Numerical Assessment of an Innovative RC-Framed Skin for Seismic Retrofit Intervention on Existing Buildings
Source abstract
Abstract
The seismic safety of existing building stock has become a very critical issue in recent years, mainly in earthquake-prone South Europe where most of the buildings were designed before the enforcement of seismic standards. Therefore, the concept, development and testing of efficient and cost-effective seismic retrofitting technologies are nowadays strongly needed, both for the society and for the scientific community. This study deals with the seismic assessment of a new RC-framed skin for retrofit intervention of existing buildings, evaluated through nonlinear static (pushover) analyses. A preliminary description of the proposed technology is provided, then numerical modeling of a typical RC existing building before and after retrofitting intervention is performed within the OpenSees framework. The results revealed that the proposed retrofitting technology improves the seismic performance of the RC building, also modifying the failure mode from a brittle soft-story mechanism to a more ductile one. The presented study, dedicated to the structural aspects of the system, is part of the TIMESAFE research project, where the thermo-hygrometric and acoustic performances achievable by the proposed RC-framed skin are also investigated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Seismic Performance and Analysis · Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Architecture and Arts (DCP), University IUAV of Venice, 30135 Venezia, Italy
Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), University of Bologna, 40126 Bologna, Italy
References (29)
Show source-provided references
1. EN 1998-1:2004 (2004). Eurocode 8: Design of Structures for Earthquake Resistance—Part 1-1: General Rules, Seismic Actions and General Requirements for Structures, European Committee for Standardization.
2. EN 1998-3:2005 (2005). Eurocode 8: Design of Structures for Earthquake Resistance—Part 3: Assessment and Retrofitting of buildings, European Committee for Standardization.
3. Seismic upgrading of existing reinforced concrete buildings: A state-of-the-art review10.1016/j.engstruct.2021.112273 ↗
4. Choi, S.-H., Hwang, J.-H., Han, S.-J., Joo, H.-E., Yun, H.-D., and Kim, K.S. (2020). Seismic performance assessments of RC frame structures strengthened by external precast wall panel. Appl. Sci., 10.10.3390/app10051749 ↗
5. Margani, G., Evola, G., Tardo, C., and Marino, E.M. (2020). Energy, seismic, and architectural renovation of rc framed buildings with prefabricated timber panels. Sustainability, 12.10.3390/su12124845 ↗
6. Concurrent seismic and energy retrofitting of RC and masonry building envelopes using inorganic textile-based composites combined with insulation materials: A new concept10.1016/j.compositesb.2018.04.002 ↗
7. Marini, A., Passoni, C., Belleri, A., Feroldi, F., Preti, M., Metelli, G., Riva, P., Giuriani, E., and Plizzari, G. (2017). Combining seismic retrofit with energy refurbishment for the sustainable renovation of RC buildings: A proof of concept. Eur. J. Environ. Civ. Eng., 1–21.10.1080/19648189.2017.1363665 ↗
8. Manfredi, V., and Masi, A. (2018). Seismic strengthening and energy efficiency: Towards an integrated approach for the rehabilitation of existing RC buildings. Buildings, 8.10.3390/buildings8030036 ↗
9. Ferrante, A., Mochi, G., Predari, G., Badini, L., Fotopoulou, A., Gulli, R., and Semprini, G. (2018). A European project for safer and energy efficient buildings: Pro-GET-onE (proactive synergy of integrated efficient technologies on buildings’ envelopes). Sustainability, 10.10.3390/su10030812 ↗
10. D’Urso, S., and Cicero, B. (2019). From the efficiency of nature to parametric design. A holistic approach for sustainable building renovation in seismic regions. Sustainability, 11.10.3390/su11051227 ↗
11. An experimental and numerical study on CLT panels used as infill shear walls for RC buildings retrofit10.1016/j.conbuildmat.2019.03.196 ↗
12. (2021, August 16). TIMESAFE. Available online: http://timesafe.it/.
13. Pozza, L., Esposti, A.D., Bonoli, A., Talledo, D., Barbaresi, L., Semprini, G., and Savoia, M. (2021). Multidisciplinary Performance Assessment of an Eco-Sustainable RC-framed skin for the integrated upgrading of existing buildings. Sustainability, 13.10.3390/su13169225 ↗
14. Nonlinear finite-element analysis software architecture using object composition10.1061/(ASCE)CP.1943-5487.0000002 ↗
15. Petracca, M., Candeloro, F., and Camata, G. (2017). STKO User Manual, ASDEA Software Technology.
16. Plastic hinge integration methods for force-based beam–Column elements10.1061/(ASCE)0733-9445(2006)132:2(244) ↗
17. Theoretical stress strain model for confined concrete10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
18. A numerical approach to the complete stress-strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
19. Filippou, F.C., Popov, E.P., and Bertero, V.V. (1983). Effects of bond deterioration on hysteretic behavior of reinforced concrete joints. Report n. UCB/EERC 83-19, Earthquake Engineering Research Center, University of California.
20. NTC 2018 (2018). Aggiornamento delle «Norme Tecniche per le Costruzioni», MIT. (In Italian).
21. Degradation of shear strength of reinforced concrete members with inelastic cyclic displacements
22. EN 1992-1-1:2004 (2004). Eurocode 2: Design of Concrete Structures—Part 1-1: General Rules and Rules for Buildings, CEN.
23. Corrosion effects on the seismic response of existing rc frames designed according to different building codes10.1016/j.engstruct.2020.110397 ↗
24. EN 1991-1-1:2002 (2002). Eurocode 1: Actions on Structures, CEN.
25. Taerwe, L., and Matthys, S. (2013). Fib Model Code for Concrete Structures 2010, Ernst & Sohn, Wiley.
26. Verderame, G.M., Stella, A., and Cosenza, E. (2001, January 9–13). Le proprietà meccaniche degli acciai impiegati nelle strutture in c.a. realizzate negli anni ‘60. Proceedings of the Atti del X Congresso Nazionale ANIDIS ‘L’ingegneria Sismica in Italia, Potenza, Matera, Italy.
27. Fintel, M. (1985). Tubular structures for tall buildings. Handbook of Concrete Engineering, Van Nostrand Reinhold Company.10.1007/978-1-4757-0857-8 ↗
28. Simple method for approximate analysis of framed tube structures10.1061/(ASCE)0733-9445(1994)120:4(1221) ↗
29. Mitigating shear lag in tall buildings10.1007/s40091-015-0098-1 ↗