Study of Local Fatigue Methods (TCD, N-SIF, and ESED) on Notches and Defects Related to Numerical Efficiency
Source abstract
Abstract
The fatigue strength of structural components is strongly affected by notches and imperfections. Both can be treated similarly, as local notch fatigue strength methods can also be applied to interior defects. Even though Murakami’s √area approach is commonly used in the threshold-based fatigue design of single imperfections, advanced concepts such as the Theory of Critical Distances (TCD), Notch Stress Intensity Factors (N-SIF), or Elastic Strain Energy Density (ESED) methods provide additional insight into the local fatigue strength distribution of irregularly shaped defects under varying uniaxial load vectors. The latter methods are based on the evaluation of the elastic stress field in the vicinity of the notch for each single load vector. Thus, this work provides numerically efficient methods to assess the local fatigue strength by means of TCD, N-SIF, and ESED, targeting the minimization of the required load case count, optimization of stress field evaluation data points, and utilization of multi-processing. Furthermore, the Peak Stress Method (PSM) is adapted for large opening angles, as in the case of globular defects. In detail, two numerical strategies are devised and comprehensively evaluated, either using a sub-case-based stress evaluation of the defect vicinity with an unchanged mesh pattern and varying load vector on the exterior model region with optimized load angle stepping or by the invocation of stress and strain tensor transformation equations to derive load angle-dependent result superposition while leaving the initial mesh unaltered. Both methods provide numerically efficient fatigue post-processing, as the mesh in the evaluated defect region is retained for varying load vectors. The key functions of the fatigue strength assessment, such as the evaluation of appropriate planar notch radius and determination of notch opening angle for the discretized imperfections, are presented. Although the presented numerical methods apply to planar simulation studies, the basic methodology can be easily expanded toward spatial fatigue assessment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Probabilistic and Robust Engineering Design · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Christian Doppler Laboratory for Manufacturing Process Based Component Design, Chair of Mechanical Engineering, Montanuniversität Leoben, Franz-Josef-Strasse 18, 8700 Leoben, Austria
Chair of Mechanical Engineering, Montanuniversität Leoben, Franz-Josef-Strasse 18, 8700 Leoben, Austria
Funding
Austrian Federal Ministry for Digital and Economic Affairs · National Foundation for Research, Technology, and Development
References (98)
Show source-provided references
1. Generalized Application of Neuber’s Rule10.1520/JTE11613J ↗
2. Radaj, D., Sonsino, C.M., and Fricke, W. (2006). Fatigue Assessment of Welded Joints by Local Approaches, Woodhead. [2nd ed.].10.1533/9781845691882 ↗
3. Method of effective stress for fatigue: Part I—A general theory10.1016/j.ijfatigue.2011.09.018 ↗
4. Method of effective stress for fatigue: Part II—Applications to V-notches and seam welds10.1016/j.ijfatigue.2011.09.016 ↗
5. Recent developments in local concepts of fatigue assessment of welded joints10.1016/j.ijfatigue.2008.05.019 ↗
6. Strain-based approach to fatigue crack initiation and propagation in welded steel joints with arbitrary notch shape10.1016/j.ijfatigue.2013.03.006 ↗
7. Effect of cyclic plastic strain on fatigue crack growth10.1016/j.ijfatigue.2015.06.014 ↗
8. Stress distributions for V-shaped notches under tensile and bending loads10.1111/j.1460-2695.1997.tb00314.x ↗
9. Cracks and notches: Analogies and differences of the relevant stress distributions and practical consequences in fatigue limit predictions10.1016/S0142-1123(00)00107-9 ↗
10. Notch Sensitivity and Defect Sensitivity under Fatigue Loading: Two Sides of the Same Medal10.1023/A:1007686727207 ↗
