A Finite Element Study on Compressive Resistance Degradation of Square and Circular Steel Braces under Axial Cyclic Loading
Source abstract
Abstract
In this study, detailed finite element analysis was conducted to examine the seismic performance of square and circular hollow steel braces under axial cyclic loading. Finite element models of braces were constructed using ABAQUS finite element analysis (FEA) software and validated with experimental results from previous papers to expand the specimen’s matrix. The influences of cross-section shape, slenderness ratio, and width/diameter-to-thickness ratio on hysteretic behavior and compressive-tensile strength degradation were studied. Simulation results of parametric studies show that both square and circular hollow braces have a better cyclic performance with smaller slenderness and width/diameter-to-thickness ratios, and their compressive-tensile resistances ratio significantly decreases from cycle to cycle after the occurrence of the global buckling of braces.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China
Funding
Beijing Natural Science Foundation Key Project · National Natural Science Foundation Project of China
References (23)
Show source-provided references
1. Response of hollow and concrete-filled CHS braces under cyclic loading. Structures and Buildings
2. Effect of steel braces buckling on inelastic torsion and design prevention of steel braced concrete frame structure10.1016/j.istruc.2020.08.048 ↗
3. Sabelli, R. (2001). Research on Improving the Design and Analysis of Earthquake-Resistant Steel-Braced Frames, EERI.
4. Uriz, P. (2008). Toward Earthquake-Resistant Design of Concentrically Braced Steel-Frame Structures, Pacific Earthquake Engi-neering Research Center.
5. A balanced design procedure for special concentrically braced frame connections10.1016/j.jcsr.2011.04.016 ↗
6. Concentric X-braced frames with HSS bracing10.1007/s13296-012-3012-8 ↗
7. Effect of Mid-span Gusset Plates on the Behavior of Multi-Story X-Braced Frames10.7781/kjoss.2013.25.2.179 ↗
8. Chen, C.H., Lai, J.W., and Mahin, S. (2008, January 12–17). Seismic performance assessment of concentrically braced steel frame buildings. Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.10.1061/41016(314)260 ↗
9. Sen, A.D., Sloat, D., Pan, L., Roeder, C.W., Lehman, D.E., and Berman, J.W. (2013, January 8–9). Evaluation of the seismic performance of two-story concentrically braced frames with weak beams. Proceedings of the 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan.
10. Costonzo, S., D’Aniello, M., Landolfo, R., and Martino, A.D. (2014, January 10–12). The influence of the beam flexural stiffness in the seismic response of inverted-V concentric braced frame. Proceedings of the EUROSTEEL, Naples, Italy.
11. Inelastic seismic response of steel bracing members10.1016/S0143-974X(01)00104-3 ↗
12. Behaviour of square hollow structural steel braces with end connections under reversed cyclic axial loading10.1139/l03-028 ↗
13. Tremblay, R., Haddad, M., Martinez, G., Richard, J., and Moffatt, K. (2008, January 12–17). Inelastic cyclic testing of large size steel bracing members. Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
14. Roufegarinejad, A., and Tremblay, R. (2012). Finite element modeling of the inelastic cyclic response and fracture life of square tubular steel bracing members subjected to seismic inelastic loading. Behav. Steel Struct. Seism. Areas, 97–103.
15. Cyclic testing and numerical modelling of carbon steel and stainless steel tubular bracing members10.1016/j.engstruct.2009.10.005 ↗
16. Fracture ductility of hollow circular and square steel braces under cyclic loading10.1016/j.tws.2018.06.005 ↗
17. (2011). ABAQUS/Standard Version 6.10, User’s Manual, Hibbit, Karlsson and Sorensen Inc.
18. ECCS 1986 (1986). Recommended Testing Procedure for Assessing the Behaviour of Structural Steel Elements under Cyclic Loads, European Convention for Constructional Steelwork.
19. Time-independent constitutive theories for cyclic plasticity10.1016/0749-6419(86)90010-0 ↗
20. Extremely low cycle fatigue tests on structural carbon steel and stainless steel10.1016/j.jcsr.2009.08.004 ↗
21. ANSI/AISC 341-16 (2016). Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction (AISC).
22. Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MOHURD) (2010). Code for Seismic Design of Buildings, Ministry of Housing and Urban-Rural Development of the People’s Republic of China (MO-HURD). GB 50011-2010.
23. ANSI-A, and AISC 341-10 (2010). Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction.