journal article·2023-10-06Open access

Evolution Characteristics of Plastic Zone in Jointed Rock Mass of High-Temperature Hydraulic Tunnel

Kangbin Li, Haibo Jiang, Gang Wei, Pengfei Xiang

Applied Sciences· Volume 13· Issue 19

Abstract

The evolution characteristics and the extent of the plastic zone in rock mass can reflect the failure characteristics and destruction degree of a hydraulic tunnel. In this research, we derived the equation of a plastic zone range based on a gateway-like structure high-temperature tunnel through a theoretical analysis. On-site monitoring and discrete element model simulation were combined to analyze the temperature field law and plastic zone evolution characteristics of the jointed rock mass at high temperatures. The results show that the joints affect the temperature field variation in rock mass, and the vertical and horizontal joint groups pose significantly greater influence than the inclined joint group on temperature field. The sensitivity of the joint internal friction angle and thermal expansion coefficient to the range of the plastic zone is relatively small. Under various joint spacings, the influence of horizontal and inclined joint groups on the plastic zone morphology decreases, while the vertical joint group exhibits an incremental influence on the plastic zone morphology. Similar to the influence of the temperature field, the vertical and horizontal joint groups have a significantly greater influence on the plastic zone range than the inclined joint group. Under various rock mass temperatures, the plastic zone in rock mass results in the occurrence of uneven expansions along the direction of the joint dip angle, which changes the potential failure direction of rock mass and increases the potential destruction degree of rock mass, whereas it exhibits a smaller uniform expansion perpendicular to the joint dip angle, and the boundary of the plastic zone coincides with the joint surface, relatively hindering the potential destruction degree of rock mass. The research results of this study have certain reference values for the stability control of jointed rock mass in high-temperature hydraulic tunnels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Rock Mechanics and Modeling · Tunneling and Rock Mechanics · Landslides and related hazards

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Water Conservancy & Architectural Engineering, Shihezi University, Shihezi 832003, China

College of Hydraulic and Civil Engineering, Xinjiang Agriculture University, Urumqi 830052, China

Department of Civil Engineering, Hangzhou City University, Hangzhou 310015, China

College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China

Department of Architectural Engineering, Zhejiang Tongji Vocational College of Science and Technology, Hangzhou 311200, China

Funding

National Natural Science Foundation of China · Regional Innovation Guidance Plan project of the XPCC · Science and technology plan project of Zhejiang Provincial Department of Water Resources

References (35)

Show source-provided references
1. Theoretical analysis on distribution pattern of plastic zone in surrounding rock of high-gas-coal roadway10.1155/2021/6684243 ↗
2. Research on detection technology for deep tunnel surrounding rock loose circle and numerical simulation analysis
3. Liu, H.T., Guo, L.F., and Zhao, X.D. (2020). Expansionary evolution characteristics of plastic zone in rock and coal mass ahead of excavation face and the mechanism of coal and gas outburst. Energies, 13.10.3390/en13040984 ↗
4. Lining support optimization design of a deep-buried tunnel in consideration of the broken rock zone support
5. Elastic-softening-plasticity around a borehole: An analytical and experimental study10.1007/s00603-018-1650-7 ↗
6. Boundary equation of plastic zone in roadway surrounding rocks considering supporting effect and its application
7. General shapes and criterion for surrounding rock mass plastic zone of round roadway
8. Proposed solution for the ground reaction of non-circular tunnels in an elastic-perfectly plastic rock mass10.1016/j.compgeo.2019.103354 ↗
9. Elastoplastic analysis of cracked surrounding rocks in deep circular openings
10. Dilation angle variations in plastic zone around tunnels in rocks-constant or variable dilation parameter10.1007/s11771-018-3935-0 ↗
11. Damage evolution of heterogeneous rocks under uniaxial compression based on distinct element method10.1007/s00603-018-1689-5 ↗
12. Effect of fracture heterogeneity on rock mass stability in a highly heterogeneous underground roadway10.1007/s00603-019-01887-5 ↗
13. Study on Stability and Plastic Zone Distribution of Tunnel with Thin Carbonaceous Slate at Different Dip Angles10.1155/2021/6345879 ↗
14. D-P Yield Criterion Based Elastoplastic Solution for a Deep-buried and Pressured Circular Tunnel Considering Seepage Effect
15. Jiang, H.B., Sun, H.L., and Shi, K.B. (2022). Stability analysis of the surrounding rock-lining structure in deep-buried hydraulic tunnels having seepage effect. Sustainability, 14.10.3390/su142416586 ↗
16. Analytical and numerical study of the effect of water pressure on the mechanical response of cylindrical lined tunnels in elastic and elasto-plastic porous media10.1016/j.ijrmms.2008.09.009 ↗
17. Thermal effects on the physical properties of limestones from the Yucatan Peninsula10.1016/j.ijrmms.2014.12.010 ↗
18. Influence of Temperature on Crack Initiation and Propagation in Granite10.1061/(ASCE)GM.1943-5622.0001182 ↗
19. Load-bearing characteristics of surrounding rock of hydraulic tunnels under high temperature and hydraulic pressure conditions using coupled thermo-hydro-mechanical-damage numerical model
20. Modelling of thermo-mechanical effects in a rock quarry wall induced by near-surface temperature fluctuations10.1016/j.ijrmms.2020.104440 ↗
21. Cai, X.H., and Cai, Y.P. (2004). Structural Stress Analysis of the Hydraulic Pressure Tunnel, China Water Power Press. [1st ed.].
22. Filed test of temperature field of the surrounding rocks of high temperature in the Gonggerer diversion tunnel in Xinjiang
23. Wu, J.L. (2001). Mechanics of Elasticity, Higher Education Press. [1st ed.].
24. Xu, Z.Y. (2007). Rock Mechanics, China Water Power Press. [3rd ed.].
25. Ren, J.X., Zhang, X.D., Yang, S.S., and Feng, G.R. (2013). Rock Mechanics, China University of Mining and Technology Press. [1st ed.].
26. Study on the characteristics and distribution laws of plastic zone induced by deep-buried high-geostress hydraulic tunnelling in jointed rock mass
27. Xu, Z.L. (2013). A Concise Course of Elastic Mechanics, Higher Education Press. [4th ed.].
28. Shi, C. (2016). Block Discrete Element Numerical Simulation Techniques and Engineering Applications, China Architecture and Building Press. [1st ed.].
29. Hou, X.B. (2019). Research on Thermal-Mechanical-Damage Strain Softening Model and Numerical Simulation of Rock in Underground Cavern. [Master’s Thesis, Shihezi University].
30. Realization method of discrete element numerical simulation of large number of non-persistent jointed rock mass
31. Discrete element calculation of surrounding rock mass stability of underground cavern group
32. Grain-scale numerical simulation of crystalline rock fracturing using soundless cracking demolition agents for in-situ preconditioning10.1016/j.compgeo.2022.105187 ↗
33. Behaviour of underground large caverns using 3DEC numerical modeling: A case study
34. Cheng, Y.M. (2017). Stability Analysis of High and Steep Bedding Rockslopebased on Discrete Element Strength Reduction Method. [Master’s Thesis, China University of Geosciences Beijing].
35. Controlling principles of surrounding rock in soft and broken roadway based on the distribution pattern of plastic zone