The Effect of Clamping Force on the Wear Behavior of a Steam Generator Tube
Source abstract
Abstract
Anti-vibration bars (AVBs) are essential components of a steam generator (SG) and are used to prevent steam generator tubes (SGTs) from vibrating intensely because of flow-induced vibration. However, the contact force generated at contact surfaces between AVBs and tubes can change the natural frequency and wear behavior of the tube. Contact force is represented by clamping force in this study. Considering the effect of the clamping force on the natural frequency and sliding distance of SGT, dynamic wear behavior under different clamping forces was analyzed based on the finite element method, and the natural frequency of the tube was measured in the present work. Moreover, the wear experiment was conducted at room temperature to verify the conclusions of dynamic behavior analysis. The increase in clamping force reduces the sliding distance of SGT, and wear depth affected by both clamping force and sliding distance also decreases.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Vibration and Dynamic Analysis · Mechanical Failure Analysis and Simulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Process Equipment and Control Engineering, College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China
Engineering Research Center of Process Equipment and Remanufacturing, Ministry of Education, Hangzhou 310023, China
Shanghai Nuclear Engineering Research & Design Institute Co., Ltd., Shanghai 200233, China
Funding
National Key R&D Program of China · National Natural Science Foundation of China · Shanghai Rising-Star Program
References (23)
Show source-provided references
1. Steam generator tube rupture (SGTR) scenarios10.1016/j.nucengdes.2004.08.060 ↗
2. A heat transfer tube wear reliability analysis method based on first-order reliability method
3. Phalippou, C., Ruffet, F., Herms, E., and Balestreri, F. (2013, January 14–18). PWR steam generator tube and AVB wear under perpendicular impacting. Proceedings of the Pressure Vessels and Piping Conference, Paris, France.10.1115/PVP2013-97263 ↗
4. Markov stochastic process modeling for evolution of wear depth in steam generator tubes10.1177/1687814019846256 ↗
5. Flow-induced vibration and wear of steam generator tubes10.13182/NT55-311 ↗
6. Overview of steam generator tube degradation and integrity issues10.1016/S0029-5493(99)00167-3 ↗
7. Vibration analysis of shell-and-tube heat exchangers: An overview—Part 2: Vibration response, fretting-wear, guidelines10.1016/j.jfluidstructs.2003.08.008 ↗
8. Numerical analysis of the fluidelastic vibration of a steam generator tube with loose supports10.1016/0889-9746(92)90057-A ↗
9. Lalonde, V., Ross, A., Pettigrew, M.J., and Nowlan, I. (2010, January 1–5). Experimental Study of Dynamic Interaction Between a Steam Generator Tube and an Anti-Vibration Bar. Proceedings of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, QC, Canada.10.1115/FEDSM-ICNMM2010-31017 ↗
10. Nowlan, I., Ross, A., and Pettigrew, M.J. (2009, January 26–30). Dynamic Interaction Between a Straight Tube and an Anti-Vibration Bar. Proceedings of the Asme Pressure Vessels and Piping Division Conference, Prague, Czech Republic.10.1115/PVP2009-77804 ↗
11. The role of the third body in the fretting wear of 690 alloy10.1142/S0217979220500770 ↗
12. Running condition and material response fretting maps of incoloy 800 steam generator tubes against AISI 304L pads in air and room temperature10.1016/j.triboint.2019.03.027 ↗
13. Investigation of fretting wear behavior of Inconel 690 alloy in tube/plate contact configuration10.1016/j.wear.2015.04.003 ↗
14. Evolution of wear damage in 690 alloy tube mated with 405 stainless steel plate due to fretting conditions10.1016/j.triboint.2021.107177 ↗
15. An experimental study on fretting wear behavior of cross-contacting Inconel 690 tubes10.1016/j.nucengdes.2011.08.024 ↗
16. Finite element simulation and experimental validation of fretting wear10.1016/j.wear.2003.07.001 ↗
17. Impact-fretting wear behavior of Inconel 690 alloy tubes effected by pre-compressive stress10.1016/j.jallcom.2017.07.091 ↗
18. Fretting wear between Alloy 690 and 405 stainless steel in high temperature pressurized water with different normal force and displacement10.1016/j.jnucmat.2019.151930 ↗
19. Nondestructive measurement of pear texture by acoustic vibration method10.1016/j.postharvbio.2014.05.006 ↗
20. The wear of metals under unlubricated conditions
21. Effect of normal force on fretting wear behavior and mechanism of Alloy 690TT in high temperature water10.1016/j.wear.2016.09.018 ↗
22. Effect of normal force on the fretting wear behavior of Inconel 690 TT against 304 stainless steel in simulated secondary water of pressurized water reactor10.1016/j.triboint.2018.05.020 ↗
23. Prediction of Fretting Wear Depth for Steam Generator Tubes Based on Various Types of Wear Scars10.1080/18811248.2010.9711635 ↗