Thermal Performance of Cryogenic Micro-Pin Fin Coolers with Two-Phase Liquid Nitrogen Flows
Source abstract
Abstract
This study experimentally explores the thermofluidic performance of a cryogenic micro-pin fin cooler with two-phase liquid nitrogen flows. The liquid nitrogen cooling system is introduced to investigate the performance of the micro-pin cooler in a cryogenic condition. The result reveals that the nominal value of the base heat transfer coefficients of the micro-pin fin cooler with liquid nitrogen flows, 240 kW/m2-K at a mass flow rate of 2.23 g/s, is an order of magnitude greater than that with FC-72 flows. The result also demonstrates that the base heat transfer coefficient of the micro-pin fin cooler is nearly three times greater than that of the micro-gap cooler, not containing any fins. This study shows the feasibility of the cryogenic micro-pin fin cooler for thermally controlling very high heat density devices such as high-power laser diode bars, of which the heat density can reach 2000 kW/m2.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Heat Transfer and Optimization · Heat Transfer and Boiling Studies · Refrigeration and Air Conditioning Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Design Engineering, Pukyong National University, Busan 48513, Korea
Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
References (28)
Show source-provided references
1. High quality flow boiling heat transfer and pressure drop in microgap pin fun array10.1016/j.ijheatmasstransfer.2014.05.021 ↗
2. Experimental study on flow and heat transfer characteristics at onset of nucleate boiling in micro pin fin heat sinks10.1016/j.expthermflusci.2019.109946 ↗
3. Experimental and numerical study on convective boiling in a staggered array of micro pin-fin microgap10.1016/j.ijheatmasstransfer.2019.119203 ↗
4. Water flow boiling in a partially modified microgap with shortened micro pin fins10.1016/j.ijheatmasstransfer.2020.119819 ↗
5. Experimental study on two-phase pressure drop and flow boiling heat transfer in a micro pin fin channel heat sink under constant heat flux10.1080/08916152.2020.1725182 ↗
6. Single phase laminar fluid flow and heat transfer in microchannel with cylindrical and parallelepiped micro-fins10.1007/s00231-018-2419-y ↗
7. Study of laminar single phase frictional factor and Nusselt number in In-line micro pin-fin heat sink for electronic cooling applications10.1016/j.ijheatmasstransfer.2019.04.118 ↗
8. Single-phase thermal and hydraulic performance of embedded silicon micro-pin fin heat sinks using R245fa10.1016/j.ijheatmasstransfer.2019.05.073 ↗
9. Experimental study on single-phase hybrid microchannel cooling using HFE-7100 for Liquid-cooled chips10.1016/j.ijheatmasstransfer.2020.120230 ↗
10. Flow boiling of water in a circular staggered micro-pin fin heat sink10.1016/j.ijheatmasstransfer.2007.11.026 ↗
11. Experimental study of saturated flow boiling heat transfer in an array of staggered micro-pin fins10.1016/j.ijheatmasstransfer.2008.10.008 ↗
12. A comparison of flow boiling heat-transfer in in-line mini pin fin and plane channel flows10.1016/j.applthermaleng.2010.06.011 ↗
13. Thermal management of time-varying high heat flux electronic devices10.1115/1.4027325 ↗
14. Flow boiling of liquid nitrogen in micro-tubes: Part II—Heat transfer characteristics and critical heat flux10.1016/j.ijheatmasstransfer.2007.08.017 ↗
15. Experimental study on the heat transfer characteristics of saturated liquid nitrogen flow boiling in small-diameter horizontal tubes10.1016/j.expthermflusci.2018.09.020 ↗
16. Thermal and optical performance of cryogenically cooled laser diode bars mounted on pin-finned microcoolers10.1007/s00340-021-07590-0 ↗
17. Correlation for boiling heat transfer to saturated fluids in convective flow10.1021/i260019a023 ↗
18. Forced convective boiling in vertical tubes for saturated components and binary mixtures10.1002/aic.690260317 ↗
19. Correlation for flow boiling heat transfer at low liquid Reynolds number in small diameter channels10.1115/1.2039105 ↗
20. Gas-iquid two-phase flow across a bank of micropillaras10.1063/1.2722424 ↗
21. Two-phase flow in rough tubes
22. Proposed correlation of data for isothermal two-phase, two-component flow in pipes
23. Thermal-hydraulic performance of MEMS based pin fin heat sink10.1115/1.2137760 ↗
24. Performance of pin fin cast aluminum, coldwalls, part 2: Colburn j-factor correlations10.2514/2.6693 ↗
25. Hands, B.A. (1986). Cryogenic Engineering, Academic Press. [1st ed.].
26. Haynes, W.M. (2013). CRC Chemistry/Physics Handbook, CRC Press. [93rd ed.].
27. (2000). 3M Fluorinert. Product Information.
28. Parametric Investigation into the effects of pressure, subcooling, surface augmentation and choice of coolant on pool boiling in the design of cooling systems for high-power-density electronic chips10.1115/1.2904392 ↗