Atomistic simulations of surface cross-slip nucleation in face-centered cubic nickel and copper
Source abstract
Abstract
Abstract In this manuscript, embedded atom potentials are used to determine the various core structures of glide screw-character dislocations intersecting free surfaces at right and inclined angles in face-centered cubic Ni and Cu. It is shown that the negative constriction forms at free surfaces under certain conditions. The role of various factors affecting the formation of negative constriction at the free surface, negative constriction energy, ledge annihilation and screw dislocation rotation due to Lothe’s forces are discussed. The activation energy for surface cross-slip nucleation when the screw dislocation intersects the free surfaces at right angles, in the absence of ledge annihilation forces, is shown to be 0.05 eV in Ni and 0.09 eV in Cu. The activation-energy values obtained via the nudged elastic band method are significantly lower than the activation energy for cross-slip at attractive forest dislocation intersections in these materials. The present results are expected to be useful in understanding the mechanical behavior of micron-sized pillars under pure tension and compression.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Escaig B. In: Rosenfield AR, Hahn GT, Bement AL, Jr., Jaffee RI, editors. Proceedings of the Battelle Colloquium on Dislocation Dynamics. New York: McGraw-Hill; 1968. p. 655.
2. Rao · Phil Mag A · 1999 · 79 · 116710.1080/01418619908210354 ↗
3. Bonneville · Acta Metall · 1979 · 27 · 147710.1016/0001-6160(79)90170-6 ↗
4. Rasmussen · Phys Rev B · 1997 · 56 · 297710.1103/PhysRevB.56.2977 ↗
5. Rao · Philos Mag · 2009 · 89 · 335110.1080/14786430903286201 ↗
6. Rao · Acta Mater · 2010 · 58 · 554710.1016/j.actamat.2010.06.005 ↗
7. Rao · Acta Mater · 2011 · 59 · 713510.1016/j.actamat.2011.08.029 ↗
8. Rao S, Dimiduk DM, El-Awady J, Parthasarathy TA, Uchic MD, Woodward C. Philos Mag; submitted for publication.
9. Plimpton · J Comp Phys · 1995 · 117 · 110.1006/jcph.1995.1039 ↗
10. Stroh · Phil Mag · 1959 · 3 · 62510.1080/14786435808565804 ↗
11. Angelo · Modell Simul Mater Sci Eng · 1995 · 3 · 28910.1088/0965-0393/3/3/001 ↗
12. Mishin · Acta Mater · 2004 · 52 · 145110.1016/j.actamat.2003.11.026 ↗
13. Mishin · Phys Rev B · 2001 · 63 · 22410610.1103/PhysRevB.63.224106 ↗
14. Stukowski · Model Simul Mater Sci Eng · 2010 · 18 · 08500110.1088/0965-0393/18/8/085001 ↗
15. Hazzledine · Philos Mag · 1975 · 32 · 8110.1080/14786437508222807 ↗
16. Hazzledine PM, Shaibani SJ. In: Gifkins RC, editor. 6th International conference on strength of metals and alloys (ICSMA), vol. 1. Oxford: Pergamon Press; 1982. p. 45.10.1016/B978-1-4832-8423-1.50012-2 ↗
17. Hazzledine PM. In: Bilby BA et al., editors. Fundamentals of deformation and fracture. Cambridge: Cambridge University Press; 1985. p. 385.
18. Henkelman · J Chem Phys · 2000 · 113 · 997810.1063/1.1323224 ↗
19. Uchic · Science · 2004 · 305 · 98610.1126/science.1098993 ↗
20. Greer · Acta Mater · 2005 · 53 · 182110.1016/j.actamat.2004.12.031 ↗
21. Lohne · Philos Mag · 1972 · 25 · 52910.1080/14786437208228890 ↗
22. Minari · Philos Mag · 1975 · 31 · 27510.1080/14786437508228931 ↗
23. George · Cryst Latt Defects · 1973 · 4 · 29
24. Kuhlmann-Wilsdorf · Appl Phys Lett · 1962 · 1 · 3310.1063/1.1753693 ↗
25. Kopenaal · Acta Met · 1963 · 11 · 53710.1016/0001-6160(63)90088-9 ↗
26. Desvaux · Z fur Metall · 1963 · 3 · 206
27. Lohne · Phys Status Solidi (a) · 1974 · 25 · 70910.1002/pssa.2210250241 ↗