journal article·2019-05-23Open access

Dynamic Response Enhancement and Fault Protection of Boost Converter-Fed Brushless DC Motor in Aerospace Applications

Wei Wang, Jingwen Wang

Applied Sciences· Volume 9· Issue 10

Abstract

The permanent magnet (PM) brushless DC (BLDC) machine has been widely used in various applications due to its high reliability and simplicity. In aerospace applications, the requirements of its dynamic acceleration characteristic and fault protection capability have further increased. This paper proposes an optimized inverter topology composed of a boost converter, two protective power switches, and a three-phase full bridge for the dynamic response improvement and fault protection capability enhancement of PM BLDC machines. The corresponding drive logic, control method, and protection strategy are designed to develop a drive system for an aeronautical fuel pump. The response performance is significantly improved in handling under-voltage and over-rated conditions by utilizing the boost converter during different processes, and the protection capability is enhanced to deal with over-voltage and over-current fault isolation. A boost converter-fed BLDC pump system prototype is built and tested. It is concluded that the simulation and experiment results verify the rationality and validity of the proposed method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Multilevel Inverters and Converters · Electric Motor Design and Analysis · Advanced DC-DC Converters

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical Engineering, Southeast University, Sipailou 2#, Nanjing 210096, China

Department of Information Engineering, Ordos Institute of Technology, Kangbashi District, Ordos 017000, China

Funding

Research Projects of Inner Mongolia Autonomous Region · Scientific Research Projects of Ordos Institute of Technology

References (24)

Show source-provided references
1. Xia, C.L. (2012). Permanent Magnet Brushless DC Motor Drives and Controls, Science Press.10.1002/9781118188347 ↗
2. Permanent magnet brushless dc motor and its control
3. Jones, R.I. (1999, January 9). The more electric aircraft: The past and the future?. Proceedings of the IEE Colloquium on Electrical Machines and Systems for the More Electric Aircraft, London, UK.10.1049/ic:19990830 ↗
4. Electrical monitoring for fault detection in an EMA10.1109/MAES.2010.5463950 ↗
5. Power electronics and motor drives recent progress and perspective10.1109/TIE.2008.2002726 ↗
6. Motor drive technologies for the power-by-wire (PBW) program: Options, trends and tradeoffs part.1 motors and controllers10.1109/62.473411 ↗
7. NURBS-Based Feature Modeling and Trajectory Planning for Ram Motion of Servo Mechanical Presses
8. Pellegrino, G., Jahns, T.M., Bianchi, N., Soong, W.L., and Cupertino, F. (2016). The Rediscovery of Synchronous Reluctance and Ferrite Permanent Magnet Motors: Tutorial Course Notes, Springer.10.1007/978-3-319-32202-5 ↗
9. Churn, P.M. (1998, January 17). Electro-hydraulic actuation of primary flight control surfaces. Proceedings of the All Electric Aircraft, London, UK.10.1049/ic:19980341 ↗
10. A single sided matrix converter drive for a brushless DC motor in aerospace applications10.1109/TIE.2011.2171171 ↗
11. Online inverter fault diagnosis of buck-converter BLDC motor combinations10.1109/TPEL.2014.2330420 ↗
12. A reduced sensor PFC BL-Zeta converter based VSI fed BLDC motor drive10.1016/j.epsr.2013.01.006 ↗
13. A simple analog BLDC drive control for electro-mechanical energy storage system10.1016/j.egypro.2011.10.131 ↗
14. Hosseini, S.H., Nejabatkhah, F., Niapoor, S.A.K.M., and Danyali, S. (2010, January 21–23). Supplying a brushless dc motor by z-source PV power inverter with FL-IC MPPT. Proceedings of the International Conference on Green Circuits and Systems, Shanghai, China.10.1109/ICGCS.2010.5543013 ↗
15. Brushless DC motor drives supplied by PV power system based on Z-source inverter and FL-IC MPPT controller10.1016/j.enconman.2011.04.016 ↗
16. Design and control of a standalone PV water pumping system10.1016/j.jesit.2016.03.003 ↗
17. DSP implementation of a PV system with GA-MLP-NN based MPPT controller supplying BLDC motor drive10.1016/j.enconman.2006.04.022 ↗
18. Kumar, R., and Singh, B. (2016, January 17–19). Grid interfaced solar PV powered brushless DC motor driven water pumping system. Proceedings of the 2016 7th India International Conference on Power Electronics, Thapar Univ, Electr & Instrumentat Eng Department, Patiala, India.10.1109/IICPE.2016.8079369 ↗
19. Gopinath, M., Yuvaraja, T., and Jeykumar, S. (2016, January 29–30). Implementation of four quadrant operation of BLDC motor using model predictive controller. Proceedings of the Materials Today, Ongole, India.
20. Abraham, I., and Pressman, K.B. (2009). Taylor Morey. Switching Power Supply Design, McGraw-Hill. [3rd ed.].
21. Mahdavi, J., Emadi, A., and Toliyat, H.A. (1997, January 5–9). Application of state space averaging method to sliding mode control of PWM DC/DC converters. Proceedings of the Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting, New Orleans, LA, USA.
22. Scheme based on buck-converter with three-phase H-bridge combinations for high-speed BLDC motors in aerospace applications10.1049/iet-epa.2017.0615 ↗
23. Extensions of averaging theory for power electronic systems10.1109/63.506119 ↗
24. Yu, C. (2006). Autotuning of PID Controllers, a Relay Feedback Approach, Springer. [2nd ed.].