Verification of Longitudinal Level Irregularity Suppression Effect at the Structural Boundary by Ballasted Ladder Track
Source abstract
Abstract
The ladder sleeper, which is a type of longitudinal sleeper with long beams in the longitudinal direction of the rail, was developed for the maintenance-labor saving of ballast tracks. In this study, to quantify the load distribution performance of the ladder sleepers at the structural boundary, full-scale model tests were conducted to quantify the vibration transmission reduction effect of the ladder sleepers. Following that, numerical experiments were carried out using a three-dimensional numerical analysis model and it was revealed that the ladder sleeper can reduce the pressure on the sleeper bottom plane by approximately 70% when compared to conventional prestressed concrete sleepers. Furthermore, when laying the ladder sleeper at the structural boundary, it was shown that laying across the structural boundary may be more effective in reducing the pressure on the sleeper bottom plane than laying it in front of the structural boundary. Finally, ladder sleepers were installed on the commercial line and long-term measurements of the longitudinal level irregularity verified the effect of suppressing the longitudinal level irregularity of the ballasted ladder track.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Railway Engineering and Dynamics · Geotechnical Engineering and Underground Structures · Civil and Geotechnical Engineering Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Railway Dynamics Division, Railway Technical Research Institute, 2-8-38 Hikari-cho, Kokubunji-shi, Tokyo 185-8540, Japan
References (28)
Show source-provided references
1. Ladder sleeper and new track structures development
2. Wakui, H., Matsumoto, N., Asanuma, K., David, M.R., and Kenneth, J.L. (2001, January 10–14). Performance of ballasted ladder track under heavy axle loads at TTCI. Proceedings of the 7th International Heavy Haul Conference, Brisbane, Australia.
3. Okuda, H., Sogabe, M., Matsumoto, N., and Wakui, H. (2003, January 27). Environmental performance improvement of railway structural system using ladder track. Proceedings of the IABSE Symposium, Antwerp, Belgium.10.2749/222137803796330068 ↗
4. Estimation of structure-borne noise reduction effect of steel railway bridge equipped with floating ladder track and floating reinforced concrete deck10.1299/jmtl.3.83 ↗
5. An experimental study of train-induced structural and environmental vibrations of a rail transit elevated bridge with ladder tracks10.1243/09544097JRRT304 ↗
6. An experimental study of vibration reduction of a ballasted ladder track10.1177/0954409716642488 ↗
7. Buckling safety analyses of ballasted ladder track under thermal and vehicle loads
8. Development of ballasted ladder track equipped with a vehicle guide device
9. Review of the lateral resistance of ballasted tracks10.1177/0954409719866355 ↗
10. (2022, March 08). SATEBA. Available online: https://sateba.com/solutions/light-speed-rail/.
11. Analysis of the Vibration Mitigation Characteristics of the Ballasted Ladder Track with Elastic Elements10.3390/su11236780 ↗
12. Use of shock mats for mitigating degradation of railroad ballast
13. A Novel Approach to the Analysis of Under Sleeper Pads (USP) Applied in the Ballasted Track Structures10.3390/ma13112438 ↗
14. Laboratory Tests and Analyses of the Level of Vibration Suppression of Prototype under Ballast Mats (UBM) in the Ballasted Track Systems10.3390/ma14020313 ↗
15. A study on limit state design method for prestressed concrete sleepers
16. Railway Technical Research Institute (2012). Design Standards for Railway Structures and Commentary (Track Structures), Railway Technical Research Institute and Maruzen Co., Ltd.
17. Validation of a dynamic wheel load factor and the influence of various track irregularities on the dynamic response of prestressed concrete sleepers10.1177/0954409719891655 ↗
18. Japanese Industrial Standards Committee (1997). Prestressed Concrete Sleepers—Pretensioning Type, Japanese Standards Association.
19. Kodai, M., and Tsutomu, W. (2018). Application of a Frequency Based Detection Method for Evaluating Damaged Concrete Sleepers. Advances in Structural Health Monitoring, IntechOpen. Available online: https://www.intechopen.com/books/advances-in-structural-health-monitoring/applicationof-a-frequency-based-detection-method-for-evaluatingdamaged-concrete-sleepers.
20. A study on dynamic interaction analysis for railway vehicle and structures
21. Simulation of a Shinkansen train on the railway structure during an earthquake10.1007/s13160-011-0022-4 ↗
22. Simulation and visualization of high-speed Shinkansen train on the railway structure10.1007/BF03167350 ↗
23. Railway Technical Research Institute (2007). Design Standards for Railway Structures and Commentary (Concrete Structures), Railway Technical Research Institute and Maruzen Co., Ltd.
24. (2022, March 08). Tokyo Measuring Instruments Lab. Available online: https://tml.jp/e/product/special_ins/fwd-light2.html.
25. Japanese Industrial Standards Committee (2001). Flat Bottom Railway Rails and Special Rails for Switches and Crossings of Non-Treated Steel, ISO.
26. Ishida, M., Namura, A., and Suzuki, T. (October, January 28). Track settlement measurements and dynamic prediction model based on settlement laws. Proceedings of the World Congress on Railway Research, Edinburgh, Scotland, UK.
27. Measurement on dynamic behavior of track near rail joints and prediction of track settlement
28. Sekine, E., and Kohata, Y. (2003, January 4–8). Strength and deformation characteristics of railroad ballst in abrasion process of ballast particles. Proceedings of the 12th Asian Regional Conference on Soil Mechanics & Geotechnical Engineering, Singapore.