11. A unifying approach to fatigue design in presence of defects and notches subject to uniaxial loading10.1051/matecconf/20141209001 ↗
12. Schuscha, M., Horvath, M., Leitner, M., and Stoschka, M. (2019). Notch Stress Intensity Factor (NSIF)-Based Fatigue Design to Assess Cast Steel Porosity and Related Artificially Generated Imperfections. Metals, 9.10.3390/met9101097 ↗
13. Numerical crack growth study on porosity afflicted cast steel specimens10.3221/IGF-ESIS.48.08 ↗
14. The theory of critical distances10.1016/j.engfracmech.2007.04.007 ↗
15. The theory of critical distances: A review of its applications in fatigue10.1016/j.engfracmech.2006.12.004 ↗
16. The Peak Stress Method for Fatigue Strength Assessment of welded joints with weld toe or weld root failures10.1007/BF03321304 ↗
17. Fatigue strength assessment of partial and full-penetration steel and aluminium butt-welded joints according to the peak stress method10.1111/ffe.12342 ↗
18. A notch stress intensity approach applied to fatigue life predictions of welded joints with different local toe geometry10.1046/j.1460-2695.2003.00586.x ↗
19. Some Expressions for the Strain Energy in a Finite Volume Surrounding the Root of Blunt V-Notches10.1007/s10704-005-3943-6 ↗
20. Control volumes and strain energy density under small and large scale yielding due to tension and torsion loading10.1111/j.1460-2695.2007.01206.x ↗
21. NSIFs estimation based on the averaged strain energy density under in-plane mixed mode loading10.1016/j.prostr.2016.06.230 ↗
22. Strain energy-and stress-based approaches revisited in notch fatigue of ductile steels10.1051/matecconf/201816514009 ↗
23. Statistical analysis of defects for fatigue strength prediction and quality control of materials10.1046/j.1460-2695.1998.00104.x ↗
24. Material defects as the basis of fatigue design10.1016/j.ijfatigue.2011.12.001 ↗
25. Defects as a root cause of fatigue failure of metallic components. I: Basic aspects10.1016/j.engfailanal.2019.01.055 ↗
26. Relationship between Defect Size and Fatigue Life Distributions in Al-7 Pct Si-Mg Alloy Castings10.1007/s11661-009-9847-8 ↗
27. Aigner, R., Leitner, M., Stoschka, M., Hannesschläger, C., Wabro, T., and Ehart, R. (2018). Modification of a Defect-Based Fatigue Assessment Model for Al-Si-Cu Cast Alloys. Materials, 11.10.3390/ma11122546 ↗
28. A probabilistic Kitagawa-Takahashi diagram for fatigue strength assessment of cast aluminium alloys10.1016/j.msea.2018.12.108 ↗
29. Aigner, R., Pomberger, S., Leitner, M., and Stoschka, M. (2019). On the Statistical Size Effect of Cast Aluminium. Materials, 12.10.3390/ma12101578 ↗
30. Theory of Critical Distances versus Gradient Mechanics in modelling the transition from the short to long crack regime at the fatigue limit10.1111/ffe.12066 ↗
31. A unifying approach to estimate the high-cycle fatigue strength of notched components subjected to both uniaxial and multiaxial cyclic loadings10.1111/j.1460-2695.2004.00759.x ↗
32. Fatigue Crack Propagation of Short Cracks10.1115/1.3443647 ↗
33. Kitagawa, H., and Takahashi, S. (1976, January 6–20). Applicability of fracture mechanics to very small cracks or the cracks in the early stage. Proceedings of the Second International Conference on the Mechanical Behaviour of Materials, Boston, MA, USA.
34. Modified Kitagawa–Takahashi diagram accounting for finite notch depths10.1016/j.ijfatigue.2014.07.007 ↗
35. A novel formulation of the theory of critical distances to estimate lifetime of notched components in the medium-cycle fatigue regime10.1111/j.1460-2695.2007.01122.x ↗
36. A simple approximate expression for finite life fatigue behaviour in the presence of ‘crack-like’ or ‘blunt’ notches10.1111/j.1460-2695.2011.01612.x ↗
37. A critical distance/plane method to estimate finite life of notched components under variable amplitude uniaxial/multiaxial fatigue loading10.1016/j.ijfatigue.2011.11.015 ↗
38. Horvath, M. (2022, January 20–23). Fatigue Life Assessment of Imperfective Cast Steel Components in the Medium-Cycle Regime by Stress- And Energy-Based Concepts. Proceedings of the 6th International Conference on Structural Integrity and Durability, ICSID 2022, Dubrovnik, Croatia.
