journal article·2021-02-01Open access

Coupled Thermomechanical Responses of Zirconium Alloy System Claddings under Neutron Irradiation

Hui Zhao, Chong Yang, Dongxu Guo, Lu Wu, Jianjun Mao, Rongjian Pan, Jiantao Qin, Baodong Shi

Applied Sciences· Volume 11· Issue 3

Abstract

Zirconium (Zr) alloy is a promising fuel cladding material used widely in nuclear reactors. Usually, it is in service for a long time under the effects of neutron radiation with high temperature and high pressure, which results in thermomechanical coupling behavior during the service process. Focusing on the UO2/Zr fuel elements, the macroscopic thermomechanical coupling responses of pure Zr, Zr-Sn, and Zr-Nb binary system alloys, as well as Zr-Sn-Nb ternary system alloy as cladding materials, were studied under neutron irradiation. As a heat source, the thermal conductivity and thermal expansion coefficient models of the UO2 core were established, and an irradiation growth model of a pure Zr and Zr alloy multisystem was built. Based on the user material subroutine (UMAT) with ABAQUS, the current theoretical model was implemented into the finite element framework, and the consequent thermomechanical coupling behavior under irradiation was calculated. The distribution of temperature, the stress field of the fuel cladding, and their evolution over time were analyzed. It was found that the stress and displacement of the cladding were sensitive to alloying elements due to irradiated growth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear reactor physics and engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Engineering Research Center for Equipment and Technology of Cold Rolled Strip, School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China

State Key Laboratory of Nuclear Fuel and Materials, The First Sub-Institute, Nuclear Power Institute of China, Chengdu 610041, China

Funding

National Natural Science Foundation of China · Foundation for Distinguished Young Scholars of Hebei Province · State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology

References (30)

Show source-provided references
1. Cladding for high performance fuel10.1016/j.pnucene.2011.10.008 ↗
2. Materials for future nuclear energy systems10.1016/j.jnucmat.2019.151837 ↗
3. Materials challenges in nuclear energy10.1016/j.actamat.2012.11.004 ↗
4. Materials selection for nuclear applications: Challenges and opportunities10.1016/j.scriptamat.2017.04.027 ↗
5. Positron annihilation spectroscopy on binary Fe-Cr alloys and ferritic/martensitic steels after neutron irradiation10.1016/j.actamat.2011.06.046 ↗
6. Does rate dependence of Cr precipitation in an ion-irradiated Fe-18Cr alloy10.1016/j.scriptamat.2017.11.040 ↗
7. Williamson, R.L., and Novascone, S.R. (2012). Application of the BISON Fuel Performance Code to the FUMEX-III Coordinated Research Project, International Atomic Energy Agency (IAEA).
8. Thouvenin, G., Ricaud, J.M., and Michel, B. (2006, January 22–26). Alcyone: The PLEIADES fuel performance code dedicated to multidimensional PWR studies. Proceedings of the International Meeting on LWR Fuel Performance, Salamanca, Spain.
9. Numerical Simulation of Irradiation-Thermal-Mechanical Coupling Behaviors in Nuclear Fuel Rods
10. Preliminary Numerical Simulation of Fuel Assembly Deformation under Non-Homogeneous Irradiation Environment
11. Thermo-mechanical behavior simulation coupled with the hydrostatic-pressure-dependent grain-scale fission gas swelling calculation for a monolithic UMo fuel plate under heterogeneous neutron irradiation10.1515/eng-2018-0029 ↗
12. Experimental and numerical investigation on thermo-mechanical behavior of fuel rod under simulated LOCA conditions10.1016/j.nucengdes.2018.06.023 ↗
13. Finite element simulation of gap opening between cladding tube and spacer grid in a fuel rod assembly using crystallographic models of irradiation growth and creep
14. Effect of neutron irradiation on deformation mechanisms operating during tensile testing of Zr-2.5Nb10.1016/j.actamat.2015.09.032 ↗
15. Deflection behavior of focused-ion-beam deposited carbon nanocantilever and overhung structures10.5185/amlett.2017.6889 ↗
16. Cluster dynamics modeling of irradiation growth in single crystal Zr10.1016/j.jnucmat.2020.152312 ↗
17. Liu, J. (2007). Nuclear Structural Materials, Chemical Industry Press.
18. Short communication: ‘Low activation, refractory, high entropy alloys for nuclear applications’10.1016/j.jnucmat.2019.151744 ↗
19. Additive manufactured new hybrid high entropy alloys derived from the AlCoFeNiSmTiVZr system10.1016/j.apsusc.2018.12.300 ↗
20. A pragmatic approach to modelling thermal conductivity of irradiated UO2 fuel: Review and recommendations10.1016/S0022-3115(96)00404-7 ↗
21. A review of the thermophysical properties of MOx and UO2 fuels10.1016/S0022-3115(01)00692-4 ↗
22. Thermal conductivity of zirconium10.1016/0022-3115(95)00110-7 ↗
23. Irradiation creep and growth of zirconium alloys: A critical review10.1016/j.jnucmat.2019.04.021 ↗
24. Hagrman, D.L., and Reymann, G.A. (1979). Matpro-Version 11: A Handbook of Materials Properties for Use in the Analysis of Light Water Reactor Fuel Rod Behavior, Technical Report.10.2172/6442256 ↗
25. Rashid, Y., Dunham, R., and Montgomery, R. (2004). Fuel Analysis and Licensing Code: Falcon Mod01, Electric Power Research Institute. Technical Report EPRI 1011308.
26. Volume conservation during irradiation growth of Zr-2.5Nb10.1016/j.jnucmat.2004.07.042 ↗
27. Enhancing the ABAQUS thermomechanics code to simulate multipellet steady and transient LWR fuel rod behavior10.1016/j.jnucmat.2011.05.044 ↗
28. Thermo-mechanical assessment of full SiC/SiC composite cladding for LWR applications with sensitivity analysis10.1016/j.jnucmat.2017.11.004 ↗
29. A new irradiation growth model for Zr-based components of nuclear reactors for the DIONISIO code10.1016/j.nucengdes.2020.111009 ↗
30. ABAQUS analysis of the SiC cladding fuel rod behavior under PWR normal operation conditions10.1016/j.jnucmat.2018.12.017 ↗