journal article·2022-05-11Open access

Finite Element Analysis of the Limit Load of Straight Pipes with Local Wall-Thinning Defects under Complex Loads

Yan Li, Bingjun Gao, Shuo Liu, Kaiming Lin, Juncai Ding

Applied Sciences· Volume 12· Issue 10

Abstract

Local wall thinning is a common defect on the surface of pipelines, which can cause damage to the pipeline under complex pipeline loads. Based on the study on the limit load of straight pipes with defects, the nonlinear finite element method was used to analyze the limit load of straight pipes with local wall-thinning defects under internal pressure, bending moment, torque, axial force, and their combinations, and the empirical limit-load equations of straight pipes with local wall-thinning defects under single and complex loads were fitted. Based on the allowable load on the equipment nozzles, the influences of torque and axial force on the load-bearing capacity of straight pipes with local wall-thinning defects were quantitatively analyzed. For medium and low-pressure equipment, the load-bearing capacity was reduced by 0.59~1.44% under the influence of torque, and by 0.83~1.80% under the influence of axial force. For high-pressure equipment, the load-bearing capacity was reduced by 10.07~20.90% under the influence of torque, and by 2.01~12.40% under the influence of axial force.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Integrity and Reliability Analysis · Fatigue and fracture mechanics · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China

Guangdong Institute of Special Equipment Inspection and Research Zhongshan Branch, Zhongshan 300072, China

Funding

National Key Research and Development Program of China

References (28)

Show source-provided references
1. Evaluation of local thinned pressurized elbows10.1016/S0308-0161(01)00125-9 ↗
2. Theoretical and Numerical Predictions of Burst Pressure of Pipelines10.1115/1.2767352 ↗
3. Assessment of effects of idealized defect shape and width on the burst capacity of corroded pipelines10.1016/j.tws.2020.106806 ↗
4. Failure pressure estimation error for corroded pipeline using various revisions of ASME B31G10.1016/j.engfailanal.2019.104284 ↗
5. Analysis and experiments on the plastic limit pressure of elbows10.1016/j.ijpvp.2006.08.003 ↗
6. Effect of local wall thinning on the collapse behavior of pipe elbows subjected to a combined internal pressure and in-plane bending load10.1016/j.nucengdes.2007.10.017 ↗
7. Effects of local wall thinning on net-section limit loads for pipes under combined pressure and bending10.1016/j.nucengdes.2008.10.019 ↗
8. Limit moment of local wall thinning in pipe under bending10.1016/S0308-0161(99)00031-9 ↗
9. Net-section limit load approach for failure strength estimates of pipes with local wall thinning10.1016/j.ijpvp.2006.03.001 ↗
10. Local buckling failure analysis of high strength pipelines containing a plain dent under bending moment10.1016/j.jngse.2020.103266 ↗
11. Plastic failure analysis of defective pipes with creep damage under multi-loading systems10.1016/j.ijmecsci.2017.04.028 ↗
12. Effect of corrosion on thin-walled pipes under combined internal pressure and bending10.1016/j.tws.2019.106218 ↗
13. (2012). Manual for Determining the Remaining Strength of Corroded Pipelines (Standard No. ASME B31G-2012).
14. (2016). Fitness-For-Service, the American Petroleum Institute and the American Society of Mechanical Engineers (Standard No. API 579-1/ASME FFS-1).
15. (2019). General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Safety Assessment for in-Service Pressure Vessels Containing Defects (Standard No. GB/T 19624-2019).
16. Plastic collapse analysis of defective pipelines under multi-loading systems10.1016/S0020-7403(99)00093-4 ↗
17. Plastic limit loads of defective pipes under combined internal pressure and axial tension10.1016/S0020-7403(02)00025-5 ↗
18. Lower and upper bound limit analyses for pipeline with multi-slots of various configurations10.1016/S0308-0161(99)00074-5 ↗
19. Simplified limit analysis of pipelines with multi-defects10.1016/S0141-0296(00)00009-2 ↗
20. Impact of axial stress on ultimate internal pressure of corroded pipelines
21. Limit Load Analysis of Elbow with Local Wall Thinning under Combined Loads10.4028/www.scientific.net/AMM.750.198 ↗
22. Burst pressure of corroded pipelines considering combined axial forces and bending moments10.1016/j.engstruct.2019.02.010 ↗
23. A novel model for prediction of burst capacity of corroded pipelines subjected to combined loads of bending moment and axial compression10.1016/j.ijpvp.2022.104621 ↗
24. (2008). General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Industrial Metal Pipeline Design Specification (Standard No. GB/T 50316).
25. Numerical and experimental investigation on limit load of elbow with local thinning area10.1016/j.ijpvp.2019.04.014 ↗
26. Limit loads for pipe bends under combined pressure and in-plane bending based on finite element limit analysis10.1016/j.ijpvp.2005.11.001 ↗
27. Guo, C.X., Li, P.N., and Jiang, X.D. (1999). Plastic Collapse Load Analysis of Circumferentially Cracked Pipes under Combined Loads of Axial Force, BendingMoment, Torsion and Internal Pressure. Press. Vessel Technol., 3–9.
28. Chen, G., Ja, G.D., Tao, X.R., Zuo, S.Z., and Sun, L. (2001). Numerical Analyses for Plastic Limit Loads of Local Wall-Thinning Pressure Piping Under Bending and Internal Pressure, Pressure Vessel Branch of Chinese Mechanical Engineering Society.