39. Stress Singularities Resulting from Various Boundary Conditions in Angular Corners of Plates in Extension10.1115/1.4010553 ↗
40. Significance of the elastic peak stress evaluated by FE analyses at the point of singularity of sharp V-notched components10.1111/j.1460-2695.2006.01084.x ↗
41. Assessment of tensile fatigue limit of notches using sharp and coarse linear elastic finite element models10.1016/j.tafmec.2016.06.001 ↗
42. Rapid evaluation of notch stress intensity factors using the peak stress method: Comparison of commercial finite element codes for a range of mesh patterns
43. Multiaxial variable amplitude fatigue strength assessment of steel welded joints using the peak stress method10.1016/j.ijfatigue.2022.107089 ↗
44. The Peak Stress Method for fatigue lifetime assessment of fillet-welded attachments in steel subjected to variable amplitude in-phase multiaxial local stresses10.1016/j.ijfatigue.2022.107482 ↗
45. A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches10.1007/BF00018497 ↗
46. A notch intensity factor approach to the stress analysis of welds10.1046/j.1460-2695.1998.00097.x ↗
47. A generalized stress intensity factor to be applied to rounded V-shaped notches10.1016/j.ijsolstr.2005.03.007 ↗
48. From Neuber’s Elementary Volume to Kitagawa and Atzori’s Diagrams: An Interpretation Based on Local Energy10.1007/s10704-005-4393-x ↗
49. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches10.1023/A:1013595930617 ↗
50. State-of-the-art review on extended stress intensity factor concepts10.1111/ffe.12120 ↗
51. State-of-the-art review on the local strain energy density concept and its relation to the J-integral and peak stress method10.1111/ffe.12231 ↗
52. Averaged strain energy density evaluated rapidly from the singular peak stresses by FEM: Cracked components under mixed-mode (I+II) loading10.1016/j.tafmec.2015.08.001 ↗
53. Plastic notch stress intensity factors for large V-shaped notches under mixed load conditions10.1023/A:1007633612060 ↗
54. Plastic notch stress intensity factors for pointed V-notches under antiplane shear loading10.1007/s10704-008-9260-0 ↗
55. The Equivalent Strain Energy Density approach re-formulated and applied to sharp V-shaped notches under localized and generalized plasticity10.1046/j.1460-2695.2002.00543.x ↗
56. Strain energy-based evaluations of plastic notch stress intensity factors at pointed V-notches under tension10.1016/j.engfracmech.2011.07.005 ↗
57. Local strain energy density approach to assess the fatigue strength of sharp and blunt V-notches in cast steel10.1016/j.ijfatigue.2019.105334 ↗
58. Comparison of different one-parameter damage laws and local stress-strain approaches in multiaxial fatigue life assessment of notched components10.1016/j.ijfatigue.2021.106405 ↗
59. Probabilistic fatigue life prediction of notched components using strain energy density approach10.1016/j.engfailanal.2021.105375 ↗
60. On the applicability of the cumulative strain energy density for notch fatigue analysis under multiaxial loading10.1016/j.tafmec.2022.103405 ↗
61. On the use of the cumulative strain energy density for fatigue life assessment in advanced high-strength steels10.1016/j.ijfatigue.2022.107121 ↗
62. A critical elastic strain energy storage-based concept for characterizing crack propagation in elastic–plastic materials10.1016/j.engfracmech.2022.108335 ↗
63. Multiaxial fatigue life prediction for metals by means of an improved strain energy density-based critical plane criterion10.1016/j.euromechsol.2021.104353 ↗
64. Multiaxial fatigue life prediction model based on an improved strain energy density criterion10.1016/j.ijpvp.2022.104724 ↗
65. Puri, G. (2011). Python Scripts for Abaqus: Learn by Example, GB Books, Incr.. [1st ed.].
66. Fatigue strength study based on geometric shape of bulk defects in cast steel10.1016/j.ijfatigue.2022.107082 ↗
67. Gross, D., Hauger, W., Schröder, J., and Wall, W.A. (2007). Technische Mechanik, Springer.10.1007/978-3-540-70763-9 ↗
68. Kaszynski, A., Derrick, J., Correia, D., and Addy, D. (2022, November 21). pyansys/pymapdl: V0.60.3. Available online: https://zenodo.org/record/5726008#.Y-SbTi9By3A.
69. Encyclopedia of Mathematics (2022, November 21). Beta-Distribution. Available online: http://encyclopediaofmath.org/index.php?title=Beta-distribution&oldid=46045.
70. Gupta, A.K., and Nadarajah, S. (2004). Handbook of Beta Distribution and its Applications, Marcel Dekker.10.1201/9781482276596 ↗
71. Altair (2022, November 21). HyperWorks: 2022.1. Available online: https://www.altair.com/hyperworks/.
72. Nussbaumer, A., and Grigoriou, V. (2016, January 10–15). Round robin on local stress evaluation for fatigue by various FEM software: XIII-2650-19-R1. Proceedings of the 69th International Institute for Welding (IIW) Annual Assembly and International Conference, Melbourne, Australia. 17p.
