Development and Evaluation of Low-Damage Maize Snapping Mechanism Based on Deformation Energy Conversion
Source abstract
Abstract
Reducing ear damage is the key to improving the quality of maize harvests. In order to reduce the impact and damage of the ear caused by the ear snapping mechanism, this paper proposes a method to convert ear deformation energy during collision into elastic potential energy in the ear snapping mechanism. According to the above method, a low-damage maize snapping mechanism was designed. In order to verify the feasibility of energy conversion in reducing damage, the dynamic model of the contact between the ear and the snapping plate was established, and a dynamic simulation analysis was carried out based on the finite element method (FEM). In order to obtain better parameters for the improved mechanism, a test rig was established, after which a performance test was carried out on the test rig. The results showed that the primary and secondary order that affected the ear damage rate was the rotational speed of the snapping roller, the spring stiffness and the forward speed. The data processing software Design Expert was used to optimize the parameters, it was concluded that when the rotational speed was 805 r·min−1, the forward speed was 1.29 m·s−1, the spring stiffness was 33.5 N·mm−1, the model predicted that the ear damage rate was 0.023%. Therefore, this paper could provide further reference for research into maize low-damage ear snapping technology.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Soil Mechanics and Vehicle Dynamics · Agricultural Engineering and Mechanization · Mineral Processing and Grinding
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Mechanical and Electronic Engineering, Shandong Agricultural University, Tai’an 271018, China
Shandong Provincial Engineering Laboratory of Agricultural Equipment Intelligence, Tai’an 271018, China
Funding
Shandong Provincial Key Science and Technology Innovation Engineering Project · Shandong Provincial Natural Science Foundation · 13th Five-Year National Key Research and Development Program
References (34)
Show source-provided references
1. Soil physical properties and maize root growth under different tillage systems in the North China Plain10.1016/j.cj.2018.05.009 ↗
2. Research progress of maize mechanized harvesting technology
3. Review of combine harvester losses for maize and influencing factors
4. Machine losses from conventional versus narrow row corn harvest10.13031/2013.8744 ↗
5. Measurement of Combine Losses for Corn and Soybeans in Brazil
6. Development and application of mechanized maize harvesters
7. Effect of impact parameters and moisture content on kernel loss during corn snapping10.31545/intagr/113490 ↗
8. Experiments and modeling of mechanism analysis of maize picking loss
9. Optimisation of maize picking mechanism by simulation analysis and high-speed video experiments10.1016/j.biosystemseng.2019.11.010 ↗
10. A review of grain kernel damage: Mechanisms, modeling, and testing procedures10.13031/trans.13643 ↗
11. Theoretical analysis and finite element simulation of a rice kernel obliquely impacted by a threshing tooth10.1016/j.biosystemseng.2012.11.006 ↗
12. Design and testing of seed maize ear peeling roller based on hertz theory10.1016/j.biosystemseng.2020.12.014 ↗
13. Evaluation of fruit damage caused by mechanical harvesting of table olives
14. ‘Jazz’ apple impact bruise responses to different cushioning materials10.13031/trans.11946 ↗
15. Damage caused by multiple impacts of litchi fruits during vibration harvesting10.1016/j.compag.2019.04.037 ↗
16. Evaluation of litchi impact damage degree and damage susceptibility10.1016/j.compag.2020.105409 ↗
17. Determination of bruise susceptibility of pears (Ankara variety) to impact load by means of FEM-based explicit dynamics simulation10.1016/j.postharvbio.2017.01.015 ↗
18. Prediction of bruise susceptibility of harvested kiwifruit (Actinidia chinensis) using finite element method10.1016/j.postharvbio.2019.02.013 ↗
19. Mechanical bruising of young coconut10.1016/j.biosystemseng.2011.04.002 ↗
20. A Mastercurve to predict annual ryegrass (Lolium rigidum) seed devitalisation when exposed to multiple single sided impacts10.1016/j.biosystemseng.2015.02.015 ↗
21. Collision injury assessment of mechanical harvesting blueberry fruit based on collision deformation energy
22. Threshing and separating process—A mathematical model10.13031/2013.33478 ↗
23. Wang, X. (2007). Mechanical Properties of Rice Grain and Threshing Injury Based on the Energy Conservation. [Master’s Thesis, Jiangsu University].
24. Threshing injury to rice grain based on the energy conservation10.3901/JME.2007.03.160 ↗
25. Loss reduction mechanism and experiment on snapping of rigid-flexible coupling corn head
26. Li, K. (2018). Design and Experimental Study on Gap-Adjustable Combined Ear-Picking Mechanism of Corn. [Ph.D. Thesis, China Agricultural University].
27. Drop test of pear fruit: Experimental measurement and finite element modelling10.1016/j.biosystemseng.2016.03.004 ↗
28. Determination of time dependent stress distribution on a potato tuber during drop case10.1111/jfpe.12869 ↗
29. Effects of bruising of ‘pink lady’ apple under impact loading in drop test on firmness, colour and gas exchange of fruit during long term storage10.1016/j.postharvbio.2021.111561 ↗
30. Simulation of a maize ear picking device with a longitudinal horizontal roller based on hypermesh modeling10.15376/biores.16.1.1394-1410 ↗
31. Dynamic simulation and high-speed photography experiment on corn-ear husking
32. Hou, M. (2017). Study on Mechanical Properties of Corn Kernel and Design of Threshing Test Bed. [Master’s Thesis, Henan Agricultural University].
33. Finite element analysis of dynamic impact damage process of maize kernel based on HyperMesh and LS-DYNA
34. Pan, L., and Chen, J. (2008). Experiment Design and Data Processing, Southeast University Press.