journal article·2022-05-09Open access

Cross-Regional Dynamic Transfer Characteristics of Liquid Oil Contamination Induced by Random Contact in Machining Workshops in Shanghai, China

Xin Wang, Jinchi Zhao, Yinchen Yang, Yukun Xu

Applied Sciences· Volume 12· Issue 9

Abstract

In industrial sites, the movement and contact behaviors of workers are random, but their frequency and statistical characteristics can be determined. Particularly in machining workshops, metalworking fluids (MWFs) cause liquid oil contamination on the processed workpieces, and the contamination spreads to the entire workshop given the random contact of workers or the handling of workpieces. This study proposes a contact transmission model based on the Markov chain to quantify oil contamination transfer. First, the transfer efficiency between the glove and the workpiece, which is regarded as a key model parameter in this research, was determined through experiments. The model was used to characterize and predict the spread of oil contamination across different regions, including production and assembly areas. Specifically, the oil contamination concentrations on workbench surfaces in seven locations of a machining workshop in Shanghai GKN HUAYU Driveline Systems Co., Ltd. (SDS) were measured on-site. Findings showed that the model could feasibly depict the transfer process of oil contamination across different surfaces. Then, the variation law of oil contamination concentration on the workbench surfaces over time was analyzed, the oil contamination distribution map of the entire workshop plane was drawn, and the effectiveness of two cleaning measures to reduce oil contamination concentrations was compared. The proposed contact transmission model offers a basis for identifying highly polluted surfaces in machining workshops and controlling the spread of liquid oil contamination.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Occupational Health and Safety Research · Indoor Air Quality and Microbial Exposure · Occupational exposure and asthma

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200093, China

School of Mechanical Engineering, Tongji University, Shanghai 200092, China

Funding

Machinery Industry Innovation Platform Construction Project of China · Shandong Construction Department Research and Development Project

References (35)

Show source-provided references
1. Influence of spray painting parameters on breathing zone particle size distributions10.1080/1047322X.1997.10387758 ↗
2. Investigation of moisture condensation on papermaking plant envelopes in high humidity environment by orthogonal analysis and CFD simulation10.1016/j.buildenv.2011.01.031 ↗
3. Experimental research on free settling properties of different types of single fiber particle in air10.1016/j.buildenv.2020.107300 ↗
4. Quantitative exposure assessment of various chemical substances in a wafer fabrication industry facility10.5491/SHAW.2011.2.1.39 ↗
5. Occupational hazards control of hazardous substances in clean room of semiconductor manufacturing plant using CFD analysis10.1177/0748233712469996 ↗
6. Chen, Y.P. (2016). Research of Purification Technology of Air Contaminated with Dust and Oil Mist in Workshop, Hunan University of Technology.
7. Mei, X. (2019). Investigation on Transmission and Dispersion of Particles in Limited Space with Markov Chain Based Probabilistic Model, Hunan University.
8. Exposure assessment to suggest the cause of sinusitis developed in grinding operations utilizing soluble metalworking fluids10.1539/joh.47.319 ↗
9. Investigating respiratory responses to metalworking fluid exposure10.1080/10473220390237610 ↗
10. Applebaum, Increased risk of renal cell carcinoma following exposure to metalworking fluids among autoworkers10.1016/j.annepidem.2015.06.014 ↗
11. Fault diagnosis and analysis of hydraulic system of CNC machine tool
12. Filter allocation and replacement strategies in fluid power system under uncertainty: A fuzzy robust nonlinear programming approach10.1007/s11081-011-9147-1 ↗
13. Oil contamination control of hydraulic system of engineering machine
14. Effect of MQL and dry processes on pariticle emission and part quality during milling of aluminum alloys10.1007/s00170-017-0339-5 ↗
15. Experimental study of oil mist characteristics generated from minimum quantity lubrication and flood cooling10.1016/j.enbenv.2020.05.005 ↗
16. Monitoring and purification of oil mist particles in a machining workshop
17. Transport and control of droplets: A comparison between two types of local ventilation airflows10.1016/j.powtec.2019.01.008 ↗
18. The influence of indoor thermal conditions on ventilation flow and pollutant dispersion in downstream industrial workshop10.1016/j.buildenv.2020.107400 ↗
19. A grid-merging operation to accelerate the Markov chain model in predicting steady-state and transient transmission of airborne particles10.1016/j.buildenv.2017.05.038 ↗
20. Markov-chain-based inverse modeling to fast localize hazardous gaseous pollutant sources in buildings with ventilation systems10.1016/j.buildenv.2019.106584 ↗
21. Markov modeling of contaminant concentrations in indoor air10.1202/0002-8894(2000)061<0484:MMOCCI>2.0.CO;2 ↗
22. Calculation method of state transfer matrix in Markov chain model for airborne contaminant transport: Investigation and improvement10.1016/j.buildenv.2020.107295 ↗
23. Modeling transient particle transport in transient indoor airflow by fast fluid dynamics with the Markov chain method10.1016/j.buildenv.2020.107323 ↗
24. A Markov chain model for predicting transient particle transport in enclosed environments10.1016/j.buildenv.2015.03.024 ↗
25. Contaminant transport at large Courant numbers using Markov matrices10.1016/j.buildenv.2016.11.007 ↗
26. An Integrated Model of Infection Risk in a Health-Care Environment10.1111/j.1539-6924.2006.00802.x ↗
27. Routes of transmission of influenza A H1N1, SARS CoV, and norovirus in air cabin: Comparative analyses10.1111/ina.12445 ↗
28. Xiao, S., Li, Y., Wong, T.-W., and Hui, D.S.C. (2017). Role of fomites in SARS transmission during the largest hospital outbreak in Hong Kong. PLoS ONE, 12.10.1371/journal.pone.0181558 ↗
29. Probable transmission routes of the influenza virus in a nosocomial outbreak10.1017/S0950268818001012 ↗
30. Xiao, S.L., Tang, J.L.W., and Li, Y.G. (2017). Airborne or fomite transmission for norovirus? A case study revisited. Int. J. Environ. Res. Public Health, 14.10.3390/ijerph14121571 ↗
31. Logistic growth of a surface contamination network and its role in disease spread10.1038/s41598-017-13840-z ↗
32. The dynamic fomite transmission of Methicillin-resistant Staphylococcus aureus in hospitals and the possible improved intervention methods10.1016/j.buildenv.2019.106246 ↗
33. An experimental investigation of air quality in wet and dry turning10.1016/S0007-8506(07)62896-0 ↗
34. On-demand ventilation and energy conservation of industrial exhaust systems based on stochastic modelling10.1016/j.enbuild.2020.110158 ↗
35. A circulating ventilation system to concentrate pollutants and reduce exhaust volumes: Case studies with experiments and numerical simulation for the rubber refining process10.1016/j.jobe.2020.101984 ↗