73. Altair (2022, November 21). HyperMesh: 2022.1. Available online: https://www.altair.de/hypermesh/.
74. Altair (2022, November 21). HyperView: 2022.1. Available online: https://www.altair.de/hyperview/.
75. Altair (2022, November 21). Tcl/Tk Commands: 8.5.9. Available online: https://2021.help.altair.com/2021/hwdesktop/hwd/topics/reference/tcl/tcl_tk_syntax_r.htm.
76. Jones, K., and Welch, B. (2003). Practical Programming in Tcl and Tk, Prentice Hall. [4th ed.].
77. Ousterhout, J.K. (2010). Tcl and the Tk Toolkit, Addison-Wesley.
78. (2022, November 21). VecTcL: 0.3. Available online: https://github.com/auriocus/VecTcl.
79. Altair (2022, November 21). Compose: 2022.1. Available online: https://www.altair.com/compose.
80. (2022, November 21). OpenMatrix: 1.0.10. Available online: https://github.com/OpenMatrixLanguage/OpenMatrix.
81. Altair (2022, November 21). Scripting Guide for the OpenMatrix Language: 2022.1. Available online: https://2021.help.altair.com/2021.2/compose/business/en_us/topics/language_guides/language_guide_intro_header_c.htm.
82. Altair (2022, November 21). Use OML Function in HyperWorks Products: 2022.1. Available online: https://2021.help.altair.com/2021.2/compose/business/en_us/topics/compose/using_oml_functions_in_hyperworks_products_r.htm#using_oml_functions_in_hyperworks_products_r.
83. Altair (2022, November 21). Templex Reference: 2022.1. Available online: https://2021.help.altair.com/2021/hwdesktop/hwd/topics/reference/templex/templex_overview_r.htm.
84. Altair (2022, November 21). Object Hierarchy: 2022.1. Overview of Object Hierarchy for HyperView, HyperGraph, HyperWorks Desktop, MotionView, MediaView and TextView. Available online: https://2021.help.altair.com/2021/hwdesktop/hwd/topics/reference/tcl/object_hierarchy_r.htm.
85. (2022, November 21). Python 3.11.0 Documentation. Available online: https://docs.python.org/3/.
86. Hellmann, D. (2017). The Python 3 Standard Library by Example, Addison-Wesley.
87. Gorelick, M., and Ozsvald, I. (2020). High Performance Python: Practical Performant Programming for Humans, O’Reilly. [2nd ed.].
88. Brownlee, J. (2022). Python Multiprocessing Jump-Start: Develop Parallel Programs, Side-Step the GIL, and Use All CPU Cores, Super Fast Python Pty. Ltd.
89. Altair (2022, November 21). Compose-Usage Options: 2022.1. Business Edition. Available online: https://www.altair.com/compose-usage-options/.
90. The HDF Group (2022, November 21). HDF5: 1.10.9. Available online: https://portal.hdfgroup.org/display/HDF5/HDF5.
91. Schroeder, W. (2006). The Visualization Toolkit: An Object-Oriented Approach to 3D Graphics, Kitware. [4th ed.].10.1016/B978-012387582-2/50003-4 ↗
92. Sullivan, B., Kaszynski, A., Koyama, T., Deak, A., Favelier, G., Jones, J., Chiu, P., Mologni, R., and Larson, E. (2023). pyvista/pyvista: Release Notes-v0.37.0, Zenodo.
93. Manfredo, P.D.C. (2016). Differential Geometry of Curves and Surfaces, Revised, Dover Publications Inc.. [2nd ed.].
94. Halimi, O., Raviv, D., Aflalo, Y., and Kimmel, R. (2019). Processing, Analyzing and Learning of Images, Shapes, and Forms: Part 2, Elsevier.
95. Batchelor, P. (2022, November 21). [vtkusers] Computing Curvature of a Surface. Available online: https://public.kitware.com/pipermail/vtkusers/2002-July/012198.html.
96. Fortune, S. (2003, January 8–10). Restricted delaunay triangulations and normal cycle. Proceedings of the Nineteenth Conference on Computational Geometry—SCG ‘03. The Nineteenth Conference on Computational Geometry, San Diego, CA, USA.
97. VTK (2022, November 21). vtkCurvatures Class Reference: 9.2.20221001. Available online: https://vtk.org/doc/nightly/html/classvtkCurvatures.html.
98. Carlson, K., Ou, S., Harin, R.A., and Beckermann, C. (2022, January 7–11). Analysis of ASTM X-ray shrinkage rating for steel castings. Proceedings of the 54th SFSA Technical and Operating Conference, Chicago, IL, USA.