journal article·2022-03-04Open access

A Feasibility Study of an ESG to Suppress Road Noise of a Car

Young-Sup Lee, Seokhoon Ryu, Eunsuk Yoo, Chasub Lim

Applied Sciences· Volume 12· Issue 5

Abstract

This study considered implementing an active road noise control (ARNC) system using an electronic sound generator (ESG) as a secondary actuator to suppress road noise in a car cabin. The ESG was installed to the cowl panel of a test car to generate structure-borne anti-noise by vibrating the panel. A robust multiple-reference single-input single-output (MR-SISO) ARNC algorithm based on the FxLMS was designed. Four 3-axis accelerometers and a microphone were adopted to acquire the reference signals and the error signal for the control algorithm. The radiated sound pressure from the ESG–cowl pair was high enough to suppress the road noise at a car speed of 60 kph. The optimized least number of reference signals and their locations were determined after computer simulation from the measured primary path data. Real-time control experiments showed an A-weighted sound pressure level reduction of 6.0 dB in the average of three dominant road booming noises in 100–250 Hz with the four optimized reference signals at 60 kph. More reference signals gave a further reduction such as 8.3 dB with 12 reference signals. Thus, this study suggests that the ESG coupled with the cowl panel can be an affordable alternative as a secondary actuator in an ARNC system to suppress road noise in a car.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Vehicle Noise and Vibration Control · Acoustic Wave Phenomena Research · Advanced Adaptive Filtering Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Embedded Systems Engineering, Incheon National University, Incheon 22012, Korea

Hyundai Motor Company, Hwaseong 18280, Korea

References (19)

Show source-provided references
1. Elliott, S.J. (2001). Signal Processing for Active Control, Academic Press.10.1016/B978-012237085-4/50012-0 ↗
2. Current status and future development of ANC systems
3. Kuo, S.M., and Morgan, D.R. (1996). Active Noise Control Systems: Algorithms and DSP Implementations, John Wiley & Sons.
4. Active control for road noise inside vehicles10.3397/1.2828351 ↗
5. Multichannel control systems for the attenuation of interior road noise in vehicles10.1016/j.ymssp.2015.01.008 ↗
6. Active Control of Structure-Borne Road Noise Based on the Separation of Front and Rear Structural Road Noise Related Dynamics10.4271/2015-01-2222 ↗
7. Development of a Mass-producible ANC System for Road Noise10.1007/s38311-018-0080-1 ↗
8. Active control system for low-frequency road noise combined with an audio system10.1109/89.952494 ↗
9. Cheer, J., and Elliott, S.J. (2013, January 2–7). Multichannel feedback control of interior road noise. Proceedings of the Meetings on Acoustics ICA2013, Montreal, QC, Canada.10.1121/1.4799168 ↗
10. Active control of structure-borne road noise using vibration actuator10.1115/1.2893860 ↗
11. Active structural and acoustic control of structure-borne road noise in a passenger car10.1260/0957456991496664 ↗
12. Active vibration control on a quarter-car for cancellation of road noise disturbance10.1016/j.jsv.2012.02.030 ↗
13. (2022, January 13). Kendrion, Sound Systems for Vehicle Interiors, Kendrion. Available online: https://www.kendrion.com/en/products/sound-systems/sound-systems-for-vehicle-interiors.
14. Audrain, P. (2011). Active Sound Design (No. 2011-01-0927), SAE Technical Paper.10.4271/2011-01-0927 ↗
16. A computationally efficient multichannel active road noise control system10.1115/1.4028183 ↗
17. The response of and sound power radiated by a clamped rectangular plate10.1006/jsvi.1997.1125 ↗
18. Fahy, F., and Gardonio, P. (2007). Sound and Structural Vibration, Academic Press. [2nd ed.].
19. Eigenvalue equalization filtered-x algorithm for the multichannel active noise control of stationary and nonstationary signals10.1121/1.2903857 ↗