films10.1002/app.53489 ↗
17. Enhanced Performance of Polylactide Film via Simultaneous Biaxial Stretching and Silane Coupling Agent as a Thermal Shrinkable Film
18. The measurement of the crystallinity of polymers by DSC10.1016/S0032-3861(02)00235-5 ↗
19. Thermal and Morphological Properties of Poly (Lactic Acid)/Nanocellulose Nanocomposites10.1016/j.proche.2016.03.086 ↗
20. Aliotta, L., Sciara, L.M., Cinelli, P., Canesi, I., and Lazzeri, A. (2022). Improvement of the PLA Crystallinity and Heat Distortion Temperature Optimizing the Content of Nucleating Agents and the Injection Molding Cycle Time. Polymers, 14.10.3390/polym14050977 ↗
21. Analysis of non-isothermal crystallization during cooling and reorganization during heating of isotactic polypropylene by fast scanning DSC10.1016/j.tca.2014.11.006 ↗
22. Effect of temperature history during additive manufacturing on crystalline morphology of PEEK
23. Concurrent solvent induced crystallization and hydrolytic degradation of PLA by water-ethanol solutions10.1016/j.polymer.2016.07.018 ↗
24. Quantitatively unravel the effect of chain length heterogeneity on polymer crystallization using discrete oligo l-lactide10.1016/j.polymer.2021.123746 ↗
25. Recent developments and applications of protective silicone coatings: A review of PDMS functional materials10.1016/j.porgcoat.2017.05.012 ↗
26. From Hydrophobic to Superhydrophobic and Superhydrophilic Siloxanes by Thermal Treatment10.1021/la503583c ↗
27. Superhydrophobic sponge with the rod-spherical microstructure via palygorskite-catalyzed hydrolysis and condensation of vinyltriethoxysilane for oil-water separation10.1016/j.clay.2020.105872 ↗
28. Influence of liquid media on the craze initiation in amorphous polylactide10.1016/j.polymer.2018.03.023 ↗