journal article·2022-09-06Open access

An Electromagnetic Circuit Design to Improve a Multi-Stage Coil-Gun’s Energy Conversion Efficiency

Seonmyeong Kim, Jinho Kim

Applied Sciences· Volume 12· Issue 18

Abstract

We present in this paper a method of improving a coil gun circuit’s energy efficiency and acceleration performance. Particularly, the improvement was performed by designing a solenoid coil and capacitance for projectile velocity enhancement in a multi-stage coil gun, based on simulations and experiments. A projectile decelerates in coil guns when passing through the solenoid coil’s center by being subjugated to a force opposing the launch direction. Thus, we achieved the efficient distribution of the electromagnetic power delivered from the circuit to the projectile by adjusting the capacitance according to the solenoid coil’s shape. This produced a current shape suitable for projectile acceleration, consequently enhancing its performance. Designing the coil using 1.3 mm diameter copper wires, among the coils using copper wires of various diameters, to increase the number of turns and reduce the capacitance improved the energy efficiency while enhancing the acceleration performance. Finally, each stage’s measured and simulated velocities in the coil gun were analyzed and compared. Accordingly, we arrived at an efficient design method for multi-stage coil gun systems.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electromagnetic Launch and Propulsion Technology · Combustion and Detonation Processes · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Yeungnam University, Gyeongsan-si 38541, Korea

Funding

Korean government (MSIT)

References (12)

Show source-provided references
1. Electromagnetic Launching System as an Alternative to Non-Destructive Sonic Wave Generation for Steel Bar Length Determination10.1109/TLA.2021.9443073 ↗
2. Kaye, R., Turman, B., Aubuchon, M., Lamppa, D., Mann, G., Reuth, E.V., Fulton, K., Malejko, G., Magnotti, P., and Nguyen, D. (2007–22, January 17). Induction coilgun for EM mortar. Proceedings of the 2007 16th IEEE International Pulsed Power Conference, Albuquerque, NM, USA.10.1109/PPPS.2007.4652542 ↗
3. Basic principles of coaxial launch technology10.1109/TMAG.1984.1063050 ↗
4. Kaye, R.J. (2004, January 25–28). Operational requirements and issues for coilgun EM launchers. Proceedings of the 2004 12th Symposium on Electromagnetic Launch Technology, Snowbird, UT, USA.
5. Jacob, G., Shabu, M., Mathew, M., Shaji, S., Sreekala, P., and Thomas, J. (2021, January 18–19). A Study on Improving Single Stage Coil Gun. Proceedings of the 2021 Fourth International Conference on Microelectronics, Signals & Systems (ICMSS), Kollam, India.10.1109/ICMSS53060.2021.9673619 ↗
6. Parameter Study on the Design of solenoid to Enhance the Velocity of Coilgun10.4283/JKMS.2015.25.3.087 ↗
7. Rivas-Camacho, J.L., Ponce-Silva, M., and Olivares-Peregrino, V.H. (2016, January 20–23). Experimental results concerning to the effects of the initial position of the projectile on the conversion efficiency of a reluctance accelerator. Proceedings of the 2016 13th International Conference on Power Electronics (CIEP), Guanajuato, Mexico.10.1109/CIEP.2016.7530737 ↗
8. A simple unified physical model for a reluctance accelerator10.1109/TMAG.2005.856320 ↗
9. Fast finite-element solver for a reluctance mass accelerator10.1109/TMAG.2006.880395 ↗
10. Korytkowski, K., and Starzyński, J. (2021, January 15–17). Coilgun Design by Simulation. Proceedings of the 2021 22nd International Conference on Computational Problems of Electrical Engineering (CPEE), Hrádek u Sušice, Czech Republic.10.1109/CPEE54040.2021.9585193 ↗
11. Ram, R., and Thomas, M.J. (2022). Developmental Studies on a Two-Stage Coilgun. IEEE Trans. Plasma Sci., 1–8.10.1109/TPS.2022.3159563 ↗
12. Multimission electromagnetic launcher10.1109/TMAG.2008.2008551 ↗